• Journal of the Korean GEO-environmental Society
• /
• v.21 no.11
• /
• pp.5-10
• /
• 2020

Although pile driver overturning accidents at construction site are not frequent, most leads to serious disasters. The main cause of accidents is uneven settlement of the ground. To prevent this, related guidelines such as KOSHA-C-101-2014, KOSH-A-GUIDE-71-2012, Occupational Safety and Health Standards, and NCS stipulate the installation of steel plates over ground. However, since the required steel plate thickness considering the self-weight of pile drivers and the underlying ground condition is not quantitatively presented, it is randomly applied in the field. In this study, the required minimum steel plate thickness was analyzed based on a numerical analysis (Plaxis 2D). Settlements and soil failure were calculated according to the different type of soils (sand, clay), load distribution and steel plate thickness (10mm, 20mm, 30mm, 40mm). Under all conditions, 10mm steel plate causes soil collapse. From thickness 20mm, the ground uneven subsidence is within 2° of the allowable leader angle.

• Convergence Security Journal
• /
• v.10 no.4
• /
• pp.31-37
• /
• 2010

The risks and threats in IT security systems to protect, prevent damage and Risk should be minimized. Context of information security products such as information processing, storage, delivery, and in the process of information system security standards, That is the basic confidentiality, availability, integrity and secondary clarity, potential evidence, detection, warning and defense capabilities, to ensure sufficient and should be. Web services are the most important elements in the security, the web nature of port 80 for the service to keep the door open as a structure, Web applications, web sources and servers, networks, and to hold all the elements are fundamental weaknesses. Accordingly, these elements through a set of Web application development errors and set-up errors and vulnerabilities in Web applications using their own home pages and web servers to prevent hacking and to improve the efficiency of Web services is proposed methodology performs security BMT.

• Fire Science and Engineering
• /
• v.24 no.4
• /
• pp.69-78
• /
• 2010

In this study, Fire Hazards were evaluated through computer simulation using FDS program for an apartment fire accident. The results of fire simulation showed that the maximum heat release rate in the case of no sprinklers activation was 7,700 kW which was about 16 times of that in the case of sprinklers activation, 497 kW and there was a very high fire hazard due to the backdraft phenomenon when the door of fire room was forced to open. Regarding the hazard time of fire room temperature and detection time of detectors, available evacuation time was 32.5 seconds of minimum to 53.5 seconds of maximum. In the case of sprinklers activation, fire hazard in the apartment was showed to be very low due to the fire control by the spray cooling of sprinklers. This study shows that what a important function for fire safety is the activations of fire sprinkler system and emergency alarm system and what a large loss can cause if these systems don’t activate in fire accidents.

• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.72-77
• /
• 2009

In the recycling procedure of the refrigerator, the fire frequently breaks out. In this study, to clarify the exact cause of the fire, the components and concentration of the materials produced in the process are analysed as well as the problems in the process system, and the protective measure to prevent the fire and the explosion fundamentally is proposed. In this procedure, the preventive measures of fire by removing the combustible materials such as polyurethane and inflammable gases, by removing the ignition sources and by reducing the oxygen concentration to the minimum are proposed along with the protective measures to reduce the damage in the fire. In the crushing procedure where the fire or explosion can break out in diverse ways, the forced ventilation or exhaust system applied to the small partial ventilation facility are installed to reduce the concentration of inflammable gas mixture to lower than the inflammable limit by injecting and exhausting the air forcibly.

• Fire Science and Engineering
• /
• v.30 no.5
• /
• pp.26-35
• /
• 2016

Sprinkler installations shall be operated at normal operating temperature of the atmosphere as a fire sprinkler head in any facility to control and extinguish the fire when the fire initially. Recently, however, some flush type quick response automatic sprinkler heads in slow fire place is a problem that can not be normal operation are raised. In this paper, by using the experimental model of the Apartment house of Commons and Cabinet burner size bedrooms fire conditions to form a slow growth rate and can supply more than 0.2 MPa pressure is the minimum pressure that can be applied inside the pipe in the field experiment was conducted. In the majority of experiments lush type quick response automatic sprinkler heads which is used in the country it was confirmed to be incompletely opened as the Cold Soldering occur. This phenomenon is likely to fail early fire suppression and control because they can cause the spread of fire and casualties needed to complement domestic product testing and type approval standards through additional research.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.23-34
• /
• 2013

This study would verify the validity of two transmission technology, 'Clear QAM' and '8VSB'. 'Clear QAM' and '8VSB', the transmisson technology, have been suggested as the concrete alternatives in the situation that half of subscriber of multi channel tv service have been still out of benefit from digital convert. In this study, we have shown that the introduction of 'Clear QAM' and '8VSB' should ease economical burdens and information minority group without extra set-top box. But there is another concern that it should negatively affect on the contents industry by a devaluation of the multi channel tv service or by an infringement of copyright. In these reasons, it is still difficult to solve the related concern, though the government have to set up the politic goal for the related industry as well digital convert. This study suggested that Korea Communication Commission consider above-mentioned technology temporarily, and reconsider 'Clear QAM' around the completion of the digital convert project.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.4
• /
• pp.341-348
• /
• 2016

The aim of this study is to suggest design requirements on the military barriers which are installed to reduce critical damage on protective facilities against sudden pin-point attacks caused by North Korean artilleries. For this purpose, site investigation and review of design drawings associated with barriers built in the contact areas are conducted. With identified data concerning barriers, the geometric modeling, which is used in the structural analysis, is performed. And then, the possible threat of North Korea is determined based on intelligence preparation of battlefields. Once the structural modeling and threat analysis are completed, structural damage on barriers and protective facilities are assessed in terms of impact, penetration, scabbing, and blast pressure effects. According to the analysis results, the thickness of barriers should be 450mm at least and current established barriers need to be structurally reinforced via sectional enlargement.

