• Journal of the Korean Geographical Society
• /
• v.34 no.4
• /
• pp.371-384
• /
• 1999

디퓨젼 공식 모형은 한국 하천의 중.상류 지역의 하안 단구의 단구애와 같은 삭박 사면에 대한 연대 측정에 유용하게 적용될 수 있다. 지형 연대 측정 방법은 최대 사면각, 사면의 높이 등과 같은 사면단면에 대한 측정된 자료를 사용하는 보조적 연대 측정법의 하나이다. 토탄층에 대한 탄소연대측정법 또는 화분분석과 같은 방법으로 잘 통제되어진 연대를 이 모형에 적용하여 생성 연대를 모르는 다른 사면의 연대를 추정하는데 사용될수 있다. 적용사례로 경북 영양의 연지 저위단구에서 구해진 연대값 6ka를 이용하여, 최대 사면각과 사면의 높이간의 모의실험을 통해 연지 단구의 저위면/중위면 사이의 단구애 상의 삭박률 100 10-4m2/yr.을 구할수 있었다. 이 삭박률을 영춘 단구의 저위면/중위면 사이의 단구애의최대 사면각과 사면 연대간의 모의실험에 적용하여 영춘 단구의 저위면/중위면 사이의 단구애의 형성 시기를 약 37,000년 전으로 구할 수 있었다. 그러나 보다 정밀한 값을 얻기 위해서는 남한강 중.상류의 단구 지역에 대한 적절한 사면 측정 자료가 요구된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.331-337
• /
• 2016

Several foundation soil conditions below a homogeneous sand slope were assumed and slope stability analyses were conducted to determine the soil condition, in which a stabilizing pile can be used to increase the factor of safety against sliding. The assumed heights of the sand slope were 5m and 10m. For a 5m slope height, a stabilizing pile can be used in the foundation soil with a $15^{\circ}$ internal friction angle and a cohesion of 10kPa. For a 10m slope height, a stabilizing pile can be used in the foundation soil with a $20^{\circ}$ internal friction angle and a cohesion of 10kPa and a stabilizing pile can be used in the foundation soil with a $0^{\circ}$ internal friction angle and 40kPa, 45kPa and 50kPa of cohesion. According to the analysis results of stabilizing pile-reinforced foundation soil, the length of the stabilizing pile and magnitude of the maximum bending moment were strongly affected by the internal friction angle of the foundation soil. The lengths of stabilizing pile, for an internal friction angle of $0^{\circ}$ were 4.6, 8.0 times greater than those with an internal friction angle of $5^{\circ}$. The magnitude of the maximum bending moment of the stabilizing pile for an internal friction angle of $0^{\circ}$ was 24.6 times greater than that for an internal friction angle of $5^{\circ}$. Practically, a stabilizing pile cannot be used for foundation soil with an internal friction angle of $0^{\circ}$. Considering the results derived from this study, the effects of a stabilizing pile can be maximized for soft foundation soil that is embanked with a slow construction speed.

• Tunnel and Underground Space
• /
• v.18 no.6
• /
• pp.447-456
• /
• 2008

Open-pit mine slope design must be carried out from the economical efficiency and stability point of view. The overall slope angle is the primary design variable because of limited support or reinforce options available. In this study, the slope angle and critical slope height of large coal mine located in Pasir, Kalimantan, Indonesia were determined from safety point of view. Failure time prediction based on the monitored displacement using inverse velocity was also conducted to make up fir the uncertainty of the slope design. From the study, critical slope height was calculated as $353{\sim}438m$ under safety factor guideline (SF>1.5) and $30^{\circ}$ overall slope angle but loom is recommended as a critical slope height considering the results of sensitivity analysis of strength parameters. The results of inverse velocity analysis also showed good agreement with field slope cases. Therefore, failure of unstable slope can be roughly detected before real slope failure.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.8
• /
• pp.107-116
• /
• 2005

Generally, when the stability of the geosynthetic reinforced soil slopes is analyzed, the required tensile forces of each reinforcement layers are calculated from total reinforcement forces which are necessary to retain the equilibrium state of slip mass in which the slip surfaces are assumed to be a linear or bilinear. It is assumed that the reinforcement forces are increased or constant with depth. However, according to the instrumented field data and laboratory model test results, the maximum tensile strain of reinforcement in a reinforced soil slope is developed in a certain elevation, not a bottom of the slope. In the concept of reinforced soil, postulated failure surfaces are the traces of the position in which the reinforcement tensile forces are maximum in the layer, and the reinforcement tensile forces are related to the stress state on the postulated failure surface. Therefore, in this study, based on the distribution of normal stress on the slip surface, a new method for the evaluation of required tensile forces is suggested and a number of the instrumented field data are analyzed by newly suggested method. As a result, it is shown that the newly suggested method produces relatively accurate reinforcement tension forces.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.4
• /
• pp.233-237
• /
• 2003

