• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.71-82
• /
• 2018

This study presents a reasonable and economical DCM reinforcement length for the various factors (the embankment height, the distance from the embankment to the underground structure, the depth of the soft ground, and the compression index and the swelling index of the soft ground) that affect the stability of the structure due to lateral movement. Based on these results, we analyzed each factor's degree of influence and figured out which factor influenced the lateral movement most. The cross section of the embankment on the soft ground was modeled by using the Finite Element Program and reinforced with DCM. The results show that the increase rate of the reinforcement length with the increase of the embankment height is about 9~50%, the increase rate of the reinforcement length with the depth of soft ground is about 13~30%, and the increase rate of the reinforcement length with increasing compression index is about 3~25%. In addition, the influence of each factor on each other was analyzed. As a result, among the separation distance, the compressive index and the maximum to minimum slope ratio of the reinforcement length of the embankment height, the separation distance was the largest for the depth of soft ground. As the depth of the soft ground increases, the ratio of the maximum to minimum slope of the reinforcement length according to the embankment height is 3.75, the ratio of the maximum to minimum slope of the reinforcement length according to the spacing distance is 4.3, and the ratio of maximum to minimum slope according to compression index is 2.5. From these results, it is confirmed that the three factors are greatly affected by the depth of soft ground.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.324-334
• /
• 2024

The Wavefront Curvature Ranging (WCR) is an estimation method for a source range from the wavefront curvature of acoustic waves. The conventional method uses trigonometry to estimate the source range by assuming the sound speed as a constant. Because of this assumption, range error occurs in the ocean environment where the bottom reflection is clearly separated. In order to reduce the range error, Matched Wavefront Curvature Ranging (MWCR) was proposed applying the sound speed structure in the ocean environment and Maximum Likelihood Estimation (MLE). The range error was reduced in the results of the simulation on the proposed method. In the future, this method will be applicable to the sonar system if the reliability of ranging is confirmed by measured signal.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.3
• /
• pp.5-13
• /
• 2003

The soil nailing is one of the useful support-system in urban excavation because of the presence of other structures in the vicinity Since the soil nailing system was introduced, model experiments and theoretical studies have been performed to investigate behavior of soil nailed wall. However, there are few data in the case of multi-layered soil strata just like Seoul Metropolitan area in Korea. The feed back analyses are carried out using the measured wall displacement data for soil nailing construction sites with multi-layered strata in order to analyze the distance and the coefficients of extension zone of ground behind soil nailed wall. As a result, the distance of extension zone increased with increasing of the final excavation depth and the ratio of the distance to the final excavation depth was shown to be about 94% of the final excavation depth. Also, the coefficients of extension zone increased with enlargement of soil layer thickness and converged into constant value of 1.05. On the other hand, the maximum vertical displacements by the feed back analysis and Caspe's method were shown to be approximately 80%, 150~280% of the maximum horizontal displacement respectively.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.297-306
• /
• 2000

Lateral cephalometric X-ray films in maximal intercuspation and maximal opening of 68 children were taken and analyzed to examine the pattern of condylar movement and to study the relationship between opening movement and morphologic factors of craniofacial skeleton. The results were as follows : 1. The mean value of maximal opening capacity was 47.1mm, condylar moving distance was 18.1mm, horizontal condyle movement was 17.5mm, vertical condyle movement was 3.8mm and condylar moving angle was $13.1^{\circ}$. 2. The maximal opening capacity had positive relationship with the length of anterior cranial base, mandible and maxillary complex and with posterior facial height and had negative relationship with articular angle, sagittal jaw relationship. 3. Vertical condyle movement and condylar moving angle had positive relationship with articular angle and had negative relationship with gonial angle. 4. Horizontal condyle movement and condylar moving distance had positive relationship with the length of maxillary complex.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.600-605
• /
• 2015

조정은 작은 속도차이가 경기에 큰 영향을 미치는 스포츠이다. 이에 따라 노 주변 유통에 대한 다양한 연구가 진행되어왔지만 정작 노 블레이드를 어떠한 형상으로 설계해야 어떤 영향에 의해 노의 성능이 향상되는지에 대한 연구는 이루어지지 않았다. 본 연구에서는 4-digit NACA 익형 캠버 식을 이용하여 최대 캠버와 최대 캠버 위치를 변화시켜가며 노의 추진력과 효율을 모두 높이는 노 블레이드 형상을 찾아보았다. 연구 결과 최대 캠버의 크기가 크고 최대 캠버의 위치가 블레이드 압전에 가까이 위치할수록 노의 추진력과 효율이 향상되는 것을 확인하였다. 본 연구의 실험 범위에서는 최대 캠버와 최대 캠버의 위치가 각각 시위길이의 4%, 20%인 노 블레이드의 경우 블레이드가 평판인 경우보다 배의 평균속도를 0.18m/s 향상시켰으며, 이는 실제 경기에서 57.2m의 거리 차와 약 13초의 기록차이를 가져온다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.201-207
• /
• 2018

