• Korean Journal of Microbiology
• /
• v.27 no.2
• /
• pp.130-138
• /
• 1989

Microbiological parameters such as bacterial biovolume and biomass in Soyang Reservoir was statistically analyzed with the physico-chemical enviromental factors. Analysis of correlation and multiple regression showed that temperature affects most of microbiological parameters. Variations of total bacterial number, total bacterial biovolume and saprophyte number were highly correlatd with the concentrations of chlorophyll a and pheophytin a. Bacterial production by the $^{3}H$-thymidine incorporation rate was largely affected by Seston. It suggests that microbiological factors such as bacterial biovolume and bacterial biomass were controled by the concentration of seston and distribution of phytoplankton which acts as carbon and energy source for the bacterial community in the water column of Soyang Reservoir.

• The Journal of Engineering Geology
• /
• v.20 no.1
• /
• pp.89-100
• /
• 2010

Although various methods for determination of damage threshold in rock have been suggested, clear damage thresholds were determined by some methods, but different thresholds were measured by other methods. We determined the damage thresholds in Hangdeung granite using all the methods suggested, and investigated the best methods, applicability and errors of each method. The crack initiation threshold and the crack damage threshold which are important in investigation of characteristics of crack development and failure were verified by field strength ratio method and long-term constant load test. The crack closure stress and the crack initiation stress were 57.5 MPa and 77.6 MPa, and the most exact values were yielded by crack volumetric strain. The secondary crack initiation stress was 90.6 MPa and AE event count and AE event count rate were the effective methods. The volumetric stiffness, AE event count and AE event count rate were the most effective methods for determination of crack coalescence threshold and crack coalescence stress was 110.3 MPa. The crack damage stress was 127.5 MPa and was measured correctly by volumetric stiffness and AE event count rate. The ratio between crack initiation stress and uniaxial compressive strength was 0.47 which was very similar with the FSR value of 0.46. The ratio between crack damage stress and uniaxial compressive strength was almost the same as the ratio between long-term strength and uniaxial compressive strength, indicating that the crack initiation stress and the crack damage stress measured were correct.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.607-614
• /
• 2016

The study investigates the necessity of 3 dimensional dose distribution evaluation instead of point dose and 2 dimensional dose distribution evaluation. Treatment plans were generated on the RANDO phantom to measure the precise dose distribution of the treatment site 0.5, 1, 1.5, 2, 2.5, 3 cm with the prescribed dose; 1,200 cGy, 5 fractions. Gamma analysis (3%/3 mm, 2%/2 mm) of dose distribution was evaluated with gafchromic EBT2 film and ArcCHECK phantom. The average error of absolute dose was measured at $0.76{\pm}0.59%$ and $1.37{\pm}0.76%$ in cheese phantom and ArcCHECK phantom respectively. The average passing ratio for 3%/3 mm were $97.72{\pm}0.02%$ and $99.26{\pm}0.01%$ in gafchromic EBT2 film and ArcCHECK phantom respectively. The average passing ratio for 2%/2 mm were $94.21{\pm}0.02%$ and $93.02{\pm}0.01%$ in gafchromic EBT2 film and ArcCHECK phantom respectively. There was a more accurate dose distribution of 3D volume phantom than cheese phantom in patients DQA using tomotherapy. Therefor it should be evaluated simultaneously 3 dimensional dose evaluation on target and peripheral area in rotational radiotherapy such as tomotherapy.

• Journal of the Korean Society of Groundwater Environment
• /
• v.4 no.3
• /
• pp.144-152
• /
• 1997

In this study the experiment on water retention cure was conducted by using a volumetric pressure plate extractor for two different soils (SUS and KUS). When the volumetric pressure plate extractor is used, the volume of water removed from the soil sample at each increasing pressure step can be accurately measured and retained. When pressure values are subsequently reduced, the volume of water that returns to the soil can then also be accurately measured. The hysteresis effect of water retention curve was considered in the experiment. Parameters of water retention function were estimated by fitting experimental data with three proposed equations. Results of estimation showed that parameters of Gardner, Brooks-Corey and van Genuchten equations were found to be associated with air-entry value and width of size distribution. Consequently van Genuchten equation was proved to be best fined through the measured data points.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.270-278
• /
• 2019

This study was performed to compare the aerodynamic characteristics of young and elderly adult male patients with voice disorders during continuous speech. Aerodynamic measurements were obtained after 12 young male patients and 9 elderly male patients read a paragraph. The elderly group showed longer duration, lower airflow rate and air volume than the younger group, but the differences were not significant except phonation time. So, when interpreting the meaning of aerodynamic measures of elderly voice disorder patients in the aspects of airflow and air volume, it should take into account various conditions(e. g. reading materials, pulmonary functions) as well as age.

