• Title/Summary/Keyword: 초기함수 조건

Search Result 278, Processing Time 0.035 seconds

Performance Analysis of Fast Start-Up Equalization Using Binary Codes with specific Autocorrelation Functions (특정 자기 상관 함수를 갖는 이진 부호를 이용한 빠른 수렴 속도를 이루는 등화방법의 성능 분석)

  • 양상현;한영열
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.10 no.7
    • /
    • pp.1085-1094
    • /
    • 1999
  • In the global system for the mobile communication (GSM) system, the class of training sequences used in a TDMA frame is a preamble sequence with a period of 16 bits for the channel impulse response measurement and the start up equalization during the training period. If the transmitted preamble sequence and the binary sequence in the receiver properly satisfy a condition, this training sequences used for fastly adjusting the tap coefficients and impulse response can be measured by calculating the crosscorrelation function. In this paper, it is used that training sequences have zero values of the autocorrelation at all delays except zero and middle shifts. A comparison of convergence rate, a mathematical approach for fast start-up equalization and correctly channel impulse response measurement are proposed.

  • PDF

Improving streamflow predictability in a land surface model (지표수문모형의 하천유출 모의성능 개선)

  • Hyun Il Choi;Yung Kwon Kim
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.345-345
    • /
    • 2023
  • 기후변화에 대응하기 위한 가뭄과 홍수 등의 수재해 관리체계 수립의 필요성이 높아지고 있어, 기후예측모형과 연계하여 수문 및 에너지 순환과정에서 하천유출에 대한 기후변화 영향예측이 가능한 지표수문모형(Land Surface Model, LSM)의 개발과 적용이 요구되고 있다. 또한, LSM은 연속적이고 장기적인 유출을 모의할 수 있어 수재해에 관한 예측과 정보 제공에 유용하므로, 최근 수재해 예측시스템 구축을 위한 주요한 도구로 관심을 받고 있다. 이에 따라, 본 연구에서는 기후모형 CWRF(Climate-Weather Research and Forecasting Model)와 연계되어 물-에너지 순환모의가 가능한 최신 LSM 중 하나인 Common Land Model(CoLM)을 우리나라 유역의 장기하천유출모의에 적용하고자 한다. 대부분의 LSM은 지상의 물과 에너지 순환과정이 각 단일 격자의 수직적인 모의과정으로 제한되고 있었지만, 현재 지속적인 개선을 통해 많은 LSM에서 보다 현실적인 물과 에너지 변화를 모의하고자 노력하고 있다. 그러나, 지속적인 모형의 개선에도 불구하고(또는 그로 인해) 정교한 수학적 프로세스를 통합하여 개선된 최신 LSM은 오히려 복잡한 매개변수 체계, 매개변수 추정, 입력자료, 초기 및 경계조건 등에서 비롯된 불확실성이 존재하고 있다. 따라서, 모형의 주요 매개변수값의 추정은 모의결과의 성능과 안정성을 확보하기 위한 LSM의 모의에서 필수적인 과정 중 하나이다. 유역의 특성에 따라 결정되는 모형 매개변수는 관련자료의 부재 또는 관측의 부정확성으로 인해 검보정 과정을 통해 결정되어야 하므로, 유역의 수문특성을 최대한 반영하고 모형의 성능과 안정성을 확보하기 위해 모의목적에 따라 적절한 검보정 목적함수의 선정도 요구된다. CoLM과 같이 다양한 매개변수가 사용되는 LSM에서는 모의결과에 대한 불확실성을 줄이고, 모의목적에 따른 모형의 예측도 향상을 위해서 모의결과에 민감한 주요 매개변수의 검보정이 과정이 중요하다. 따라서, 본 연구에서는 격자기반 지표수문모형인 CoLM을 이용하여 우리나라 유역의 장기하천유출을 모의하는 과정에서 CoLM의 주요 매개변수 검보정에 필요한 적절한 목적함수의 적용을 통해 CoLM 장기하천유출 모의결과의 예측성능을 개선하고자 한다.

