• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.67-68
• /
• 2001

제지공장은 에너지 다소비 업종이며 고도의 장치산업이기 때문에 초지 설비의 효과적 운영을 통한 생산성 극대화가 경제성과 직결되어 었다. 또한 24시간 연속생산을 하는 초지 설비로 소비자가 선호하는 품질의 종이를 생산하기 위해서는 공정의 안정성 이 매우 중요하다. 이는 공정의 불안정화는 생산제품의 품질 변화를 유발함으로써 균일 성을 저하시키는 악영향을 미치기 때문이다. 제지 공정의 안정화를 저해하는 인자에는 지절, 지종 변화, 조업중단, 조업재개 둥과 공정의 특성상 수반되는 돌발사태 등이 있을 수 있다. 이들 인자 가운데 가장 심각하게 공정의 안정성을 악화시키는 것은 지절의 발 생이라 할 수 있다. 지절이 발생되면 생산성 저하 등의 여러 문제점이 발생하기도 하지 만 다량의 파지가 발생되기 때문에 공정 안정성 면에서 볼 때에도 부득이하게 생성된 다량의 파지를 공정에 재투입하기 위해 재해리해야하므로 많은 양의 백수가 소모되며 이에 따라 예기치 않은 공정 백수의 사용으로 전체 백수계에 갑작스런 변동이 생기게 된다. 백수가 파지의 해리에 사용됨에 따라 공정 내에는 추가적인 청수가 공급되어야 하므로 전체적으로는 청수의 사용량도 늘어난다. 또한 증가된 파지의 재사용도 대부분 의 공장에서 broke chest의 용량이 한정되어 있으므로 이의 적절한 컨트롤은 중요하다. 더욱이 점차 공정이 고폐쇄화됨에 따라 공정 컨트롤에 대한 여유가 적으므로 백수와 공정의 관리는 점차 어려워지고 있다. 공정 시율레이션은 현존하는 공정을 수학적으로 모델화하여 이를 컴퓨터 하드 왜어를 이용해 실제 공장에서 일어나는 상황을 모사하는 것이다. 이러한 공정 모사는 새로운 공장을 설계하기 전에 타당성 조사와 여러 가지 사례조사를 실시할 때, 기존 공 장의 개조나 증설 또는 기존 공장의 운전조건을 실제로 변경하기 전에도 미리 모사를 함으로써 실제 시험 운전을 하는 경우 보다 많은 비용과 시간을 절약할 수 있다. 본 연 구는 백상지 생산 공정 설계도면을 참고하여 상용 시율레이터로 시율레이션 모델을 구 축하고 이를 기반으로 지절 상황을 모사하였으며, 지절 후의 공정 불안정화 상황을 파 악하였다. 또한 이러한 상황의 대책을 강구하기 위해 다양한 공정 조절 방안을 시율레이션 모댈에 적용하여 그 결과를 해석하였다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.4
• /
• pp.265-270
• /
• 2002

Most of all the mechanical devices are becoming more high-speed and high-power as well as their used condition being more pollution with rapid development in industrial part. So, it is necessary for these devices to equip cooling system to overcome that kind of severe using condition. Industrial development and income increase causes rapid increase in using fossilenergy and it results in accelerating environmental pollution owing to the increasement in emission of air pollution substance. Specially, fresh water like stream and river water is acidified. Therefore, corrosion damage is accelerated in radiator for automobile that is using acidified water. So, in this study, corrosion test was carried out in distilled and tap water for the investigation on the corrosion behavior of Al-alloy that is using as material for radiator of automobile The main results obtained are as follows According to increase of temperature, open circuit potential is decreased in fresh water. And open circuit potential after deaeration is lower than that before deaeration. Corrosion current density in distilled water is less drained than that of tap water. And Corrosion current density after deaeration is less drained than that before deaeration.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1353-1364
• /
• 2018

