• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.11
• /
• pp.759-765
• /
• 2017

In this study, a three-dimensional least-square, level-set-based two-phase flow code was developed for the simulation of three-dimensional sloshing problems using finite element discretization. The code was validated by solving some benchmark problems. The proposed method was found to provide improved results against other existing methods, by using a coarser mesh. The results of the numerical experiments conducted during the course of this study showed that the proposed method was both robust and accurate for the simulation of three-dimensional sloshing problems. Using a substantially coarse grid, historical results of the dynamic pressure at a selected position corresponded with existing experimental data. The pressure history with a finer grid was similar to that of a coarse grid; however, a fine grid provided higher peak pressures. The present method could be extended to the analysis of a sloshing problem in a complex geometrical configuration using unstructured meshes owing to the features of FEM.

• The Korean Journal of Vision Science
• /
• v.20 no.4
• /
• pp.413-420
• /
• 2018

Purpose : We present a novel method for the analysis of blue light applied by the analysis method of David L. with optical experiment and blue light by measuring the transmittance by dividing it by the refractive power in the spectacle lens made by MR8. Methods : The lenses of -8.00D, -7.00D, -6.00D, -5.00D, -4.00D, -3.00D, and 0.00D manufactured by MR8 being sold in the market, were selected. The transmittance was measured at the intervals of 5 nm from 200 to 1000 nm with UV-VIS Spectrophotometers (SolidSpec 3700), and they were in range of the blue light (380 to 500 nm) analyzed by a David L.'s analysis method. Results : All of the MR8 lenses selected for this study almost completely blocked at the UV range. A lens of -8.00D was measured as the lowest transmittance of 59.56% in the blue light area and low values were measured at the blue areas 1 and 2 according to the analysis of David L.In the infrared ray area, the transmittance of all lenses gradually decreased. The average value of the luminous transmittance was 23.67% ~ 26.33% and then gradually decreased from -4.00D. Conclusion : Applying the analysis of David L., a minimum of 41.28% and a maximum of 46.60% were measured at the blue light 1 area and a minimum of 87.30% and a maximum of 97.55% were measured at the blue light 2 area. A minimum of 86.83% and a maximum of 96.55% were measured at the blue light 3 area, and the average was 94%. The luminous transmittance of the -3.00D lens was 26.33%, which was the highest, and that -8.00D was 23.67%, which was the lowest.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.148-151
• /
• 2011

본 연구의 목적은 농촌진흥청 국립원예특작과학원 감귤시험장에서 개발된 감귤 다공질 필름 멀칭재배법의 기술가치를 평가하는 것이다. 이는 농업 R&D사업의 효율성과 실용성 제고를 위하여 이용될 수 있을 것이다. 분석결과에 따르면, 감귤다공질 필름 멀칭 재배법 개발에 따른 기술가치평가액은 할인율 수준에 따라 최소 421.64억 원(할인율 10%)에서 최대 550.18억 원(할인율 6%), 평균 480.34억 원(할인율 8%)으로 추정되고, 내부수익율 IRR의 값은 가정했던 할인율(6%~10%)보다 훨씬 크고, 순현재가치(NPV)는 영보다 훨씬 크며, B/C 비율도 20 이상으로 나타나 감귤 다공질 필름 멀칭 재배법 개발사업의 경제적 타당성은 있는 것으로 판단된다.

• Communications for Statistical Applications and Methods
• /
• v.19 no.1
• /
• pp.65-75
• /
• 2012

In setting an experimental design for the prediction outside the experimental region (extrapolation design), it is natural for the experimenter to be very careful about the validity of the model for the design because the experimenter is not certain whether the model can be extended beyond the design region or not. In this paper, a hybrid constrained type approach was adopted in dealing model uncertainty as well as the prediction error using the three basic principles available in literature, maxi-min, constrained, and compound design. Furthermore, the effect of the distance of the extrapolation design point from the design region is investigated. A search algorithm was used because the classical exchange algorithm was found to be complex due to the characteristic of the problem.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1391-1407
• /
• 1990

In this paper, optimization procedures are presented considering the static and dynamic constraints for laminated composite plate and hybrid laminated composite plate subject to concentrated load on center of the plates. Design variables for this problem are ply angle or ply thickness. Deflection, natural frequency and specific damping capacity are considered as constraints. Using a recursive linear programming method, the nonlinear optimization problems are solved. By introducing the design scaling factor, the number of iterations is reduced significantly. Composite plates could be designed optimally combined with FEM analysis under various conditions. In the optimization procedure, verification for both analysis and design of the laminated composite plates are compared with the results of the others. Various design results are presented for the laminated composite plates and hybrid laminated composite plates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8C
• /
• pp.821-826
• /
• 2003

In this paper, constrained Remez exchange algorithm is proposed to reduce the critical path of an IIR filter. The proposed algorithm is based on Remez exchange algorithm and least squares method. By IIR filter design examples, it is shown that the proposed method can maximally increase speed by 20%.