There is no known polynomial time algorithm for random-type quadratic assignment problem(RQAP) that is a NP-complete problem. Therefore the heuristic or meta-heuristic approach are solve the approximated solution for the RQAP within polynomial time. This paper suggests polynomial time algorithm for random type quadratic assignment problem (QAP) with time complexity of $O(n^2)$. The proposed algorithm applies one-to-one matching strategy between ascending order of sum of distance for each location and descending order of sum of quantity for each facility. Then, swap the facilities for reflect the correlation of distances of locations and quantities of facilities. For the experimental data, this algorithm, in spite of $O(n^2)$ polynomial time algorithm, can be improve the solution than genetic algorithm a kind of metaheuristic method.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.203-204
• /
• 2008

한의학 진단의 중요 요소인 맥진을 자동화한 맥진기에서뿐만 아니라 비관혈적 심혈관 기능 평가를 위해서 요골동맥 맥파 측정이 널리 활용되고 있다. 요골동맥 맥파는 피험자의 생리적, 병리적 원인을 통제하더라도 가압력이 변함에 따라 형태가 달라지며, 어느 시점 맥파를 피험자의 상태를 대표하는 맥파로 해야 할지에 대한 명확한 기준이 없어 맥압이 최대가 되는 시점의 맥파를 사용하고 있다. 그러나, 맥파가 측정되는 가압력 범위뿐만 아니라 맥압이 최대가 되는 시점이 피험자마다 다르기 때문에 정확한 대표 맥파를 획득하기 위해서는 보다 가압력 단계를 늘려야 하며, 결과적으로 측정시간이 보다 길어지게 될 것이다. 본 논문에서는 최소한의 가압단계로도 보다 정확히 대표 맥파를 획득할 수 있는 방법을 개발할 수 있도록, 정밀 제어가 가능한 가압 로봇 축, 가압에 의해 눌리는 피부이동 거리 측정을 위한 레이저 센서, 가압에 따른 피부 반발력과 맥파를 측정할 수 있는 압력 센서로 구성된 테스트 지그를 개발하였다. 이를 통해 모터 이동 스텝 수에 따른 피부 이동 거리 특성, 피부 이동 거리에 따른 맥파 변화 특성 등을 관찰할 수 있었으며, 향후 효과적인 대표 맥파 획득 방법을 개발할 수 있을 것으로 기대한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.12
• /
• pp.2505-2510
• /
• 2011

In this paper, we consider to obtain the criteria for maximal power of interfering transmitter according to distance between WiBro and WLAN in TVWS. We analyze this criteria as a parameter for co-use when hetero systems share the same frequency channels. In order to make an analysis of relationship between distance and power of two systems, we take into consideration on two cases. First, WiBro is an interfering transmitter and WLAN is a victim receiver. Second, WLAN is an interfering transmitter and WiBro is a victim receiver. Analyzed coexistence results under various co-use scenarios may be widely applied into the technique developed to get the coexisting condition for wireless devices using many communication protocols in same frequency.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.8
• /
• pp.385-393
• /
• 2008

The best coverage problem is finding a path whose worst distance to the sensor-set is the best among all paths. Instead, if the user stays close to its nearest two sensors, then the stability of the wireless connection may be guaranteed. So we consider the problem of finding a second best coverage path; given the sensor set U, a starting point s and a target point t, find a path whose worst distance to the second closest sensor is minimized. This paper presents an O(n logn) -time algorithm to find such a path. We also give experimental evidence showing that the connection to the sensor-set along a second best coverage path is more stable than that along the best coverage path.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.127-130
• /
• 2009

In this paper, we introduce a Y/T(Yard Tractor) Multi-Cycle System on the basis of RTLS that improves a low efficient loading and unloading. In the proposed approach, we apply the best suited algorithm looking for seeking of the optimum path and the shortest movement distance. In this paper, Our experiment results show that rate of a driving distance is reduced more than 12% compared to the average value, and that is reduced more than 23% compared to the maximum value.