  • PDF

Shear Load-Transfer Function of Rock-Socketed Drilled Shafts Considering Borehole Roughness (굴착면 거칠기를 고려한 암반 근입 현장타설말뚝의 주면 하중전이함수 제안)

  • Seol, Hoon-Il;Woo, Sang-Yoon;Han, Keun-Taek;Jeong, Sang-Seom
    • Journal of the Korean Geotechnical Society
    • /
    • v.22 no.7
    • /
    • pp.23-35
    • /
    • 2006
  • Shear load transfer characteristics of rock-socketed drilled shafts were analyzed. The constant normal stiffness (CNS) direct shear tests were performed to identify the major influencing factors of shaft resistance, i.e., unconfined compressive strength, borehole roughness, normal stiffness, initial confining stress, and material properties. Based on the CNS tests, shear load transfer function of drilled shafts in rocks is proposed using borehole roughness and the geological strength index (GSI), which indicates discontinuity and surface condition of rock mass in Hoek-Brown criterion (1997). The proposed load-transfer function was verified by the load test results of seven rock-socketed drilled test shafts subjected to axial loads. Through comparisons of the results of load tests, it is found that the load-transfer function by the present study is in good agreement with the general trend observed by in situ measurements, and thus represents a significant improvement in the prediction of load transfer of drilled shafts.

Histogram Analysis in Separated Region for Face Contour Extraction under Various Environmental Condition (다양한 환경 조건에서의 얼굴 윤곽선 영역 검출을 위한 분할 영역 히스토그램 분석)

  • Do, Jun-Hyeong;Kim, Keun-Ho;Kim, Jong-Yeol
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.47 no.1
    • /
    • pp.1-8
    • /
    • 2010
  • Some methods employing the Active Contour Model have been widely used to extract face contour. Their performance, however, depends on the initial position of the model and the coefficients of the energy function which should be reconsidered whenever illumination and environmental condition of an input image is changed. Additionally, the number of points in the contour model should increase drastically in order to extract a fine contour. In this paper, we thus propose a novel approach which extracts face contour by segmenting the face region with threshold values obtained by a histogram analysis technique in the separated region of input image. The proposed method shows good performance under various illumination and environmental condition since it extracts face contour by considering the characteristics of the input image.

Study on Press-drying of Sapwood and Heartwood of Oak (상수리나무 변재(邊材)와 심재(心材)의 열판건조(熱板乾燥)에 관(關)한 연구(硏究))

  • Jung, Hee Suk;Lee, Phil Woo
    • Journal of Korean Society of Forest Science
    • /
    • v.36 no.1
    • /
    • pp.26-32
    • /
    • 1977
  • Press drying was used on sapwood and heartwood of oak (Qercus acutissima Carruthers) to find profitable means of drying low grade logs. This study was designed to investigate the process of press drying considering core temperature, current moisture content, drying rate, drying time, final moisture content, dimensional change and drying defects. The drying tests were conducted using 1.5 centimeter thick material at platen temperature of $175^{\circ}C$ and pressure of 35psi. The results were summarized as fallows. 1. Core temperature was divided into three stages of drying characterized by initial heating period, plateau temperature, and period of rising core temperature. Plateau temperature of heartwood material was higher and longer than that of sapwood material. 2. The predicting equation for change in drying rate of sapwood material was log y=-2.7925-0.0811x as function of time. That of heartwood material was log y=-3.3382-0.0468x. 3. Sapwood material reduced the moisture content from 59 to 2.5 percent in 45minutes. Heartwood material reduced the moisture content from 64 to 3.3 percent in 55 minutes. 4. Shrinkage during press drying were 20.4 percent in thickness direction and 2.5 percent in width direction. Recovery on equilibrium conditioning at 65 percent relative humidity and temperature of $20^{\circ}C$. were 11.4 percent in thickness direction and 49.4 percent in width direction. 5. Heartwood material developed severe honeycombing and moderate checking. The sapwood material dried without honeycombing, checking and collapse. All material kept wood flat.

