• Journal of Korean Association for Spatial Structures
• /
• v.7 no.3 s.25
• /
• pp.153-165
• /
• 2007

Flexible structure uses a material with strong axial stiffness and small bending stiffness as its major structural material so it is very sensitive to initial stiffness. Therefore, the self-formation process which accomplishes a form in the natural world is grasped and it is as well investigated and classified the type of modeling techniques which are available to find the shapes of soft structures. Accordingly, for analysis and design of flexible structure, three-step analysis such as shape analysis, stress-deformation analysis, cutting pattern generation and constructional analysis is required unlike the existing stiff structure. In this study, suggest that minimize the error of side curvatures by the triangle Re-mesh pattern and draw the cutting pattern generation.

• Journal of the KSME
• /
• v.32 no.1
• /
• pp.4-17
• /
• 1992

이 글에서는 복합적층판의 역학적 특성인 층간분리, 모재균열, 초기파손 후의 거동에 대한 문헌을 간단히 서술하고 그 특성을 살펴 보았다. 이상에서 살펴본 바와 같이 이방성인 층으로 구성된 복합적층 구조의 역학적 특성은 균질인 단일구조와 달리 각층의 재료상수가 달라층과 층 사이의 층간응력이 존재하여 층간분리현상이 발생하지 않도록 섬유방향뿐만 아니라 적층순서를 중요한 설계변수로 고려하여야 한다. 또한 모재균열로 인한 기계적 거동의 변화를 이해하고 초기파손 후의 손상을 고려한 해석을 수행하여 복합적층 구조의 응력해석 및 파손, 강도예측을 한다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.117-126
• /
• 1990

In the early stage of ship design process large number of alternative compartment layout designs are generated and examined iteratively. Therefore, the design efficiency will be considerably enhanced if a tool is available to perform this kind of iterative design process effectively in a relatively short time. This paper describes a method for generating and evaluating various alternative compartment layout designs in a personal computer. In this method, computer model of a compartment layout is generated by establishing the hierarchical structure of the entities forming a compartment and defining clearly the relationships among the entities. The evaluation of the design alternatives are effectively performed utilizing the computer model generated. The data structure for storing the defined compartment layout is explained and an illustrative example is given showing the application of the method to the design and evaluation of compartment layout of an Oceanographic Research Vessel.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3B
• /
• pp.315-324
• /
• 2010

We developed a design chart for very large floating structures through intensive hydroelastic analysis. Using this chart, one can predict the hydroelastic response of very large floating structures preliminarily at design stage without the cost-demanding hydroelastic analysis. This paper presents two new design charts based on the theory of VLFS. The purpose of the first design chart is to determine RAOs of the maximum longitudinal stress of VLFS considering properties of waves and structures. The design chart I can be applied to any sizes of VLFS in same aspect ratios and dimensionless stiffness parameters. The second design chart is developed to take into account the actual wave condition by using the Bretschneider spectrum with Beaufort sea state.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.697-702
• /
• 1996

원전 배관계통에 LBB를 적용하면 배관파단으로 인한 동적영향(dynamic effect)을 고려하지 않아도 되므로 각종 구조물의 설계가 단순해지고, 배관파단에 대비해 설치하였던 각종 지지구조물들을 제거할 수 있으므로 설계비용 절감 등 경제적 이점을 얻을 수 있다. 본 논문의 목적은 차세대원전 안전주입 및 정지냉각계통 배관에 대해 설계초기단계에서 LBB적용 여부를 판단할 수 있는 배관평가선도를 개발하는 것이다. 이를 위해 먼저 배관재료의 응력-변형률곡선을 사용하여 감지가능한 균열길이를 산출하였으며, 3차원 유한요소해석과 배관재료의 파괴저항곡선을 이용한 균열안정성평가를 수행하여 배관평가선도를 개발하였다. 본 연구에서 개발한 배관평가선도를 배관설계초기단계에 사용하면 LBB적용여부로 인한 설계변경과정이 불필요하므로 전체공기를 단축할 수 있으며, 특정한 배관계통이 아닌 일반 배관계통에 적용할 수 있으므로 LBB해석회수를 상당히 줄일 수 있다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.4
• /
• pp.453-462
• /
• 2007