• Korean Journal of Bronchoesophagology
• /
• v.3 no.1
• /
• pp.50-60
• /
• 1997

조기후두암은 치료 목표는 생명을 구하면서 동시에 후두기능을 최대한으로 보존하는 것이라고 할 수 있는데, 치료자의 철학과 환자의 선호도에 따라 방사선 치료, 레이저 수술 그리고 후두부분적출술 등의 방법이 적용되고 있다. 어떤 치료 방법이던 재발암에 대한 구제치료를 포함하면, 궁극적인 생존율은 거의 비슷하다. 그러므로 일차 치료후 얼마나 적극적으로 환자를 추적관찰하고, 적절한 구제수술을 시행하느냐에 따라 생명의 보존 그리고 재발암에서의 기능의 보존 여부가 좌우된다고 할 수 있다. 향후 보다 체계적인 추적 관찰법과 최소의 환자 부담으로 최대의 성과를 거둘 수 있는 치료방법 이 연구되어져야겠다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.277-287
• /
• 2017

This paper describes the specifications on balanced steel ratio and maximum reinforcement for the design of RC flexural members by the Korean Highway Bridge Design Code based on limit states design. The Korean Highway Bridge Design Code (Limit States Design) is not provide for the balanced steel ratio specification for the calculation of required steel area of RC flexural members design. The maximum steel area limited the depth of the neutral axis at the ultimate limit states after redistribution of the moment, and also recommended the maximum steel area should not exceed 4 percent of the cross sectional area. However, from the maximum neutral axis depth provisions should increase the cross section is calculated to be less the maximum reinforcement area, and according to the 4% of the cross sectional area of the concrete, the tensile strain of the reinforcement is calculated to be greater than double the yielding strain, so can not guarantee a ductile behavior. This study developed a balanced reinforcement ratio that is basis for the required reinforcement calculation for tension-controlled RC flexural members design in the ultimate limit states verification provisons and material properties and applied the ultimate strain of the concrete compressive strength with a simple formular to be applied to design practice induced. And assumed the minimum allowable tensile strain of reinforcement double the yielding strain, and applying correction coefficient up to the ratio of maximum neutral axis depth, proposed maximum steel ratio that can be applied irrespective of the reinforcement yield strength and concrete compressive strength.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.671-684
• /
• 2022

This study verified the stability of a high-strength combined buried pile retaining wall and its applicability in the field. A cast-in-place (C.I.P) retaining wall and the high-strength combined embedded pile retaining wall were compared and analyzed numerically. The numerical analysis assessed the ground behavior and stability (and thus field applicability) of a high-strength combined buried pile retaining wall using data measured in the field. The experimental results showed that the cross-sectional force and displacement of the high-strength bonded pile retaining wall were reduced by 13.6~19.7%, the shear force increased by 0.7~4.7%, and the bending moment increased by 4.5~8.8% relative to the values for the C.I.P retaining wall. Examination of the amount of subsidence in the ground around the excavation showed that the maximum settlement of the C.I.P retaining wall was 46.89 mm and that at the high-strength combined buried pile retaining wall was 39.37 mm. Overall, designing a high-strength combined embedded pile retaining wall by applying the maximum bending moment and shear force calculated using the elastic beam method to the site ground was shown to achieve the safety of all members, as member forces were generated within the elastic region.

• ICROS
• /
• v.6 no.4
• /
• pp.38-48
• /
• 2000

Abstract :본 논문에서는 관리제어시스템의 동적특성을 허용언어(admissible language) 범위 이내에서 최적화시키는 최적 관리제어기법들을 소개한다. 본 논문에서 주로 다루고자 하는 최적 관리제어기법은 Kumar와 Garg에 의해 제안된 기법과 Cho와 Lim에 의해 제안된 계층적 최적 관리제어기법, 그리고, Sengupta와 Lafortune이 제안한 최적 관리제어기법 등이다. 첫 번째 기법에서는 우선 시스템의 최적화를 위해 고려되고 있는 비용함수(cost function)를 소개한 후, 최대흐름 최소분할생성 정리(max-flow min-cut theorem)를 이용한 최적 관리제어기 설계기법을 제시하고, 이를 부분관측 하에서도 최적 관리제어기를 설계할 수 있도록 확장한다. 그런 후 제시된 설계기법에 의해 설계된 관리제어시스템에서 발생 할 수 있는 문제점들을 지적하고, Cho와 Lim에 의해 제안된 완전 최소분할생성(complete min-cut)이라는 개념을 도입하여 지적된 문제점들을 해결할 수 있는 방법을 제시한다. 또한 시스템의 고장을 고려한 계층적 최적 관리 제어(layered optimal supervisory control)기 법을 소개한다 그리 고 마지막으로 Sengupta와 Lafortune이 제안한 최적 관리제어기법에 대해서 살펴본다.