• Title/Summary/Keyword: 최고선

Search Result 399, Processing Time 0.025 seconds

Analysis of vehicle central line invasion accidents using simulation (시뮬레이션을 이용한 차량의 중앙선 침범 사고 해석)

  • Han, Chang-Pyoung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.22 no.2
    • /
    • pp.507-513
    • /
    • 2021
  • This study examined the final stop position and posture of both vehicles, the damaged part of the vehicle, the road surface, the specifications of the vehicle, and the angle of impact, centering on the case of a collision in which no surface trace was found. As a result of the simulation, the impact velocity of an SM5 and Lexus was 131 km/h and 74 km/h, respectively, and the impact angle of the SM5 and Lexus was 0.91° and -161.07°, respectively. The cause of the accident was that the SM5 passed through the intersection exceeding the maximum speed limit of 61 km/h and entered the Lexus' left turn lane. Lexus collided during the evacuation to avoid the collision. The collision trajectory error rate of the simulation was approximately 1.4%. Of the subjective experience of accident investigators, the collision dynamics and vehicle engineering aspects and simulations were actively utilized to provide close-to-fact cause identification.

A Study on the Design Development of S.I.(Space Identity) for Culturre and Tourism Market Development: Based on Jecheon Central Market (문화관광형시장 육성을 위한 S.I.(Space identity)개발연구: 제천중앙시장을 중심으로)

  • Jin-Soo, Park
    • Journal of Industrial Convergence
    • /
    • v.20 no.11
    • /
    • pp.197-203
    • /
    • 2022
  • The purpose of this study is to establish an S.I. (Space Identity) considering the spatial location and cultural specificity of Jecheon Jungang Market, the oldest and largest market in Jecheon with historical characteristics. To this end, we identify the flow of the cultural tourism market, investigate and analyze the current state of Jecheon Central Market, and present a direction based on storytelling for each space. The concept of space design was divided into space, time, people, and culture as coexistence, and merchants, products, and shopping malls share temporality and coexist in one space. Therefore, the facilities for each floor consisted of a gate, information board, lighting, rest area, design bench facility, information center, business compliance line, floor sign, and gate floor sign for each floor. Through this, it is necessary to establish a mid- to long-term development strategy by establishing a step-by-step promotion strategy to predict the economic effect of creating new demand and increasing sales in Jecheon Central Market.

Multiple Target Management of Air-to-Air mode on Airborne AESA Radar (항공기 탑재 AESA 레이다의 공대공 모드 다표적 관리 기법)

  • Yong-min Kim;Ji-eun Roh
    • Journal of Advanced Navigation Technology
    • /
    • v.27 no.5
    • /
    • pp.580-586
    • /
    • 2023
  • AESA radar is able to instantaneously and adaptively position and control the beam, and this enables to greatly improve multi-target tracking capability with high accuracy in comparison to traditional mechanically-scanned radar system. This paper is primarily concerned with the development of an efficient methodology for multi-target managenent with the context of multi-target environment employing AESA radar. In this paper, targets are stratified into two principal categories: currently displayed targets and non-display targets, predicated upon their relative priority. Displayed targets are subsequently stratified into TOI (target of interest), HPT (high priority target), and SAT (situational awareness target), based on the requisite levels of tracking accuracy. It also suggests rules for determining target priority management, especially in air-to-air mode including interleaved mode. This proposed approach was tested and validated in a SIL (system integration lab) environment, applying it to AESA radars mounted on aircraft.