The purpose of this study is to predict the ratios of increase in lateral stiffness for preliminary structural design of tall buildings. For this, the basic models of tall buildings with 60 stories are generated. The basic models have typical floor plan of Box or T type. And the factors for increase in lateral stiffness are selected as follows; the addition of outriggers, increase in material strength, and increase in member size of core walls, outrigger columns, and outrigger walls. Then these factors are applied to the basic models and their effects are investigated using the results of structural analysis. Finally, based on the investigation, the ratios of increase in lateral stiffness for preliminary structural design of tall buildings are proposed and applied to examples of tall building for verification of the ratios.

• Composites Research
• /
• v.34 no.5
• /
• pp.283-289
• /
• 2021

This paper derives numerically the buckling Knockdown factors using two different initial imperfection models, such as geometric and loading imperfection models, to investigate the unstiffened composite cylinder with an ellipse pre-buckling deformation pattern. Single Perturbation Load Approach (SPLA) is applied to represent the geometric initial imperfection of a thin-walled composite cylinder; while Single Boundary Perturbation Approach (SBPA) is used to represent the geometric and loading imperfections simultaneously. The buckling Knockdown factor derived using SPLA is higher than NASA's buckling design criteria by approximately 84%, and lower than buckling test result by 9%. The buckling Knockdown factor using SBPA is higher than NASA's buckling design criteria by about 75%, and 14% lower than the buckling test result. Therefore, it is shown that the buckling Knockdown factors derived in this study can provide a lightweight design compared to the previous buckling design criteria while they give reasonably a conservative design compared to the buckling test for both the initial imperfection models.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.6
• /
• pp.543-553
• /
• 2008

Shipbuilding is a kind of ETO(Engineering To Order) industry which designs and produces a product in accordance to various requirement of customers, rules and regulations. Recently, the number of ordered ships has been increased by up to two or three times in each domestic shipyards. Most shipyards have been adopted 3D ship CAD, ERP(Enterprise Resource Planning) and APS(Advanced Planning System) to get an efficient product development and manufacturing system. However, not only the effective operation of 3D ship CAD, ERP and APS but also the production efficiency can be achieved only if product information management which can manages the product data is implemented in an integrated environment. Present study has suggested a systematic approach to implement a PLM system to manage the product data in early design shipbuilding. Also, a prototype of PLM is implemented to manage the product data in a basic ship-design. In the prototype system, a product structure and architecture of PLM is considered.

• Computational Structural Engineering
• /
• v.7 no.1
• /
• pp.91-98
• /
• 1994

Design sensitivity analysis method for the vibration of vehicle structure is developed using adjoint variable method. A variational approach with complex response method is used to derive sensitivity expression. To evaluate sensitivity, FEM analysis of ship deck and vehicle structure are performed using MSC/NASTRAN installed in the super computer CRAY2S, and sensitivity computation is performed by PC. The accuracy of sensitivity is verified by the results of finite difference method. When compared to structural analysis time on CRAY2S, sensitivity computation is remarkably economical. The sensitivity of vehicle frame can be used to reduce the vibration responses such as displacement and acceleration of vehicle.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.2
• /
• pp.131-142
• /
• 2015

In this paper, we present an optimization of truss structures subjected to stress, buckling, and natural frequency constraints. The main objective of the present study is to propose an efficient HA-SA algorithm for solving the truss optimization subject to multiple constraints. The procedure of hybrid HA-SA is a search method which a design values in harmony memory of harmony search are used as an initial value designs in simulated annealing search method. The efficient optimization of HA-SA is illustrated through several optimization examples. The examples of truss structures are used 10-Bar truss, 52-Bar truss (Dome), and 72-Bar truss for natural frequency constraints, and used 18-Bar truss and 47-Bar (Tower) truss for stress and buckling constraints. The optimum results are compared to those of different techniques. The numerical results are demonstrated the advantages of the HA-SA algorithm in truss optimization with multiple constraints.