  • PDF

A Hydraulic Conductivity Model Considering the Infiltration Characteristics Near Saturation in Unsaturated Slopes (불포화 사면의 포화 부근 침투 특성을 고려한 수리전도도 모델)

  • Oh, Se-Boong;Park, Ki-Hun;Kim, Jun-Woo
    • Journal of the Korean Geotechnical Society
    • /
    • v.30 no.1
    • /
    • pp.37-47
    • /
    • 2014
  • Unsaturated hydraulic conductivity (HC) is integrated theoretically from soil water retention curves (SWRC) by Mualem capillary model, but the prediction of HC is extremely sensitive to small variation of matric suction near saturation. Near saturation, the Mualem HC based on smooth SWRC decreases abruptly and has problems in the reliability of hydraulic behavior and the stability of numerical solutions. To improve van Genuchten-Mualem (VGM) HC, the van Genuchten SWRC model is modified within range of low matric suction (arbitrary air entry pressure). At an arbitrary air entry pressure, the VG SWRC is linearized in log scale until full saturation. The modified VG SWRC does not affect the fit of actual retention behavior and either the parameters of original VG SWRC fit. Using the modified VG SWRC, the VGM HC is modified to integrate for each interval decomposed by arbitrary air entry pressure. An analytical solution on modified VGM HC is proposed each interval, to protect the rapid change in HC near saturation. For silty soils, VGM models of HC function underestimate the unsaturated permeability characteristics and especially show rapid reduction near saturation. The modified VGM model predicts more accurate HC functions for Korean weathered soils. Furthermore, near saturation, the saturated HC is conserved by the modified VGM model. After 2-D infiltration analysis of an actual slope, the hydraulic behaviors are compared for VGM and the modified models. The prediction by the proposed model conserved the convergence of solutions on various rainfall conditions. However, the solution by VGM model did not converge since the conductivity near saturation reduced abruptly for heavy rainfall condition. Using VGM model, the factor of safety is overestimated in both initial and final stage during heavy rainfall. Stability analysis based on infiltration analysis could simulate the actual slope failure by the proposed model on HC.

Estimating the Longitudinal Change in Academic Achievements of Multicultural Adolescents by Piecewise Growth Modeling (분할함수 성장모형을 활용한 다문화 청소년의 학업성취 변화 추정 및 예측요인 탐색)

  • Yeon, Eun Mo;Choi, Hyo-Sik
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.7
    • /
    • pp.370-379
    • /
    • 2020
  • The purpose of this study is to estimate the longitudinal changes in the academic achievement of Korean adolescents who transition from elementary to middle school and examine the individual and social factors of the changes using piecewise growth modeling. For this study, the Multicultural Adolescents Panel Study (MAPS) data from 1st to 6th waves (4th-9th grade) were used. The results are as follows. First, the results showed that the piecewise growth function was the most appropriate method to explain changes in the academic achievement of Korean adolescents with respect to the time of vacation. Second, adolescents' academic achievement declined constantly and was greater for middle school students. Third, parental efficacy, self-esteem, and support from friends had a significant positive effect, while uninvolved parenting and acculturation stress had a significant negative effect on the initial value of academic achievement. Self-esteem and support from friends in the 4th grade prohibit its decline in the first change rate of academic achievements. Meanwhile, acculturation stress for 4th-grade students accelerates the decline of academic achievement.