백동지역 변성염기성암과 그 주변암에서의 고생대 후기 변성작용과 그에 대한 지구조적 의미 해석

  • 오창환;전은영;최선규;송석환
    • Proceedings of the Mineralogical Society of Korea Conference
    • /
    • 2001.06a
    • /
    • pp.143-144
    • /
    • 2001
  • 경기육괴의 남서부에 해당하며 옥천구조대의 북쪽에 위치한 백동-홍성 일대의 충청남도 일원에는 선캠브리아기의 편마암복합체내에 초염기성암체들이 소규모 렌즈상의 암체로 이 지역에 우세한 구조선 방향인 북북동 방향으로 배열되어 산출된다. 이들 초염기성암채들이 조산대에 형성되는 알파인형이며 전형적인 상부 맨틀기원의 암석이 부분용융된 맨틀 잔여물로서 지표로의 이동과정에서 변성작용을 받아 대부분은 사문석화 혹은 활석화된 것으로 보고되어 있다. 본 연구의 주대상인 변성염기성암을 포함하는 백동지역의 초염기성암은 홍성도폭내 덕정리 편암암체 내에 주변 편마암체와 단층으로 접하면서 나타난다. 덕정리 편마암체는 주로 각섬석 화강편마암으로 구성되어있다. 백동지역의 초염기성암내에는 변성염기성암이 층상으로 협재되어 나타난다. 이들 변성염기성암은 석류석, 단사휘석, 각섬석, 사장석으로 주로 이루어진 석류석 각섬암이며 금홍석도 포함하고 있다. 많은 석류석 주변에는 사장석과 각섬석으로 이루어진 심플렉타이트가 발달되어있다. 석류석 각섬암내 심플렉타이트가 형성되지 않은 석류석 가장자리로부터 계산된 변성 온도-압력 조건은 590-72$0^{\circ}C$, 9-l0kb이며 심플렉타이트가 잘 형성된 석류석 주변부로부터는 490-$600^{\circ}C$, 4-6.3kb의 변성 온도-압력 조건이 계산되었다. 이에 반해 변성염기성암을 포함한 초염기성암체 주변에 나타나는 석류석-각섬석 화강편마암으로 부터는 570-78$0^{\circ}C$, 11.6-l6kb의 변성 온도-압력 조건을 얻었다. 석류석 각섬암에서 석류석내에 포획물로 나타나는 휘석(Xjd, 4-11)이 기질에 나타나는 휘석(Xid, 1-6)보다 높은 제이다이트 성분을 갖는다. 이는 석류석 중심부가 석류석 주변부보다 변성압력 조건이 높았을 가능성을 지시한다. 즉 연구지역의 석류석 각섬암은 주변의 각섬석 화강편마암과 같이 에콜로자이트상-상부각섬암상-고압백립암상의 점이대에 해당하는 변성작용을 받은후 초염기성암의 사문암화 작용시기에 1차 후퇴변성작용을 그리고 그후의 활석화 시기에 심플렉타이트를 형성하는 2차 후퇴변성작용을 받았다. 이러한 후퇴변성작용시기에 많은 유체가 침입하였고 그 결과 초염기성암내의 변성염기성암이 주변 화강편마암보다 후퇴변성작용을 강하게 받았을 것으로 예상된다. 변성염기성암의 변성연대를 구하기 위해 두 석류석 각석암 시료에 대해 석류석-전암 Sm-Nd 등시선 연령을 구하였다. 두 개의 석류석 각섬암으로부터 계산된 전암-석류석 연령은 297.9$\pm$5.7(2$\sigma$)Ma 그리고 268.7$\pm$3.3(2$\sigma$)Ma를 나타낸다. 석류석의 Sm-Nd 폐쇄온도가 700-75$0^{\circ}C$임을 고려할 때 두 석류석 각섬암으로부터 계산된 연대는 최고 변성작용 혹은 초기 냉각 시기를 지시할 가능성이 높다. 한편 전암의 두 동위원소 자료로부터 계산된 전암의 연령은 408Ma이다. 이러한 연구 결과는 연구지역의 석류석 각섬암이 시루리아기 후기 혹은 데본기 초기에 관입 후 석탄기 후기에서 페름기 중기에 주변 화강편마암과 함께 섭입작용을 받았을 가능성을 지시한다.

