• Tunnel and Underground Space
• /
• v.14 no.6 s.53
• /
• pp.429-439
• /
• 2004

The deep underground High Level Waste (HLW) repository to dispose of 36,000tons of spent fuel from the reactors in Korea needs about $4km^2$ repository area. In this study, the deep undergrond repository layout was optimized to minimize the excavation rock volume as well as underground repository area. In the optimization, the results from thermal analysis were used to define the influence of tunnel and deposition hole spacings on repository layout. The repository area and excavation rock volume could be reduced with longer disposal tunnel length. When it is necessary to reduce the repository area with satisfying thermal criteria, it is better to reduce tunnel spacing and increase deposition hole spacing. In contrast, the excavation rock volume can be reduced by increasing the tunnel spacing and decreasing the hole spacing.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.120-123
• /
• 2001

국내 원전에서 배출되는 사용후핵연료의 안정한 장기 보관과 평화적 재활용을 위한 많은 연구중에서 금속저장체 연구는 사용후핵연료의 장기 보관에 따른 부식 문제 해결과 방사성 붕괴열 제거 관점에서 관심을 끌고 있다. 본 논문에서는 고준위 방사성폐기물로 분류되는 금속저장체를 국내 심지층 암반에 영구 처분했을 때 발생하는 처분장 요구 면적과 영구 처분에 따른 방사선적 안전성에 관한 고찰을 통해 금속 저장체를 이용한 사용후핵연료 관리의 장단점을 분석하였다. 예비 조사 결과 주어진 데이터 조건에서는 금속 저장체는 고준위 방사성폐기물 처분장의 면적을 5 배 정도 줄일 수 있을 것이며 방사선적 안전성 또한 우수한 것으로 판명되었으나 향후 경제성과 핵비확산성을 고려한 종합적인 타당성 연구가 수행되는 것이 바람직하다고 판명되었다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.2
• /
• pp.151-159
• /
• 2017

A deep geological disposal at a depth of 500 m in stable host rock is considered to be the safest method with current technologies for disposal of spent fuels classified as high-level radioactive waste. The most important requirement is that the temperature of the bentonite buffer, which is a component of the engineered barrier, should not exceed $100^{\circ}C$. In Korea, the amount of spent fuel generated by nuclear power generation, which accounts for about 30% of the total electricity, is continuously increasing and accumulating. Accordingly, the area required to dispose of it is also increasing. In this study, various duplex disposal concepts were derived for the purpose of improving the disposal efficiency by reducing the disposal area. Based on these concepts, thermal analyses were carried out to confirm whether the critical disposal system requirements were met, and the thermal stability of the disposal system was evaluated by analyzing the results. The results showed that upward 75 m or downward 75 m apart from the reference disposal system location of 500 m depth would qualify for the double layered disposal concept. The results of this study can be applied to the establishment of spent fuel management policy and the design of practical commercial disposal system. Detailed analyses with data of a real disposal site are necessary.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.63-70
• /
• 1993

A simplified safety assessment is carried out on rock-cavern type disposal of LLW using the analytical repository source term (REPS) model. For reliable prediction of the leach rates for various radionuclides, degradation of concrete structures, corrosion rate of waste container, degree of corrosion on the container surface, and the characteristics of radionuclides are considered in the REPS model. The results of preliminary assessment show that Cs-137, Ni-63, and Sr-90 are dominant. For the parametric uncertainty and sensitivity analysis, Latin hypercube sampling technique and rank correlation technique are applied. The results of the potential public health impacts show that radiological dose to intruder in the worst case scenario will be negligible and that more attention should be given to near-field performance.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.346-346
• /
• 2004

차세대관리 종합공정(ACP)은 사용후핵연료의 안전하고 효율적인 관리를 위하여 제시된 건식처리공정으로 이 공정을 이용하여 사용후핵연료를 금속으로 전환하고, 고발열성 핵종(Cs, Sr)을 효율적으로 제거하여 사용후핵연료의 부피, 발열량 및 방사선의 세기를 최대 1/4까지 감소시키고, 처분용기의 소요량과 처분장의 소요면적을 1/2 이상으로 축소함으로서 처분 안전성과 경제성을 높일 수 있는 장점으로 인해 연구개발 중에 있으며, 현재 기초연구가 완료되어 실증시험 수행을 위한 상세 계획이 확정되었다.(중략)

