• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.20-20
• /
• 2009

치아의 치석제거 및 치골절삭에 사용되는 초음파 스케일러는 일반적으로 마그넷형과 압전형으로 구분할 수 있으며, 최근에 들어 소형화, 저전력, 정밀성, 저비용 등의 장점으로 인해 압전형이 주로 사용되고 있다. 국내의 대부분의 치과에서 한 대 이상 운용되는 초음파 스케일러는 대부분 유럽 제품으로며, 국내에서는 이를 대체하기 위한 제품이 출시되고 있으나 아직까지 유럽 제품에 비해 출력강도, 정밀도 등에서 성능이 모자란 현실로 시장에서 외면 받고 있다. 본 연구에서는 앞서 언급한 압전 초음파 스케일러에 대한 체계적인 연구를 진행하여 외국에 비해 상대적으로 성능이 떨어지는 초음파 스케일러의 성능을 개선하고자 하였다. 이를 위하여 스케일러의 진동 발생부, 즉 압전 세라믹과 SUS 재질의 head, tail 부로 구성된 진동발생부의 최적구조톨 도출하기 위하여 유한요소 해석을 실시하였으며, 스케일러의 중심주파수 28kHz에서 최대 출력이 발생할 수 있는 구조를 도출하였다. 스케일러의 Head 와 Tail 부문의 두께와 직경, 길이 변화에 따른 중심주파수 및 출력 변위의 경향분석을 실시하였으며, 이상의 결과를 바탕으로 실제 스케일러를 제작하여 시뮬레이션의 유효성을 검증하였다. 이상의 과정으로 거쳐 개발된 압전 초음파 스케일러는 다양한 Tip 종류의 영향을 최소화할 수 있으며, 중심주파수는 28~30kHz 에서 뛰어난 성능을 나타내어 기종 유럽제품의 성능을 앞지르는 특성을 확보할 수 있었다.

• Journal of Internet Computing and Services
• /
• v.25 no.1
• /
• pp.137-146
• /
• 2024

drones are used in a variety of fields, including business, leisure, lifesaving, and war. Various research using drones is being conducted in the military. In particular, the use of drones in 『Manned-Unmanned Complex combat performance plan』, powered by various unmanned vehicles deployed in the Army TIGER system, is expected to be a major factor realizing the Army's future combat performance that minimizes damage to ally combat troops while causing maximum damage to the enemy. As the deployment of various systems progresses, combat performance methods utilizing each system are evolving, but there is a lack of research to identify and resolve limitations in the perspective of unmanned vehicle operators. Based on the Ukrainian military's FPV drone combat case, we would like to make suggestions from the operator's perspective on overcoming perspective limitations through the introduction of FPV and the designation of military drone frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.484-493
• /
• 2009

For the flexible frequency utilization, cognitive radio technique has been prominently considered. The most important requirement in cognitive radio networks is to protect the communications of primary users. Spectrum sensing task by secondary users should be seriously considered in cognitive radio networks, since the spectrum sensing process makes their current quality of service worse. In this paper, we propose the channel sensing scheduling method that keeps the requirements for protecting the primary and guarantee the secondary user's quality of service as possible. The quality of service of secondary user is analyzed in terms of packet delay and loss while the protection-requirements in terms of sensing interval and sensing time predefined. In numerical analysis, we can get appropriate parameters which guarantee QoS in various environment. And simulation results show that this method can improve the performance, delay and the number of transmitted packets against consecutive sensing method.

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.193-200
• /
• 2024

This paper describes the design and development of a transmit receiver module(TRM) for mounting on X-band SAR of the NEXTSat-2. The TRM generates the chirp signal with required bandwidth through the DDS in X-band and performs frequency conversion, combination for the signal to transmit and be received and frequency synthesis. Tx path of the TRM produces signals of total 28 bandwidths up to 96.8 MHz and has output signal level of more than + 9.37 dBm. Rx path of the TRM has minimum noise figure of 15.7 dB. The measurement results show that required requirements are satisfied. The TRM is installed on the NEXTSat-2 flight model(FM), launched by KSLV-II(Nuri) on May 23, 2023 and currently operational.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.8
• /
• pp.395-402
• /
• 2006