• Nuclear Engineering and Technology
• /
• v.2 no.2
• /
• pp.97-106
• /
• 1970

Radiation accidents which occured in the A.E.R.I. during last ten years are described (table 1). It seemed to the authors that some of these accidents were considered to be hazardous to man body and associated installations. This report deals with the following four major accidents involving body contamination incidents that our health physicists have been experienced. 1. Over-exposures (up to 130 rem) to the total body due to the mismanipulation in the Cobalt-60 gamma irradiation facility. 2. Floor surface contamination (up to 13 mrad/hr) and its spread out due to the mishandling of radioiodine contained in the bottle. 3. Body surface contamination and 0.36 uCi radioactivity accumulated in the thyroid gland of a worker due to the inhalation of gaseous iodine-131. 4. A void capsule due to the leakage out of the radium therapeutic source (3mg\ulcorner) These accidents were treated by definitely prompt action to protect the workers and associated installations from any radiation hazards and every possible efforts were made to confine the spread of radioactive contamination as small area as possible by means of elaborate decontamination work and monitoring.

• Journal of Navigation and Port Research
• /
• v.35 no.6
• /
• pp.495-500
• /
• 2011

This paper deals with development of an oil boom computation program (OBC Program) for effective response to oil spill. Currently, programs for showing required minimum quantities of oil skimmers and temporary storage tanks have been developed. However, a program for oil boom has not developed, which causes difficulties in oil spill management. The OBC program was developed using LabVIEW 2010 for solving above problems. The OBC program has following strengths: 1. Both experts and non-experts can calculate required quantities of oil booms, 2. The program can save response time, 3. It can reduce damage to properties and marine environment in proportion to reduced response time.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.745-749
• /
• 2012

국내 주요하천은 지속적인 산업화와 난개발로 인해 생태계파괴 및 수변생물의 서식처 환경 악화로 하천 생태계에 많은 악영향을 받고 있다. 그러나 1990년대 이후 국내에서는 하천의 기능과 생물의 다양성, 하천환경 및 생태학적인 가치와 중요성에 대한 인식이 매우 커짐에 따라 하천의 생태적 기능을 매우 중요시 하고 있으며, 하천의 난개발로 인한 피해를 복원하기 위해 활발한 연구가 진행되고 있다. 대표적인 연구로 생태계 건전화 개념을 도입하여 담수성 어류 서식처 제공 및 이동에 필요한 유량을 산정한 한국 수자원공사(1995)의 연구가 있으며, 김규호 등(1996a, 1996b)은 물고기 서식처 환경 중 특히 수심과 유속 등 수리조건을 유지하기 위한 최소유량 산정 방법을 제시하였다. 또한 노경범(2011)은 섬진강의 하천환경 회복을 위한 연구대상 구간에서의 대표어종을 선정하여 서식처 특성 파악을 위해 하천 특성을 연구하였다. 이와 같이 현재 국내에서도 하천의 기능과 생태학적 기능을 위한 노력과 연구가 진행되고 있다. 그러나 생태학적 서식처 연구에서는 아직까진 미진한 부분이 많이 있다. 그 예로 보호종이나 멸종위기어종과 같은 생물의 서식처 확보를 위한 연구가 아직까지는 많은 노력과 연구가 필요한 상태이다. 본 연구에서는 환경부에서 지정한 멸종위기 1급 어종인 퉁사리를 대상으로 서식환경 특성 연구를 진행하였으며, 퉁사리의 생태학적 서식특성과 현재 지석천 상류 유역에서 관찰되고 있는 서식구간을 중심으로 MD-SWMS (Multi-Dimensional, Surface Water Modeling System) 모형을 이용하여 수리특성 분석을 수행하였다. 이를 위해 하상재료 입도분석을 실시하였으며, 그 결과 입도가 큰 굵은모래 및 잔자갈, 굵은자갈로 구성되어 있음을 알 수 있었다. 또한, 수리학적 특성분석결과 서식구간 내에서는 비교적 빠른 유속이 나타났다. 이러한 퉁사리의 서식환경의 특성 분석으로 서식구간 내 입도가 큰 하상재료로 구성되어 있으며, 퇴적구간이 생성되지 않을 정도의 유사이송량과 유속이 필요할 것으로 분석되었다. 향후 퉁사리의 장기적인 서식환경 조성과 보존을 위해 대상구간의 유사이송의 연구와 실측 및 수변환경 모니터링을 통한 다양한 연구가 진행되어야 할 것으로 판단된다.