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.349-349
• /
• 2004

차세대관리 종합공정(Advanced spent fuel Conditioning Process)은 사용후핵연료의 안전하고 효율적인 관리를 위하여 제시된 건식처리공정으로 사용후핵연료를 금속으로 전환하고, 고발열성 핵종(Cs, Sr)을 효율적으로 제거하여 사용후핵연료의 부피, 발열량 및 방사선의 세기를 최대 1/4까지 감소시키고, 처분용기의 소요량과 처분장의 소요면적을 1/2 이상으로 축소함으로서 처분 안전성과 경제성을 높일 수 있는 장점으로 인해 연구개발 중에 있으며, 이의 실증시험 수행을 위하여 ${\alpha}-{\gamma}$ type의 핫셀을 건설 중에 있다.(중략)

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.1
• /
• pp.65-72
• /
• 2008

The purpose of the HLW deep geological disposal is to isolate and to delay the radioactive material release to human beings and the environment for a long time so that the toxicity does not affect to the environment. The main requirements for the HLW repository design is to keep the buffer temperature below $100\;^{\circ}C$ in order to maintain its integrity. So the cooling time of spent fuels discharged from the nuclear power plant is the key consideration factors for efficiency and economic feasibility of the repository. The disposal tunnel/disposal hole spacing, the disposal area and thermal capacity required for the deep geological repository layout which satisfies the temperature requirement of the disposal system is analyzed to set the optimized spent fuels cooling time. To do this, based on the reference disposal concept, thermal stability analyses of the disposal system have been performed and the derived results have been compared by setting the spent fuels cooling time and the disposal tunnel/disposal hole spacing in various ways. From these results, desirable spent fuels cooling time in view of disposal area is derived. The results shows that the time reaching the maximum temperature within the design limit of the temperature in the disposal site is likely shortened as the cooling time of spent fuels becomes short. Also it seems that the temperature-rising and-dropping patterns in the disposal site are of smoothly varying form as the cooling time of spent fuels becomes long. In addition, it is revealed that a desirable cooling time of spent fuels is approximately 40-50 years when spent fuels are supposedly disposed in the deep geological disposal site with its structural scale under consideration in this study.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.304-304
• /
• 2004

차세대관리 종합공정은 사용후핵연료를 안전하고 효율적인 관리를 위하여 제시된 공정으로 이 공정을 이용하여 사용후핵연료를 금속으로 전환하고 고발열성 핵종(CS, Sr)을 효율적으로 제거할 경우 사용후핵연료의 부피, 발열량 및 방사선의 세기를 최대 1/4까지 감소시키고, 처분용기의 소요량과 처분장의 소요면적을 1/2 이상으로 축소함으로서 처분 안정성과 경제성을 높일 수 있다. 차세대관리 종합공정은 용융염 매질에서 사용후핵연료를 처리하는 건식핵연료주기 기술로서 중심적으로 연구개발을 추진하고 있는 공정기술의 일부이다.(중략)

• Nuclear Engineering and Technology
• /
• v.22 no.4
• /
• pp.315-325
• /
• 1990

The analytical repository source term (REPS) computer code is developed for the safety assessment of radioactive waste geologic repository. For reliable prediction of the leach rates for various radionuclides, degradation of concrete structures, corrosion rate of waste container, degree of corrosion on the container surface, and the characteristics of radionuclides are considered in this REPS code. For the validation of the radionuclide leach rates predicted by the REPS model, the calculated leach rates of Cs-137, Sr-85, and Co-60 are compared with two reported leaching test results. Cesium and strontium leach congruently, and the leaching test results of these species can be reproduced by the congruent leaching model included in the REPS model. In case of cobalt, the solid diffusion model is in good agreement with the leaching test results.

• The Journal of Engineering Geology
• /
• v.9 no.2
• /
• pp.89-100
• /
• 1999

This study was carried out to assess the physicochemical properties of domestic bentonites and zeolites from Tertiary Formation as the candidate material for a engineered barrier of a radioactive waste repository. Natural bentonite and zeolite samples were collected from nine bentonite mines and six zeolite mines in Yeonil-Gampo area. The commercial products of bentonite and zeolite were obtained from local companies. The collected samples were investigated to study the following physicochemical properties: X-ray diffraction patterns, swelling, cation exchange capacity(CEC), specific surface area, montmorillonite content, pH, organic carbon content, thermal property, microstruciure and chemical composition. Based on the physicochemical properties of bentonite and zeolite, the bentonites from U-41 and G-46 mines and the zeolites from Daedo and Y-1 mines are regarded as the most desirable candidate materials.