When an active SONAR works in the subsurface. its detection Performance is limited by the reverberation. The winds Play a primary role in the Production of bubbles in the ocean. And the bubbles as efficient scatters contribute to the reverberant field. In this Paper the effects of wind-generated bubbles on sound propagation in the subsurface are investigated as a mid-frequency Hull-mounted SONAR works. The active signal excess is calculated at source depths 3. 5. and 10m considering bubble layer for frequencies 5. 7.5, and 10kHz. The change of the near-surface sound speed tend to increase surface reverberation levels and change the active signal excess. In the 10m/s winds. the maximum detection range reduces over 3km through the near-surface . The reason is the upper refraction due to the wind-generated bubbles.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.4
• /
• pp.545-551
• /
• 1998

The Radio communication by existing SSB, VHF, etc. in a coast station and a base station for military affairs is still used to a very important the device of information delivery or transmitting and receiving by the remote controller to using to the exclusive cable for a equipment established at a long distance. When a number of consumer to connected and operated by a number of transceiver is essential for a circuit controller of ICS, in KOREA, is devoted by import to considerable quantity because of to be delayed development of this field. This Paper has been realized to optimal algorithm and designing of a circuit connection controller by multi-processor to pre-stage for the development of ICS. The H/W is composed able to remote control to circuit connector with the several slave processor and a processor for master, and this has taken possible through without any obstacle to communication circuits of a control signal by FSK system. The S/W make possible monitoring for communication condition of other circuits by means of a serial communication system by the multi-processing. This paper has been studied for connecting to a circuits wished to rapidly and precisely by the full application to a interrupt technique. A technique to control by remote to a number of transceiver is a way increasing to application for a frequency resource of the limited MF/SF, VHF and the existing radio communication technique. According to, this paper will achieve to be the reduction of energy & equipment and multiplicity of information delivery in the general communication and disposal to rapid and exact for the important communication as distress, urgency and safety on the sea.

• 전기의세계
• /
• v.29 no.3
• /
• pp.170-176
• /
• 1980

이 논문은 제어신호가 이상적인 포화특성을 갖은 제작조건하의 시불변, 선형 제어계의 시최적화 제어기구의 설계이론을 비교 연구하는데 목적을 두었다. 어떤 초기상태에 있는 계를 특정된 최종상태로, 최단시간내에 이행시켜 가는데 요구되는 제어기구의 설계문제는 여러해 동안 흥미있는 연구과제로 학계에 등장되었고 이러한 문제를 처리하는데에는 여러가지의 설계방법이 제안되어 왔다. 이 논문에서는 이러한 최적화 제어기구의 설계 이론중, 상태천이법에 의한 방법, 최대원리의 적용에 의한 방법 및 동적 프로그래밍기법에 의한 방법들을 서로 비교하여 2차계의 시최적화 설계사례에 이들을 적용시킴으로써 그 설계법상의 문제점을 비교 검토하여 보려는데 목적을 두었다. 설계사례 2차계는 시불변, 선형인 것으로 가정하였으며, 초기상태벡터 및 최종상태벡터는 모두 특정된 값으로 지정되고 제어신호는 이상적인 포화특성으로 제약받으며 스윗칭 시간이 유한크기가 아닌 정규형인 경우에 한정시켜 다루었다. 어느 설계이론을 적용시키나 시최적화를 위한 제어측은 단속제어방식으로 결과되었으나, 시최적화 문제의 특수성때문에 최대원리 및 동적 프로그래밍기법의 적용사례에서는 자연경계조건 및 Transversality 조건 등이 스윗칭시간 또는 최종시간을 직접 결정하여 주는 관건은 되지 못하였으며 계통의 상태방정식 또는 보조상태방정식을 구속제약된 양단상태량을 만족하도록 최적에어측을 적용하여 풀므로써 스윗칭시간과 최종시간이 얻어진다. 따라서 어느 한가지 방법의 적용만으로는 수학적인 처리상의 애로는 피할길이 없었으며 Hamiltonian함수의 변화성질을 보조적으로 활용하여 가면 이러한 번거로움이 덜하여 지긴하나, 다루는 계통의 차수가 높을 수록 이러한 수치해를 얻기위한 번거로움은 여간한 험로가 아닌 것으로 생각된다. 결론적으로 이러한 시최적화문제의 설계에는 몇가지의 혼용적용이 바람직하다고 결론된다. 이의 개발에 박차를 가하지 않을 수 없는 것이다.고, 우선 여기서는 당면문제로서 대처하지 않으면 안될 자동주파수제어문제및 계통의 경제운용문제만에 한정하여, 이것을 우리나라의 현상과 관련시켜 개설하고, 이들의 자동화에 관한 기본적인 문제를 간단히 적어 보겠다. 가능하다. 제작완료된 ASIC은 기능시험을 완료했으며 실제 line-of-sight(LOS) 시스템 구현에 적용중이다. 시대를 살아 갈 회원들이다. '컨텐츠의 시대'가 개막되는 것이며, 신세기통신과 SK텔레콤은 선의의 경쟁 과 협력을 통해 이동인터넷 서비스의 컨텐츠를 개발해 나가게 될 것이다. 3배가 높았다. 효소 활성에 필수적인 물의 양에 따른 DIAION WA30의 라세미화 효율에 관하여 실험한 결과, 물의 양이 증가할수록 그 효율은 감소하였다. DIAION WA30을 라세미화 촉매로 사용하여 아이소옥탄 내에서 라세믹 나프록센 2,2,2-트리플로로에틸 씨오에스터의 효소적 DKR 반응을 수행해 보았다. 그 결과 DIAION WA30을 사용하지 않은 경우에 비해 반응 전환율과 생성물의 광학 순도는 급격히 향상되었다. 전통적 광학분할 반응의 최대 50%라는 전환율의 제한이 본 연구에서 찾은 DIAION WA30을 첨가함으로써 성공적으로 극복되었다. 또한 고체 염기촉매인 DIAION WA30의 사용은 라세미화 촉매의 회수 및 재사용이 가능하게 해준다.해준다.다. TN5 세포주를 0.2 L 규모 (1 L spinner flask)oJl에서 세포간의 응집현상 없이 부유배양에 적응,배양시킨 후 세포성장 시기에 따른 발현을 조사한 결과 1 MOI의 감염조건 하에서는 $0.6\times10^6$cell/mL의 early exponential시기의 세포밀도에서 72시간 배양하였을 대 최대 발현양을 나타내었다. 나타내었다. $\beta$4 integrin의