Optimization of Tank Model Parameters Using Multi-Objective Genetic Algorithm (I): Methodology and Model Formulation (다목적 유전자알고리즘을 이용한 Tank 모형 매개변수 최적화(I): 방법론과 모형구축)

  • Kim, Tae-Soon;Jung, Il-Won;Koo, Bo-Young;Bae, Deg-Hyo
    • Journal of Korea Water Resources Association
    • /
    • v.40 no.9
    • /
    • pp.677-685
    • /
    • 2007
  • The objective of this study is to evaluate the applicability of multi-objective genetic algorithm(MOGA) in order to calibrate the parameters of conceptual rainfall-runoff model, Tank model. NSGA-II, one of the most imitating MOGA implementations, is combined with Tank model and four multi-objective functions such as to minimize volume error, root mean square error (RMSE), high flow RMSE, and low flow RMSE are used. When NSGA-II is employed with more than three multi-objective functions, a number of Pareto-optimal solutions usually becomes too large. Therefore, selecting several preferred Pareto-optimal solutions is essential for stakeholder, and preference-ordering approach is used in this study for the sake of getting the best preferred Pareto-optimal solutions. Sensitivity analysis is performed to examine the effect of initial genetic parameters, which are generation number and Population size, to the performance of NSGA-II for searching the proper paramters for Tank model, and the result suggests that the generation number is 900 and the population size is 1000 for this study.

Field Cooling Tests of Paddy Stored in Steel Bins with a Grain Cooler (곡물냉각기를 이용한 철제 원형빈에서 벼 냉각)

  • 김의웅;김동철
    • Food Science and Preservation
    • /
    • v.11 no.2
    • /
    • pp.263-268
    • /
    • 2004
  • Two field cooling tests were conducted to evaluate the cooling characteristic of paddy with a prototype grain cooler. The first test was carried out during summer season in a steel bin with 180.3ton of paddy at Sunchon. And the second test was carried out during harvesting season in a steel bin with 272.2ton of paddy at Ulsan. At the first test, initial paddy temperature of 23.6$^{\circ}C$ was dropped to 14$^{\circ}C$, and initial moisture content of 19.9% was dropped to 19.3% after 52.5 hours of cooling. At the second test, initial paddy temperature of 16.1$^{\circ}C$ dropped to 5.5$^{\circ}C$ after 78.0 hours of cooling. And, at the first test, the average air flow rates of chilled air leaving the grain cooler and penetrating the grain layer were 77.5 ㎥/min and 42.5 ㎥/min, respectively. To prevent leakage of chilled air from plenum chamber of steel bin, which was about 45% of the average air flow rates of chilled air leaving the grain cooler, a proper method was required. The average total power consumption at the first test during summer was 22.1 ㎾ with control of fan damper. At the second test, it was 17.4 ㎾ due to controlling the capacity of compressor with unloading solenoid valve and changing the flow rates of hot refrigerant gas flowing into evaporator and reheater from compressor, resulting in 27% reduction of energy consumption.

A Contemporaneous and Lagged Effects of Social Supports on Self-esteem Development Trajectory of Multicultural Adolescents (다문화 가정 청소년이 지각한 사회적 지지가 자아존중감 발달궤적에 미치는 동시효과와 지연효과)

  • Yeon, Eun Mo;Choi, Hyo-Sik
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.9
    • /
    • pp.190-198
    • /
    • 2020
  • The purpose of this study was to investigate the changing trajectory of self-esteem and to explore contemporaneous and lagged effects of social supports(family, friends, and teacher) of 4th graders in elementary school to 9th graders in middle school. The subjects were 1,296 multiethnic students, who participated in the Multicultural Children and Adolescents Panel Study(MCAPS) from 2011 to 2016. The results of piecewise growth function showed that students' self-esteem was increased during upper grade in elementary school but soon deceased during middle school. Individual differences were found at initial, 1st and 2nd changing status. Students with higher level at initial status in self-esteem showed less increased pattern during elementary school but greater decreased pattern during middle school. In addition, supports from family and teacher showed contemporaneous effects across all 6 years while supports from friends showed such effects only for 5 years except 9th grade. Lagged effects of family were found in elementary school and significant lagged effects with supports from friends were found at 6th and 8th grade. The results of this study imply that the social support of family, friends, and teacher has an important role to encourage the self-esteem of multicultural adolescents.