This study proposed a method to detect Cochlodinium polykrikoides red tide pixels in satellite images using a logistic regression model of machine learning technique under Imbalanced data. The spectral profiles extracted from red tide, clear water, and turbid water were used as training dataset. 70% of the entire data set was extracted and used for as model training, and the classification accuracy of the model was evaluated using the remaining 30%. At this time, the white noise was added to the spectral profile of the red tide, which has a relatively small number of data compared to the clear water and the turbid water, and over-sampling was performed to solve the unbalanced data problem. As a result of the accuracy evaluation, the proposed algorithm showed about 94% classification accuracy.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.2
• /
• pp.120-134
• /
• 2023

In this study, hydrodynamic characteristics of dam break flow were investigated by a series of experiments. The experiments were performed in a 2-D rectangular flume with obtaining instantaneous images of dam break flow to capture the free surface elevation, and pressure distributions on vertical wall and bottom of the flume. The initial water depth of the dam break flow was changed into 3 different heights, and the gate opening speed was changed during the experiments to study the effect of the gate speed in the dam break flow. Generation of dam break phenomena could be classified into three stages, i.e., very initial, relatively stable, and wall impact stages. The wall impact stage could be separated into 4 generation phases of wall impinge, run-up, overturning, and touchdown phases based on the deformation of the free surface. The free surface elevation were investigated with various initial water depth and compared with the analytic solutions by Ritter (1892). The pressures acting on the vertical wall and bottom were provided for the whole period of dam break flow varying the initial water depth and gate open speed. The measurement results of the dam break flow was compared with the hydrodynamic characteristics of green water phenomena, and it showed that the dam break flow could overestimate the green water loading based on the estimation suggested by Buchner (2002).

• Radiation Oncology Journal
• /
• v.15 no.3
• /
• pp.225-231
• /
• 1997

Purpose : Radiation therapy in combination with surgery has an important role in the therapy of the head and neck cancer We conducted a prospective study for patients with head and neck cancer treated with surgery and radiation to evaluate the effect of therapies on the thyroid gland, and to identify the factors that might influence the development of hypothyroidism. Materials and Methods : From September 1986 through December 1994, 71 patients with head and cancer treated with surgery and radiation were included in this prospective study. Patients' age ranged from 32 to 73 years with a median age of 58 years. There were 12 women and 59 men. The primary tumor sites were larynx in 34 patients, hypopharynx in 13 patients, oral cavity in 12 patients, unknown primary of the neck in 6 patients, salivary gland in 3 patients, maxillary sinus in 2 patients, and oropharynx in 1 patient. Total laryngectomy with neck dissection was carried out in 45 patients and neck dissection alone in 26 patients. All patients were serially monitored for thyroid function (T3, T4, free T4, TSH, antithyroglobulin antibody and antimicrosomal antibody) before and after radiation therapy. Radiation dose to the thyroid gland ranged from 40.6Gy to 60Gy with a median dose of 50Gy The follow-up duration was 3 to 80 months. Results :The overall incidence of hypothyroidism was 56.3\%$);7 out of 71 patients $(9.9\%)$ developed clinical hypothyroidism and 33 patients $(46.4\%)$ developed subclinical hypothyroidism. No thyroid nodules, thyroid cancers, or hyperthyroidism was detected. Hypothyroidism developed earlier in patients who underwent total laryngectomy with neck dissection than in patients with neck dissection alone (P<0.05). The risk factor that significantly influenced the incidence of hypothyroidism was a combination of surgery (total laryngectomy with neck dissection) and radiation therapy (P=0.0000), Four of 26 patients $(15.4\%)$ with neck dissection alone developed hypothyroidism while 36 of 45 patients $(80\%)$ with laryngectomy and neck dissection developed hypothyroidism. Conclusion : The hypothyroidism following surgery and radiation therapy was a relatively common complication. The factor that significantly influenced theincidence of hypothyroidism was combination of surgery and radiation therapy. Evaluation of thyroid function before and after radiation therapy with periodic thyroid function tests is recommended for an early detection of hypothyroidism and thyroid hormone replacement therapy is recommended whenever hypothyroidism develops.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.10a
• /
• pp.31-33
• /
• 2010