  • PDF

Evaluation of the antibodies against Pseudomonas tolaasii and Pseudomonas agarici for Immunoassays and Its Application (항 Pseudomonas tolaasii 및 Pseudomonas agarici 항체의 면역측정법을 위한 평가와 그 이용)

  • Jeon, Nak-Beom;Lee, Hyang-Burm;Shon, Dong-Hwa;Yu, Seung Hun
    • Research in Plant Disease
    • /
    • v.9 no.2
    • /
    • pp.94-98
    • /
    • 2003
  • To produce antibodies against Pseudomonas tolaasii and P. agarici, lyophilized P. tolaasii and P. agarici ($5{\times}10^7$ cfu/ml) and Freund, s adjuvant were immunized into rabbits 4 times. The specificity and sensitivity of the antibodies were evaluated by immunodiffusion test and indirect enzyme-linked immunosorbent assay (id ELISA). The ${\alpha}$-P. tolaasii antibody was very specific only against P. tolaasii, while ${\alpha}$-P. agarici antibody was not specific and showed a high cross reactivity toward P. tolaasii with detection limit concentration of $2{\times}10^3$ cfu/ml. However, the cross reactivities of ${\alpha}$-P. agarici antibody toward the related species including P. reactans were very low. Our results showed that ${\alpha}$-P. tolaasii and ${\alpha}$-P. agarici antibodies against P. tolaasii and P. agarici, respectively, might be useful for rapid and simple detection of the causal agents of bacterial brown and yellow blotches in cultivated oyster mushrooms.

A Study on a Multiresolution Filtering Algorithm based on a Physical Model of SPECT Lesion Detectability (SPECT 이상조직 검출능 모델에 근거한 다해상도 필터링 기법 연구)

  • Kim, Jeong-Hui;Kim, Gwang-Ik
    • Journal of Biomedical Engineering Research
    • /
    • v.19 no.6
    • /
    • pp.551-562
    • /
    • 1998
  • Amultiresolution filtering algorithm based on the physical SPECT lesion detachability provides and optimal solution for SPECT reconstruction problem. Related to the previous study, we estimated the SPECT lesion detection capability by m minimum detectable lesion sizes (MDLSs), and generated m reconstruction filters which are designed to maximize the smoothing effect at a fixed MDLS-dependent resolution level $\frac{MDLS}{4\sqrt{2In2}}$. The proposed multiresolution filtering algorithm used a coarse-to-fine approach for the m-level resolution filter images obtained from these m filters for a given projection image. First, the local homogeneity is determined for every pixel of the filter images, by comparing the local variance value computed in a window centered at the pixel and the mode determined from the distribution of the local variances. Based on the local homogeneity, the pixels declared as homogeneous are chosen from the filter image of the lowest resolution, and for the other pixels the same process is repeated for the higher resolution filter images. For the non-homogeneous pixels after this pixels after this repetition process ends, the pixel values of the highest resolution filter image are substituted. From the results of the simulated experiments, the proposed multiresolution filtering algorithm showed a strong smoothing effect in the homogeneous regions and a significant resolution improvement near the edge regions of the projection images, and so produced good adaptability effects in the reconstructed images.

  • PDF

Study on the Mating Ability and Competitiveness of the Radiation Irradiated Males of Rice Stem Borer (Chile suppressalis Walker) (방사선 조사 이화명나방의 교미능력 및 경쟁력에 관한 연구)

  • Hyun Jai Sun;Ryu Joon;Chung Kyu Hoi;Kwon Shin Han
    • Korean journal of applied entomology
    • /
    • v.11 no.1
    • /
    • pp.25-30
    • /
    • 1972
  • Five to seven day old pupae were irradiated with gamma rays, the mating ability, and competability of the irradiated males were examined. The results obtained are summarized as follows: 1. There is no difference in percentage of males that mated, nor in the maximum number of matings of the males, when individual matings were made, and fresh females were provided every day for his life time. 2. The average days for the first mating of the emerged were 1.5 days for the control, and 2.4 days for the males irradiated with 25 and 30 Krad. The average days between first and second mating were 3.0 days for the irradiated males, and 1.3 days for the control. 3. The average matings of a male were 1.2 and 2.5 times when 5 and 10 females were provided to a normal male respectively. No significant different in average numbers of mated female per male were observed between the normal and irradiated males. 4. To test the mating competitiveness of the irradiated and normal males (1:0, 1:1, 2:1, 1:2, 5:1, 1:5, 0:1) were confined together with five virgin females. The greatest reduction in hatching percentage was found with 5 : 1 : 1 (30 Krad) where $26.6\%$ was hatched.5, The results showed that the irradiated males were not fully competitive with normal males, but if the reduced number of eggs produced by the female mated with irradiated male is considered, it might be used sterile male techniques in rice stem borer control.