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3121-3129
• /
• 2009

Conventional marine radar systems utilize pulse radar which is capable of high-power transmissions and is effective for remote detection purposes. A pulse radar is most commonly used on medium or large vessels due to its expensive installation and maintenance costs. I propose the use of a Frequency Modulated Continuous Wave (FMCW) radar system operated at low-power and high-resolution instead of the conventional pulse-radar based system. The transmitted and received signals of the FMCW radar system were theoretically analyzed and radar signal processing design and simulation experiments were performed to detect the range and speed. Intermediate Frequency (IF) signal mixed with virtual transmit and receive signals were generated to perform FMCW radar signal processing simulations where the IF signal underwent noise reduction through a lowpass filter. The maximum frequency was derived through the sample interval of the FFT size instead of using A/D converter. This maximum frequency was used to get the frequency range and frequency speed which were in turn used to calculate the range and speed. The virtual beat frequency generated using MATLAB is utilized to analyze the beat frequency used in the actual FMCW radar system signal processing. The differences in the range and speed of the beat frequency signals are processed and analyzed.

• Journal of Broadcast Engineering
• /
• v.18 no.3
• /
• pp.445-454
• /
• 2013

By using the radio propagation prediction of Rec. ITU-R P.1546, geographic information system, and S-I plane, we presented the methodology of interference analysis based on the minimum coupling loss, and also suggested the local coordinate system for calculating azimuth and elevation angles between the victim receiver and the interferer for an arbitrary antenna pattern. To check the presented algorithm, the map with the land-sea mixed area was taken for the given area of $80{\times}60[km^2]$ as real geography information. Field strength, path profile, and protection ratio with maximum allowable interference level have been illustrated for radar and fixed wireless system for the assumed frequency. In addition interference power of the victim receiver was calculated asa function of azimuth and elevation angles of the interferer. The developed methodology of interference analysis in the VHF and UHF bands can be actually applied to assess interoperability as well as compatibility in the civil or military applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1973-1980
• /
• 2017

In the case of a small UUV operating an active synthetic aperture sonar, various velocity disturbances may occur on the path due to the influence of external underwater environment, and this causes phase errors in coherent synthetic aperture processing, which has a large influence on the detected image. In this paper, when a periodic sinusoidal velocity disturbance is generated in the traveling direction, the phase generated by the round trip slope range at each position is estimated the cross correlation coefficient for multiple received signals and compensated the position variation in the overlapped DPC by the average value within the maximum allowable width. Through simulations, it has been confirmed that the images degraded by the velocity disturbance amplitude and fluctuating frequency of the UUV are removed from the false targets and the performance of azimuth resolution is improved by the proposed phase compensation method.