• Journal of Aerospace System Engineering
• /
• v.11 no.1
• /
• pp.8-13
• /
• 2017

This study was performed to evaluate the turbine performance of a turbopump in the third stage engine of the Korea Space Launch Vehicle-II. The turbine is a supersonic impulse type with a single rotor. One nozzle is for starting and four remaining nozzles are for steady operation. A similarity test was carried out in the high air test facilities at the Korea Aerospace Research Institute. Test results showed that turbine efficiency changed much more from rotational speed variations than by pressure ratio variations. These results showed characteristics similar to other supersonic impulse turbines.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.563-564
• /
• 2010

A Numerical analysis of preventing pressure oscillation for the supersonic inlet of IRR at the boosting mode was conducted in this study. To reduce the fluctuation of pressure, the supersonic inlet was equipped with annular slit. By decreasing the entrained air mass, the amplitude of fluctuation and maximum pressure at the inlet were decreased while the frequency was increased. In case, the optimal trade-off value is obtained between frequency and amplitude, it is expected that the pressure oscillation declining method using the slit will be helpful in various boosting and transition mode problem for IRR.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.173-179
• /
• 2012

Steady and unsteady three-dimensional RANS simulations have been performed on partial admission supersonic axial turbine having backward/forward sweep angles(${\pm}15^{\circ}$) and the results are compared with each other. The objective of this paper is to study the effect of unsteadiness on turbine flow characteristics and performances. The all results indicated that the losses of unsteady simulations were greater than those of steady cases. It was also shown that BSW model give the effect on the reducing of mass flow rates of tip leakage. In unsteady simulation, the increase of t-to-s efficiency at Rotor Out plane was observed more clearly.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.970-972
• /
• 2011

The vacuum chamber pressure was investigated according to the second throat exhaust diffuser entrance diameter. The sizes of diffuser entrance were changed three cases, and each case was computed by using CFD. Also in order to relatively compare the vacuum chamber pressure the Euler equation was adopted. According to the results, as the size of diffuser entrance was increased it was observed that the vacuum chamber pressure was decreased.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.155-160
• /
• 2004

This paper describes a supersonic separation of air-launching rocket from the mother plane. Three dimensional Euler equations were numerically solved to analyze steady/unsteady state fluid flows. To solve the Euler equations, named CFD-FASTRAN that is commercial computation code. The results of simulation clearly demonstrate effect of shock-expansion wave interaction between the rocket and the mother plane. Moreover, important influential factors at separating stage of the rocket were extracted with a comprehensive analysis. Finally, from the consideration of supersonic-separation, a guideline to safety-separation is given to the design of supersonic air-launching rocket.

• Journal of the Korean Society of Systems Engineering
• /
• v.1 no.1
• /
• pp.67-72
• /
• 2005

Design and optimization study has been performed to obtain a supersonic air.launching mission for the nanosat launcher. Given mission is to launch 10kg payload to target orbit of $700km{\times}700km$. Additional design constraints are imposed by the mother plane. After the required velocity is obtained, the stag ing optimization is carried out. Serial analyses for the propulsion system and aerodynamics are performed then, the rocket trajectory optimization has been carried out. After several mission design and optimization iterations, the optimized mission which satisfies the mission target is obtained. Total weight of the three-staged air-launching rocket is 1231.4kg and the payload weight is 10 kg.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.11a
• /
• pp.4-4
• /
• 1997

로켓 조종장치는 크게 추력방향 조종(TVC, Thrust Vector Control) 장치, 측면추력조종(Lateral Thrust Control) 장치 그리고 공기역학 조종면으로 분류할 수 있다. 조종장치의 공통된 특징은 모터가 작동하거나 유도탄이 비행할 때만 타의 효과가 발생한다는 점이다. 그러므로 조종장치를 개발하기 위해서는 이상류 초음속 유동이나 삼음속 이상의 자유유동(freestream)을 지상에서 효과적으로 모의할 수 있는 지상 시험장치가 필요하다. 이 시험장치에는 초음속 풍동과 유동 시험장치(cold-flow test stand), 그리고 6분력 트러스트 스텐드가 포함된다. 삼성항공은 우주용 추진기관의 성능을 지상에서 간단한 장치를 구현하여 시험할 수 있는 모의연소 시험장치, 노즐유동에 포함된 고체입자를 직접 수집할 수 있는 고체입자 포집장치 등 각종 시험장치를 제작하였다. 이를 바탕으로 차세대 전술유도탄의 핵심기술가운데 하나인 조종장치와 이를 효과적으로 개발하기 위한 지상 시험장치 확보에 착수하고 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.18-18
• /
• 1998

평판에 충돌하는 초음속 세트에 관한 연구는 수직/단거리 이·착륙기의 발진, 미사일 발사시스템, 다단계 로켓 분리 등 실제적인 분야에 응용되고 있으며 고온의 충돌제트와 화염에 의한 가열문제와 관련된 산입분야에서도 많은 연구가 이루어지고 있다. 과소팽창하는 초음속 제트가 평판에 충돌할 때 Barrel shock, exhaust gas boundary, Mach disk, contact surface, reflected shock, plate shock, stagnation bubble 등 매우 복잡한 유동 구조가 표면에 나타나는데 이것은 평판으로부터 반사된 shock과 free jet의 충격파 구조 사이에서의 상호간섭 때문이다. 노즐로부터 방출되는 고속, 고온가스가 주변 장비 등에 부딪힐 때 발생하는 이러한 복잡한 간섭현상의 연구는 관련 주변장비 설계 및 상황예측에 필수적인 자료를 제공하며 이해를 도와준다.

• Journal of computational fluids engineering
• /
• v.6 no.2
• /
• pp.32-39
• /
• 2001

Hypersonic analysis on the KSR-Ⅲ payload configuration has been performed using an axisymmetric Navier-Stokes code. A numerical code based on the Harten and Yee's upwind TVD scheme with simplified curve fits in the chemically reacting equilibrium air was developed. The carbuncle phenomenon on detached shock in front of the payload is controlled by using pressure gradients to tune the dissipation. Chemically reacting equilibrium computations for the reentry flight conditions of Mach No. 10.2, 8, 4.9 are presented and compared with the results of calorically perfect gas.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.38-44
• /
• 2011

The performance experiment was tested for the velocity compound turbine of turbopump which was the main part of 75 ton class liquid rocket engine. The seal is installed between the 1st rotor and the reversing vane to reduce the leakage flow. The turbine outlet pressure of the velocity compound turbine by changing the rotating speed was compared with that of baseline turbine with single rotor including the effect on the total performance.