  • PDF

Analysis of Bioimpedance Change and the Characteristics of Blood Pressure according to Posture (자세에 따른 생체임피던스 변화와 혈압 특성 분석)

  • Cho, Young Chang;Kim, Min Soo
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.19 no.5
    • /
    • pp.25-31
    • /
    • 2014
  • Bioelectrical Impedance Analysis(BIA) is a widely used method for estimating body composition changes which is a non-invasive, inexpensive, safety and reproductive method. We studied the bioimpedance change and the distinction of blood pressure according to body posture and conducted three kinds of experiments: the real-time bioimpedance measurement, the simulation using equivalent circuit model and the blood pressure measurement. Bioimpedance is measured during 4 minutes at the multi-frequency(1 kHz, 10 kHz, 20 kHz, 50 kHz, 70 kHz, 100 kHz). From the experiment results, the changes in body postures result in changes of resistance and reactance, with an average rapid increase of body impedance when going from standing, sitting to supine. Specially, the laying resistance on average was 16.49% higher than supine resistance at 50 kHz and the laying reactance measurement was also 26.05% higher than sitting reactance at 1 kHz. Blood pressure in standing posture was higher than those in other postures both in maximum($125.14{\pm}12.30$) and in minimum($75.57{\pm}10.31$). The results of BIA and blood pressure in this study will be contributed to the research on acute illness, extreme fat, and body shape abnormalities.

Nondestructive Inspection of Steel Structures Using Phased Array Ultrasonic Technique (위상배열 초음파기법을 이용한 강구조물의 비파괴 탐상)

  • Shin, Hyeon-Jae;Song, Sung-Jin;Jang, You-Hyun
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.20 no.6
    • /
    • pp.538-544
    • /
    • 2000
  • A phased array ultrasonic nondestructive inspection system is being developed to obtain images of the interior of steel structures by modifying a medical ultrasound imaging system. The medical system consists of 64 individual transceiver channels that can drive 128 array elements. Several modifications of the system were required mainly due to the change of sound speed. It was necessary to fabricate array transducers for steel structure and to obtain A-scan signal that is necessary for the nondestructive testing. Boundary diffraction wave model was used for the prediction of radiation beam field from array transducers, which provided guidelines to design array transducers. And a RF data acquisition board was fabricated for the A-scan signal acquisition along a selected un line within an image. For the proper beam forming in the transmission and reception for steel structure, delay time was controlled. To demonstrate the performance of the developed system and fabricated transducers, images of artificial specimens and A-scan signals for selected scan lines were obtained in a real time fashion.

  • PDF

3D Film Image Classification Based on Optimized Range of Histogram (히스토그램의 최적폭에 기반한 3차원 필름 영상의 분류)

  • Lee, Jae-Eun;Kim, Young-Bong;Kim, Jong-Nam
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.22 no.2
    • /
    • pp.71-78
    • /
    • 2021
  • In order to classify a target image in a cluster of images, the difference in brightness between the object and the background is mainly concerned, which is not easy to classify if the shape of the object is blurred and the sharpness is low. However, there are a few studies attempted to solve these problems, and there is still the problem of not properly distinguishing between wrong pattern and right pattern images when applied to actual data analysis. In this paper, we propose an algorithm that classifies 3D films into sharp and blurry using the width of the pixel values histogram. This algorithm determines the width of the right and wrong images based on the width of the pixel distributions. The larger the width histogram, the sharp the image, while the shorter the width histogram the blurry the image. Experiments show that the proposed algorithm reflects that the characteristics of these histograms allows classification of all wrong images and right images. To determine the reliability and validity of the proposed algorithm, we compare the results with the other obtained from preprocessed 3D films. We then trained the 3D films using few-shot learning algorithm for accurate classification. The experiments verify that the proposed algorithm can perform higher without complicated computations.