ECDIS(Electronic Chart Display and Information System 전자해도정보시스템)와 같이 진보된 IT 기술을 적용한 항해장비는 단순히 항해의 목적으로 사용하는 것 이상으로, 해양환경의 보호와 감시에 응용하는 등의 방법으로 그 활용범위를 직접적이고 적극적으로 확대할 수 있다. 종이해도와 달리, ECDIS는 '시간'이라는 4차원적 요소를 도입함으로써 동적시스템(Dynamic System)으로 전환이 용이하다. 이것은 조석, 조류, 바람과 파도와 같은 시간변수(Time Variables) 데이터를 적용함으로써 가능하다. 이 시간변수들을 어군이동위치, 계절변화에 따른 해저지형, ballast water의 취수를 위한 청수지역 등과 함께 활용을 한다면, green ECDIS를 활용한 green navigation은 현실화가 가능하다. 이에 따라 해상종사자의 환경인식은 뚜렷하게 그리고 유용하게 증가할 것이다. 본 논문에서는 green ECDIS의 개념과 모형의 설계 그리고 프로토타입의 개발을 제안하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.266-269
• /
• 2003

In this work, a new formulation is presented for analyzing the transient electromagnetic response from wire antennas using the time-domain integral equation. The solution method is based on the Galerkin's method that involves separate spatial and temporal testing procedures. Piecewise triangle basis functions have been used for spatial expansion functions for arbitrarily shaped wire structures. The time-domain variation is approximated by a set of orthonormal basis functions that are derived from the Laguerre polynomials. The method presented in this paper results in very stable transient responses from wire antennas.

• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.150-150
• /
• 2001

목적： 두 종류의 MR 기종에서 정상 성인의 두개 내 Frontal White Matter와 Basal Ganglia를 대상으로 서로 다른 TE에 대해 MR 분광법을 시행하여 기종 내, 기종간의 정상 값의 차이가 있는지 알아보았다. 대상 및 방법： 신경학, 형태학적으로 이상이 없는 8명의 자원자(평균나이 24세)를 대상으로 하였고 지원자 개개인에게 두 개의 서로 다른 1.5T MR 기종(A, B기종)에서 각각 TE를 달리하여 Frontal White Matter, Basal Ganglia를 대상으로 MR 분광법을 시행하였다. 사용한 pulse sequence는 PRESS 방법이며, TR/TE는 3000/22(25),136(144)msec, 선택체적의 크기는 20$\times$20$\times$20(mm$^3$)로 하였다. MR 기종 A는 manual prescan, B는 automatic prescan을 이용하여 최적의 분광정보를 얻었다. 각각의 MR장치에서 얻은 분광 데이터는 본 기관에서 제작된 S/W로 PC에서 처리하여 각 대사물질 피크 면적의 NAA/Cr, Cho/Cr값을 구하였고, TE값에 따라 MR 기종 내 및 기종간의 정상 값의 차이가 있는지 알아보기 위해 Faired-Comparison t-test(p<0.05)를 이용하여 분석하였다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.435-440
• /
• 2001

In this study, torsional and lateral vibrations of a gear box transmission system were analyzed theoretically using some mathematical models and examined to determine the causes of its excessive vibrations. As the results, it was found there exist possibility of resonance between gear mesh frequencies and lateral vibration mode of the transmission shaft during the third shifting mode operation. In order to avoid this resonance, we proposed changing the arrangement of gears on the transmission shaft. The measured vibration levels of the improved gear box were dramatically reduced. These results may be helpful to design a machine tool gear box with low noise and vibration.

• Journal of Power System Engineering
• /
• v.15 no.2
• /
• pp.25-30
• /
• 2011

A fresh water generation system is designed for converting brackish water or seawater into fresh water. In this paper fresh water generation by distillation process that evaporates feed water and subsequently condenses vapor as evaporation product to get fresh water was studied and city water was employed as feed water. The system uses the ejector to create a vacuum, under which liquid can be evaporated at lower temperature than it at normal or atmospheric condition, hence less energy consumption. The effect of various operating conditions i.e. temperature of feed water and different orifice diameters were studied experimentally to investigate the characteristic of the system. It was found that these parameters have significant effect in the performance of fresh water generation system with low pressure evaporation.