• Korean Journal of Computational Design and Engineering
• /
• 제3권2호
• /
• pp.87-102
• /
• 1998

Given a sequence of cross-sectional curves, the skinning method generates a freeform surface that interpolates the given curves in that sequence. This thesis presents a construction method of a B-spline skinning surface that is fair and satisfies volume constraints. The fairness metric is based on the parametric energy functional of a surface. The degrees of freedom in surface control are closely related lo control points in the skinning direction. The algorithm fur finding a skinning surface consists of two step. In the first step, an initial fair surface is generated without volume constraints and one coordinate of each control point is fixed. In the second step, a final surface that meets all constraints is constucted by rearranging the other coordinates of each control point that defines the initial surface A variational Lagrange optimization method produces a system of nonlinear equations, which can be solved numerically. Moreover, the reparametrization of given sectional curves is important for the construction of a reasonable skinning surface. This thesis also presents an intuitive metric for reparametrization and gives some examples that are optimized with respect to that metric.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권3호
• /
• pp.398-404
• /
• 1999

The EGR is needed for one of various strategies to reduce NOx emission. But to get the proper EGR rate the intake and exhaust system become complicated. That is a reason why we consider using the built0in EGR system. The built-in EGR is a system which reduces Nox by controling the residual gas fraction in cylinder by changing valve timing and valve lift of intake and exhaust. In this paper characteristics of volumetric efficiency and residual gas fraction in cylinder were investigated for various engine speeds by changing valve timing and valve lift of intake and exhaust. In this paper characteristics of volumetric efficiency and residual gas fraction in cylinder were investigated for various engine speeds by changing valve timing and valve lift of intake and exhaust in the 4 stroke-cycle diesel engine. Volumetric efficiency and residual gas fraction were calculated by the method of characteristics. As the results the possibility of suing the built-in EGR system was confirmed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권3호
• /
• pp.405-411
• /
• 1999

Dynamic effect of gas in exhaust manifold influences the volumetric efficiency of the engine. Especially in case of multi-cylinder engine the shape of exhaust manifold is important for the opti-mum design of exhasut manifold complicated. In this paper the effects of exhaust manifold systems on volumetric efficiency were investigated for the 4 cylinder 4 stroke-cycle diesel engine. Volumetric efficiency was calculated by the method of characteristics. The calculation results coincided well the test results. This study showed that the appropriate position and diameter of exhaust manifold branch are important factors in increasing volumetric efficiency and decreasing pumping loss.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제2권4호
• /
• pp.112-119
• /
• 1994

This study is investigated into the dynamic effect of the manifold configuration during the gas exchange processes using both simulation and experiment, In theoretical study on the flow analysis, the characteristic method is applied to solve the compressible unsteady flow equation, involving the several steady flow boundary conditions. In order to excute the engine experiment efficiently, a data acquisition system is configured by using A/D converter and PC. Good results which coincided experimental data with simulation output were obtained, and it shows that this simulation method can be applied to obtain the optimal design parameters in the intake and exhaust systems.

• Journal of Biomedical Engineering Research
• /
• 제22권2호
• /
• pp.127-132
• /
• 2001

의료 영상에서 관심 있는 부위를 3차원으로 재구성하여 보는 것은, 정확한 진단을 위해서 매우 중요하다. 이러한 3차원 재구성을 위해서는 관심 있는 영역의 분할이 필수적인 선행작업이다. 본 논문에서는 관도계 기관의 분할을 위해서 슬라이스 영상의 정보를 이용한 3차원 영역 성장법을 제안한다. 제안된 방법은 2차원 슬라이스 영상에서 영역 성장법에 의해 영역을 확장시키고, 그 이웃한 슬라이스들에 씨앗점을 전달하여 재귀적으로 3차원 체적을 확장하여 영상을 분할한다. 이때, 이웃한 슬라이스간의 영역의 크기의 제약을 이용하여 새나감을 방지한다. 제안된 방법을 기관지의 분할에 적용한 결과, 새나감 없이 뾰족한 가지들까지도 성공적으로 분할했으며, 튜브의 중심 축이 고차원 곡선인 경우에도 성공적으로 분할했다.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.50-50
• /
• 2002

물리흡착은 기체와 표면간의 상호작용이 반데르발스 힘에 의한 흡착현상으로 평형상태에서 물리적인 조건 변화만으로 흡착과 탈착이 가능하다. 이러한 흡착측정 데이터는 흡착 시스템에 대한 다양한 정보를 제공해주게 된다. 기체와 표면간의 상호작용 포텐셜, 흡착된 물질의 물리적 상태, 흡착막의 두께, 흡착구조, 흡착량 등이 결정될 수 있다. 이러한 정보는 흡착 및 탈착 등온곡선의 분석을 통하여 사용된 흡착제의 비표면적 및 기공의 기하학적 구조에 대한 것도 유추할 수 있게 한다. 본 실험실에서는 흡착량을 직접 측정하는 체적식 흡착측정 방법, 흡착량을 간접적으로 측정하는 광 및 관련 흡착시스템 및 수정진동자를 이용한 박막에서의 흡착측정 방법들을 소개하며 기공표준화에 적용하고자 한다.

