• Journal of the Korean Wood Science and Technology
• /
• v.39 no.3
• /
• pp.269-280
• /
• 2011

Today, global warming is one of main problems all over the world. The cause of the global warming is carbon dioxide outbreak by the rapidly increasing energy use. Therefore, it is necessary to save energy in each industrious field. It was investigated that the half of total energy consumption over the world was used for construction and building. Therefore, the saving of the building energy plays a significant role in decreasing total energy consumption. With the considerable increase in building energy consumption, a green building rating system and certification are required to reduce building energy consumption and $CO_2$ emissions. Of various elements reducing building energy, the thermal conductivity of materials affects the energy consumption as a basic element, which is directly related with reducing energy consumption. In particular, as the thermal conductivity of finishing materials is an important factor to decide heating energy efficiency of floor heating system, the investigation and development are necessary.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.199-204
• /
• 2017

In this study, we present a home appliance load identification algorithm. The algorithm utilizes complex sensory data in order to improve the existing NIALM using total power usage information. We define the influence graph between the appliance status and the measured sensor data. The device identification prediction result is calculated as the weighted sum of the predicted value of the sensor data processing algorithm and the predicted value based on the total power usage. We evaluate proposed algorithm to compare appliance identification accuracy with the existing NIALM algorithm.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2099-2100
• /
• 2011

본 논문은 ${\circ}{\circ}$댐에서 원수를 공급받는 ${\circ}{\circ}$정수장(이하 정수장) 유입관로의 잉여압력을 이용하여 소수력 발전기를 설치하고, 정수장 여유부지에 태양광발전설비를 계획하여 총163.4kW(Peak 사용전력 128.16kW)의 시설용량으로 연간전력사용량(451 MWh) 대비 110% 정도의 발전생산(약500MWh)이 가능한 에너지자립형 개념의 정수장을 설계한 사례이다.

• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.884-894
• /
• 2013

In this paper, we investigate the characteristics of power amplifiers and simplified memoryless non-linear power amplifier models for energy efficient communication system. First, we present the transfer function of GaAs FET (Gallium Arsenide Field Effect Transistor) that is widely used for high power amplifier. From those investigations, we introduce the instantaneous efficiencies and methods of amplification by assuming that the saturated current is constant, while perfect linearity is exploited under knee voltage. Then, we discuss four non-linear power amplifier models in a baseband signal processing. Finally, we explain the specified total power consumption model in a base station to achieve the resonable analysis for energy efficient communication.

• Environmental and Resource Economics Review
• /
• v.28 no.3
• /
• pp.385-413
• /
• 2019

This study examines the determinants of net export of electricity among 30 European countries sharing electricity grid during the period of 1990~2014 by separating the sample period before and after 2005 in which ETS was introduced in Europe. The empirical method used in this study is generalize least squared one considering both heterogeneous and serial correlation in the balanced panel data. According to the empirical results, after 2005 introducing the ETS, holing energy resources, concentrating only on few electricity generation resources, and nuclear electricity generation had played more important role in net export of electricity, while renewable energy had negative effect on net export of electricity and coal and gas generation have no effect on net export after introduction of ETS in Europe probably because of high environmental cost. The policy implication of the results would be that reconsidering each country's optimal generation mix strategy and its role in case freely trading electricity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.378-384
• /
• 2019

In the food wastewater treatment facilities, the water quality improvement effect and the greenhouse gas emission amount followed by the change in electricity usage through a change of the aeration tank ventilation system were evaluated. also, the amount of greenhouse gas emission followed by the change in electricity usage through the change of the sludge dewatering, storage, transporting method was also evaluated. The total GHG emission from food wastewater treatment facility improvement were divided into direct emissions from the treatment processes and indirect ones from electricity usage. The water quality improvement effect of wastewater treatment plant was found to be 63.3% for BOD removal rate, 42.0% for COD removal rate, 71.0% for SS removal rate and 39.6% for T-N removal rate. and according to the results of calculating output by applying both direct emissions of greenhouse gas (Scope 1) and the indirect emission (Scope 2) of greenhouse gas followed by changes in power consumption. It was estimated that there was a total of 276.0tCO2eq./yr(7.5%) greenhouse gas reduction effect from 3,668.8tCO2eq./yr before improvement to 3,392.8tCO2eq./yr after improvement. In this result is not due to the effects of water quality improvement of emission source, but because the reduction in electricity use has reduced the amount of greenhouse gas emissions.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.34-41
• /
• 2019

It is essential to introduce EERS (Energy Efficiency Resource Standards) according to the trend of the era in which energy saving is emphasized, and it is time to settle down in a stable manner. Electric motors and lighting devices, which account for more than 60% of the nation's electricity use, are the most effective items of the EERS. And accurate methods of calculating savings must be preceded. In this study, the operation rate and load rate are measured through the demonstration of energy use at 400 businesses and the measured rates are used for EERS savings calculation. The results imply that the proposed method can be successfully applied to calculate cost-effective and reliable energy savings.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.49-59
• /
• 2018

Smart grid system has been deployed fast despite of legal, business and technology problems in many countries. One important problem in deploying the smart grid system is to protect private smart meter readings from the unbelievable parties while the major smart meter functions are untouched. Privacy-preserving involves some challenges such as hardware limitations, secure cryptographic schemes and secure signal processing. In this paper, we focused particularly on the smart meter reading aggregation,which is the major research field in the smart meter privacy-preserving. We suggest a noisy weighted aggregation scheme to guarantee differential privacy. The noisy weighted values are generated in such a way that their product is one and are used for making the veiled measurements. In case that a Diffie-Hellman generator is applied to obtain the noisy weighted values, the noisy values are transformed in such a way that their sum is zero. The advantage of Diffie and Hellman group is usually to use 512 bits. Thus, compared to Paillier cryptosystem series which relies on very large key sizes, a significant performance can be obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5321-5329
• /
• 2011

Space Layout has been an issue in the facet of reducing the co2 in that the transportation sector has been to represent almost more than 20% of the total energy consumption for decades. Beside the development of the more efficient transportation systems, an efficient space layout makes it possible to reduce the amount of energy consumption in the transportation sector through allocating the sub-spaces in such an arrangement of minimizing the travel distances. In line with this thinking, this research aims at implementing a simulator which can calculate the vehicle-based travel distance upon a certain space layout. Based on the findings that the vehicle-based travels take place between the two functionally related sub-spaces, this research addresses a method of calculating the vehicle-based travel distance by multiplying the traffic volume of each sub-spaces by the travel distance to the other connected sub-spaces.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.119-125
• /
• 2014

This study evaluated the environmental impacts of a soil washing (SW) process, especially, we compared the on-site and off-site remediation of TPH-contaminated soil using green and sustainable remediation (GSR) tool. To assess relative contribution of each stage on environmental footprints in the entire soil washing process, we classified the process into four major stages: site foundation (stage I), excavation (stage II), separation & washing (stage III), and wastewater treatment (stage IV). In on-site SW process, the relative contribution of $CO_2$ emissions and energy consumption were 87.1% and 80.4%, respectively in stage I, and in off-site SW process, the relative contribution of $CO_2$ emissions and energy consumption were 82.7% and 80.5%, respectively in stage II. In conclusion, the major factor contributing environmental impact in the SW process were consumable materials including steel and stainless steel for washing equipment in on-site treatment and fuel consumption for transportation of soil in off-site treatment.