• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.81-86
• /
• 2006

This paper deals with a driving current fault monitor design methodology for a DDV actuation system which has a dual hydraulic power supply system, and triplex electric control capability. A fault existing among these redundant channels should be detected accurately and removed timely, and the remaining channels are to be reconfigured in order to compensate the role of a removed faulty channel. An integrated analysis on the aerodynamics, flight control laws, and DDV actuation system is essential for the design of an actuation system fault monitor. A method to define a fault transient boundary which specifies a maximum travel of an actuation system caused by the first faulty operation is proposed based on the top level requirement on the fault effect specified in MIL-F-8785C.

• Journal of Convergence for Information Technology
• /
• v.7 no.5
• /
• pp.117-122
• /
• 2017

In a wireless communication system, increasing the channel capacity with a limited frequency is a problem in all frequency bands. Increasing the frequency bandwidth and increasing the output can increase the channel capacity, but sometimes the communication is not possible due to interference noise. If the radio frequency allocation is set to world standardization such as WRC or ITU-R, each country has strict control over regulations. This is because one wireless communication system should not affect other systems. We present the results of a study on scenarios and analysis of radio waves to be installed inside and outside the aircraft without interfering with the wireless LAN.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.189-197
• /
• 2008

ENS-2 simulator is the most widely-used simulator in the research of wired/wireless communication. Since an IEEE 802.11 module has been implemented in NS-2. much research using this module has been done for various MAC layer functions. The most important problem in terms of performance is the hidden terminal problem. To solve this problem, the solutions using a busy-tone such as BTMA, DBTMA, etc. have been proposed. In order to be able to use a busy-tone, channels using the frequency bandwidth except the frequency bandwidth of the data channel is required for the collision prevention, and a MAC layer has to be able to menage such multiple channels. In this research, we implement a module that can use a busy-tone in NS-2, implement a modified RI-BTMA by applying the implemented module, and verify its performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.13-23
• /
• 2007

In this paper, a packet scheduling scheme that supports real-time traffic having multi-level delay constraints in OFDMA systems is proposed. The proposed scheme pursues to satisfy the delay constraint first, and then manage the residual radio resource in order to enhance the overall throughput. A parameters named tolerable delay time (TDT) is newly defined to deal with the differentiated behaviors of packet scheduling according to the delay constraint level. Assuming that the packets violating the delay constraint are discarded, the proposed scheme is evaluated in terms of the packet loss probability, throughput, channel utilization. It is then compared with existing schemes for real-time traffic support such as the Exponential Scheduling (EXP) scheme, the Modified Largest Weighted Delay First (M-LWDF) scheme, and the Round robin scheme. The numerical results show that the proposed scheduling scheme performs much better than the aforementioned scheduling schemes in terms of the packet loss probability, while slightly better in terms of throughput and channel utilization.

• Journal of Information Management
• /
• v.30 no.3
• /
• pp.27-43
• /
• 1999

The digital library operated in the environment of computer-mediated-communication offered new successful alternative plans for the field and communication methods of the information services that have been provided by the traditional library and this causes the traditional library to move to the new paradigm. In this situation, the information services of the digital library raised the necessity for the communication channels that would cope actively on the spot and for the extention of information services that would supply an unspecified number of the general public with a considerable extention of information services that neglect time and space. This study looked into the communication channels in general for interactions between the digital library and the users in the environment of computer-mediated-communication and observed patterns of communication chennels that the digital library could supply. For the development of the communication model in the digital library, the study presented the communication model for effective information services.

• Information Systems Review
• /
• v.21 no.1
• /
• pp.61-90
• /
• 2019

From the digital perspective, customer journey and customer experience management are emerging as important issues for companies. While digital customer experience has become more important due to the recent surge in online sales of the home appliance products, customers' experience in online is not differentiated as offline-focused traditional methods are maintained. This study aims to analyze the characteristics and mutual influences of customer experiences at each stage of online purchase journey, and to explore the effects on the product repurchase intention, focusing on online purchasers of home appliance which are high-involvement products. As a result, both cognitive and affective experiences of the research phase directly affect satisfaction, whereas affective experience at the purchasing stage indicated indirect effects through cognitive experience. The experience of the research phase positively affects the next phase, the purchasing experience, and the experience of the purchasing phase leads to the intention to repurchase the product. However, it is also found that, depending on the choice of online channels, the experience of research phase may affect the product repurchase intention than the purchase experience.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.119-124
• /
• 2010