• Geotechnical Engineering
• /
• v.9 no.4
• /
• pp.65-82
• /
• 1993

A series of torsion shear tests were performed to study the drained stress -strain behavior of medium dense Santa Monica Beach sand under various stress paths. The torque was applied to both clockwise and counterclockwise directions at the end of hollow cylinder specimen. Two clip gages had been previously used to measure the changes in wall thickness and diameter of the specimen. In this study, however, the lateral strain was determined by measuring volume changes in specimen. Specimens were prepared by the air pluviation method and gaseous carbon deozide( CO2) was used to measure precisely volumetric strain in specimen. The drained stress -strain behavior of cohesionless Boils during rotation of principal stress directions was analysed based on the results of torsion shear tests. The coupling of mal stress were applied. It was also found from the test results that the atrial strain at failure decreased with increasing value.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1109-1110
• /
• 2011

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.443-446
• /
• 2000

본 연구는 과학적이고 실험적인 접근을 통하여 공간의 비례와 실내음향과의 상관관계를 규명하기 위하여 체적과 마감재료가 같고 비슷한 기본축척의 모델을 중심으로 가로, 세로, 높이의 비율이 다른 4개의 모델에서 각각 SPL, EDT, C, RT, LEF, IACC 등을 측정하여 각 형태의 모델의 값을 비교 분석하였다. 실험결과 잔향은 동일한 체적인 경우 음원으로부터 평균거리가 멀리 위치한 장방형의 형태가 양쪽 측벽 사이의 거리가 넓은 장방형보다 잔향시간이 긴 것으로 나타났다. 음압은 실의 체적이 작고 음원으로부터의 평균거리가 짧은 순서로 큰 반면, 명료도는 잔향의 크기순서에 반대로 분석되었으며 특히 음원으로부터의 직선거리가 짧은 순서로 명료도가 좋게 나타났다. IACC는 양쪽 측벽의 거리가 가장 긴 모델에서 가장 작게 나타났다 그러나, 초기 음장에서는 그 변화가 작게 나타났는데 이것은 IACC가 실의 형태에 장시간 관여하는 지수라는 것을 의미한다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1989.10a
• /
• pp.1.1-10
• /
• 1989

본 연구에서는 유효응력 개념에 기초를 둔 응력-변형을 관계식을 이용하여 비배수 지하굴착 거등을 모댈하기 위한 수치해석적 방법이 개발된다. 비배수 조건 시 적용되는 체적불변형 조건은 조건방정식(Penalty formulation)의 혁태로 공극수압 변수를 이용하여 주어지며 결과되는 유한요소 방정식에 상닻히 른 물외 체적변형 개수를 부여함으로서 이루어진다. 이러한 형태와 조건식은 지하굴착 과정에서 발생되는 비배수 공극수압의 계산을 가능케 한다. 체적불변형 조건 부여 시 발생되는 mesh locking은 그 결과에 상당한 영향을 미치므로 이러한 mesh locking 문제는 T-방법에 근거를 둔 salective 적분방법월 적용함으로서 해결될 수 있다. 또한 흙의 거등을 모델하기 위하여 사용 된 Cam-Clay모텔과 Drucker-prager모텔에 새로운 implicit 웅력적분 방법을 적용함으로서 효율적인 방법으로 비선형거동을 해석할 수 있다. 개발된 지하 굴착 해석방법의 적용성을 검증하기 위하여 실재 현장에서 측정된 지하굴착 거동을 예제로 이용하였다.

• 한국지형공간정보학회:학술대회논문집
• /
• 2003.09a
• /
• pp.195-199
• /
• 2003

대규모 토목공사에서 토량환산계수는 공사물량 및 공사비에 미치는 영향이 크므로 합리적인 토량환산계수의 설계가 요구된다. 그러나 토량환산계수의 산정에 있어서 선정시험에 의한 결과치가 아닌 통상적으로 사용하고 있는 설계기준서에 제시된 값을 적용함으로써 정확한 잔토 및 부족토량의 산정에 있어서 많은 어려움이 따르며, 이러한 경우 현장여건에 적합한 대규모 현장시험을 실시하여 토량환산계수를 산정하는 것이 바람직하다. 또한 대규모 현장시험에 있어서 굴착부분의 체적은 토량환산계수 산정에 있어 매우 중요한 요소가 된다. 따라서, 본 연구에서는 대규모 현장을 대상으로 절 성토부 풍화암의 굴착부분의 체적을 정확히 산정하기 위하여 수치사진측량기법을 적용하였으며, 이를 Total Station에 의한 측량방식과 비교 분석하였다. 그 결과, 교차에 대한 상대정확도는 평균 0.5%로 산출되었으며, 체적에서 0.5%의 상대정확도는 길이 측정에서 0.17% 상대정확도에 해당되므로 정확한 측량이라 판단된다.