This study was conducted to provide a rational forest management method for a natural oak (Quercus variavilis) forest stand in the central part of South Korea based on characteristics of growth and water relation parameters. Average volume per hectare was 175.1 ㎥ in the study site of oak stands. Basal area and volume of each direction appeared to increase as the slope direction moves from north to south, but annual mean increment and periodic annual increment of DBH for 10 years showed the lowest value at the southern aspect. Maximum water potentials measured between 12 and 14 o'clock were analyzed by direction and elevation in the oak stands. Water potential of oak decreased as the slope changed from the north to the south aspect and water potential increased at lower elevations. Soil water content for the oak stands tended to decrease as the aspect shifted from north to south. Water potential and soil moisture content were highly correlated. It appears that oaks have a higher moisture requirement at the southern aspect, because of stand density related to intraspecific competition.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.1
• /
• pp.18-23
• /
• 2004

This study was conducted to provide a national forest management method for natural Pinus densiflora forest stands in central South Korea based on growth characteristics and water relations. Average stand volume per hectare was 259.3㎥ in the pine study site. Basal area, volume, annual mean increment and periodic annual increment of DBH for 10 years at each slope aspect appeared to decrease as the aspect shifts from north to south. Stems per hectare showed the lowest value at the northern aspect. Maximum water potentials measured between 12 and 14 o'clock were analyzed by aspect and elevation. Water potential of pine decreased as the aspect changed from north to south, and water potential increased at lower elevations. Soil water content for the pine stands tended to decrease as the aspect shifted from north to south. Water potential and soil moisture content were highly correlated. Soil water deficits indicate that pines have a higher moisture requirement on the ridge and the southern aspect.

• Journal of the Korean Geographical Society
• /
• v.28 no.4
• /
• pp.285-297
• /
• 1993

For the application of the diffusion equation, slope height and maximum slope angle are calculated from the plotted slope profile. Using denudation rate as a solution for the diffusion equation, an apparent age index can be calculated, which is the total amount of denudation through total time. Plots of slope angle versus slope height and apparent age index versus slope height are useful for determining relative or absolute ages and denudation rates. Mathematical simulation plots of slope angle versus slope height can generate equal denudation-rate lines for a given age. Mathematical simulations of slope angle versus age for a given slope height, for equal denudation-rate at a particular profile site, and for comparing to other sites having controlled ages.

• The Journal of Engineering Geology
• /
• v.4 no.3
• /
• pp.343-356
• /
• 1994

When most of the industry and social indirect facilities such as the large structure, power plant or road, rail-road are constructed, the new slope may lead to the slope failure. The failure models for slopes have been developed by using the results of in-situ and laboratory tests to investigate the mechanisms and types of the slope failure. The safety factor of a slope may be obtained based on the proposed model and the slope can be reinforced to meet the design criteria. The slope should be reinforced by using the optimum model that properly reflects the site condition, the method of reinforcement includes the increased safety factor either by decreasing a slope angle or by reinforcing the slope.

• Economic and Environmental Geology
• /
• v.38 no.3 s.172
• /
• pp.305-317
• /
• 2005

This study addresses the preliminary results of rock slope stability analyses including hazard assessments for slope failure conducted on the selected sections of rural road cut slope which are about 4 km long. The study area is located in the Mt. Chuntae northeast of Busan and mainly composed of Cretaceous rhyolitic ash-flow tuff', fallout tuff, rhyolitc and andesite. The volcanic rock mass in the area has a number of discontinuities that produce a potentially unstable slope, as the present cut slope is more than 70 degrees in most of the slope sections. Discontinuity geometry data were collected at selected 8 scanline sections and analyzed to estimate important discontinuity geometry parameters to perform rock slope kinematic and block theory analyses. Kinematic analysis for plane sliding has resulted in maximum safe slope angles greater than $65^{\circ}$ for most of the discontinuities. For most of the wedges, maximum safe cut slope angles greater than $45^{\circ}$ were obtained. Maximum safe slope angles greater than 80" were obtained fur most of the discontinuities in the toppling case. The block theory analysis resulted in the identification of potential key blocks (type II) in the SL4, SL5, SL6 and SL8 sections. The chance of sliding taking place through a type ll block under a combined gravitational and external loading is quite high in the investigated area. The results support in-field observations of a potentially unstable slope that could become hazardous under external forces. The results obtained through limit equilibrium slope stability analyses show how a stable slope can become an unstable slope as the water pressure acting on joints increases and how a stable slope under Barton's shear strength criterion can fail as the worst case scenario of using Mohr-Coulomb criterion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2810-2818
• /
• 2009

In order to examine the characteristic of shallow failure in cut slopes composed of weathered granite soil, this study calculated critical permeability coefficient according to rainfall characteristic in Korea, performed stability analysis according to the representative physical properties of weathered granite soil distributed in Korea such as horizontal distance to the failure surface of cut slope, slope inclination, slope height, and the depth of wetting by rainfall, and analyzed the results. In the results of analyzing critical permeability coefficient, when the local rainfall characteristic was considered, the maximum critical permeability coefficient was $7.16{\times}10^{-4}cm/sec$. We judged that shallow failure according to wetting depth should be considered when rainfall below the critical rainfall intensity lasts longer than the minimum rainfall duration in cut slopes composed of weathered granite soil, which had a critical permeability coefficient lower than the maximum critical permeability coefficient. Furthermore, using simulated failure surface, this study could understand the characteristic of shallow failure in cut slopes based on the change in slope safety factor according to horizontal distance, wetting depth, and strength parameter.