• Journal of the Korean Geotechnical Society
• /
• 제28권3호
• /
• pp.55-66
• /
• 2012

To investigate the hysteresis of the suction stress in unsaturated weathered mudstone soils (CL), matric suction and volumetric water content were measured in both drying and wetting processes using Automated Soil-Water Characteristics Curve Apparatus. The drying and wetting processes in unsaturated soils were reproduced in the test; the drying process means to load matric suction to spill pore water from the soils, and the wetting process means to unload matric suction to inject pore water into the soils. Based on the measured result, Soil Water Characteristic Curve(SWCC)s were estimated by van Genuchten model (1980). SWCCs have nonlinear relationship between effective degree of saturation and matric suction. The hysteresis in SWCCs between drying and wetting processes occurred. As a result of estimating Suction Stress Characteristic Curve(SSCC) using Lu and Likos model (2006), the suction stress rapidly increased in the low level of matric suction and then increased slightly. Also, the hysteresis in SSCCs between drying and wetting processes occurred. In order to design geo-structures and check its stability considering unsaturated soil mechanics, therefore, it is more reasonable that the SSCC of drying process should be applied in the condition of rainfall infiltration and the SSCC of wetting process in the condition of evaporation or drainage.

• Journal of the Korean GEO-environmental Society
• /
• 제14권12호
• /
• pp.5-12
• /
• 2013

In this study, weathered granite model tests were performed to investigate the variation of volumetric water content and matric suction by the adsorption and desorption processes of artificial rainfall. It has been compared with numerical analysis in unsaturated condition. As the results, the behaviors of volumetric water content and matric suction were distinguished by the seepage distance separated into higher, middle and lower area, and the drainage layer located at the bottom of the experimental device. In the adsorption process, the instantaneously large change of matric suction and water content were related to the increase of permeability in soil. However, in the desorption process, the change of matric suction and water content were gradually small because of the decrease of permeability. The volumetric water content and matric suction showed the difference according to the seepage distance, however the typical characteristic curves were made by the adsorption and desorption processes.

• Journal of Korea Water Resources Association
• /
• 제31권2호
• /
• pp.123-132
• /
• 1998

Monitoring solute transport has been known to be difficult especially for the unsaturated soil. The object of this study is to investigate the TDR application to monitoring solute concentration in the vadose zone. The TDR calibration test was conducted for soil samples with various water contents and concentrations. The voltage attenuation of electromagnetic wave of TDR was used to estimate the bulk electrical conductivity of a soil. The relationship between the bulk soil electrical conductivity and the solute concentration was assumed to be linear at a constant volumetric soil water content. In this study four proposed relationships were compared using data obtained from KCI solution at three different concentrations. Relationships given by Topp, Daltaon, Yanuka showed the linearity between the bulk soil electrical conductivity and the solute concentration, which were more pronounced than Zegelin's. The three relationships were found to be useful to measure the solute concentration in the vadose zone. In addition, TDR method was proven to be a viable technique in monitoring solute transport through unsaturated soils in transient flow condition.

• Journal of Korean Tunnelling and Underground Space Association
• /
• 제19권5호
• /
• pp.799-812
• /
• 2017

Backfill grouting and realistic convergence distribution were not properly considered in previous studies on 2D numerical analysis of a shield TBM tunnel. In this study, a modeling method was suggested to cope with this problem by considering a realistic convergence distribution and proper properties of backfill grouting. To this end, the influence of gap parameter and depth of rock cover on volume loss and composed of ground volume loss around tunnel excavation and surface volume loss were analyzed with a single layer of weathered soil. As a result, most of surface settlements were occurred immediately after excavation. Additional, as depth of rock cover and gap parameter increased, the influence range of surface settlement curves obtained from 2D numerical analyses became broader than a suggested theoretical equation. Therefore, it is inferred that gap parameter should be applied based on load distribution ratio and the property of backfill grouting properly considered for the estimation of the precise behavior of a shield TBM tunnel in 2D numerical analysis.