디지털 제작, 압축 기술의 발전, 유무선 인터넷 보급 확산, 다양한 전송 및 서비스 플랫폼의 등장, 전송 기술의 광대역화, 단말 기술의 발전, 라이프스타일 변화와 킬러 서비스 등장으로 미디어 시장은 급속도로 발전하고 있다. 지상파 방송은 아날로그에서 디지털로 전환하고 있으며, 고화질, 다채널, 모바일, 3D 서비스를 제공하거나 제공할 예정에 있다. 현재 디지털 TV는 아날로그 TV와 동시 방송 형태로 제공되고 있지만 2012년말 디지털 TV로 완전한 전환을 앞두고 있으며, 모바일 TV인 DMB는 2005년말 본방송을 시작하여 전국 서비스를 제공하고 방송 커버리지를 확장하고 있다. FM과 AM의 디지털화를 위한 디지털 오디오 방송도 방식 선정을 위한 절차가 진행 중이다. 전파는 송신소에서 단말까지 전송되는 도중 신호레벨 감쇠, 페이딩, 왜곡, 잡음 유입 등을 겪게 된다. 양질의 지상파 방송을 제공하기 위해서는 전파가 수신 가능한 상태 이상의 양호한 상태로 시청자에게 전달되어야 한다. 이를 위해 방송사는 방송 수신 품질을 측정하고 수신이 불량한 지역에 대해서는 송신기 설치, 송신 출력 증강, 중계기 설치 등을 통해 양질의 서비스 제공이 가능한 방송 서비스 영역을 확대한다. 다양한 지상파 방송 매체에서 수신 품질 평가를 위해 가장 많이 측정하는 항목은 전계강도이다. 대부분의 경우 어떤 지역의 전계강도가 해당 매체가 요구하는 기준 레벨 이상이면 해당 지역을 양호 지역으로 평가한다. 본 논문에서는 다양한 지상파 방송 매체에 대한 전계강도를 측정하고 이를 분석할 수 있는 시스템을 제안하고자 한다. 제안 시스템을 이용하면 자동화된 절차에 의해 최단 시간에 다양한 지역에 대한 방송 수신 품질을 측정하고, 그 결과를 분석하여 방송 서비스 영역에 대한 평가를 내릴 수 있으며, 측정결과를 DB로 관리하여 동일 채널에 대한 이전 측정결과와 비교 분석, 다른 채널과 전계강도 비교 분석을 통해 특정 송신기 출력이 감소되거나 특정 안테나 출력에 문제가 발생한 경우에도 이를 쉽게 감지하여 최적의 방송망 구축 및 관리가 가능하다.

• The KIPS Transactions:PartD
• /
• v.13D no.1 s.104
• /
• pp.133-138
• /
• 2006

Electric commerce of surpassing the traditional one appeared before the public and has currently led the change in the management of enterprises. To establish and maintain good relations with customers, electric commerce has various channels for customers that understand what they want to and suggest it to them. The bulletin board and e-mail among em are inbound information that enterprises can directly listen to customers' opinions and are different from other channels in characters. Enterprises can effectively manage the bulletin board and e-mail by understanding customers' ideas as many as possible and provide them with optimum answers. It is one of the important factors to improve the reliability of the notice board and e-mail as well as the whole electric commerce. Therefore this thesis researches into methods to classify various kinds of documents automatically in electric commerce; they are possible to solve existing problems of the bulletin board and e-mail, to operate effectively and to manage systematically. Moreover, it researches what the most suitable algorithm is in the automatic classification of Q&A documents by experiment the classifying performance of Naive Bayesian, TFIDF, Neural Network, k-NN

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.373-373
• /
• 2009

Relative humidity, membrane conductivity and water activity are critical parameters of polymer electrolyte membrane fuel cells (PEMFC) for high performance and reliability. These parameters are closely related with temperature. Moreover, the ideal values of these parameters are not always identical along the channels. Therefore, the cooling channel design and its operating condition should be well optimized along the all location of the channels. In the present study, we have performed a numerical investigation on the effects of cooling channels on performance of a PEMFC. Three-dimensional Navier-Stokes equations are solved with the energy equation including heat generated by the electrochemical reactions in the fuel cell. The present numerical model includes the gas diffusion layers (GDL) and serpentine channels for both anode and cathode gas flows, as well as cooling channels. To accurately predict the water transport across the membrane, the distribution of water content in the membrane is calculated by solving a nonlinear differential equation with a nonlinear coefficient, i.e., the water diffusivity which is a function of water content as well as temperature. Main emphasis is placed on the heat transfer between the solid bipolar plate and coolant flow. The present results show that local current density is affected by cooling channels due to the change of the oxygen concentration and the membrane conductivity as well as the water content. It is also found that the relative humidity is influenced by the generated water and the gas temperature and thus it affects the distribution of fuel concentration and the conductivity of the membrane, ultimately fuel cell performance. Unit-cell experiments are also carried out to validate the numerical models. The performance curves between the models and experiments show reasonable results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.7
• /
• pp.671-676
• /
• 2016

This study is about design for the Rotational Instrument of the Industry factory which is used management safety and maintenance. We developed the multichannel vibration monitering system of the self-diagnosis for middle level CMS(Condition Monitoring System) market, and that system are new features to the expandability and flexibility. Normally one channel is used for treating one signal, but developed instrument can treat four channel with one signal processing card. One rack have redundant power supply and displace and it can check vibration measurement value in field without computer. Bearing fault detection is fundamental of vibration surveillance, but sometimes can not check with vibration velocity and acceleration. So it need the filtering and the amplitude modulation on the acceleration enveloping technology when irregular vibration is happened. We developed the vibration analysis instrument which is applied such technology. And the development prototype shows activated within the vibration error limit.