• Title/Summary/Keyword: 창호재

Search Result 166, Processing Time 0.024 seconds

Skin Friction Mobilized on Pack Micropiles Subjected to Uplift Force (인발력을 받는 팩마이크로파일의 주면마찰력)

  • Hong, Won-Pyo;Cho, Sam-Deok;Choi, Chang-Ho;Lee, Choong-Min
    • Journal of the Korean Geotechnical Society
    • /
    • v.28 no.6
    • /
    • pp.19-29
    • /
    • 2012
  • Pack micropiles were recently developed to improve pile capacity of general micropiles. Pack micropiles were made by warping thread bar or steel pipe of general micropile by geotexlile pack and grouting inside the pack with pressure. According to the pressure, the boring hole could be enlarged. A series of pile uplift tests were performed on three micropiles. Two out of the three piles were the pack micropiles and the other was the general micropile, in which a thread bar was used in the boring hole. According to the pressure applied to the pack micropiles, the diameter of boring hole was enlarged from 152 mm to 220 mm. Unit skin friction mobilized on side surfaces of micropiles increased with displacement of pile head and reached on a constant value, which represents that the relative displacement between piles (or thread bar) and soils was reached on critical state. And the uplift resistance of pack micropile was higher than that of general micropile. Two reasons can be considered: One is that the frictional surface increases due to enlarging diameter of boring holes and the other is that the unit skin friction could increase due to compressing effect of surrounding soils by soil displacement as much as the enlarging volume of boring hole. The compression effect appeared at deeper layer rather than surface layer. The unit skin friction mobilized on micropiles with small diameter was higher than the ones on large bored piles.

Nutritional Components and Antioxidant Activities of Commercial Loquat (Eryobotrya japonica) Leaf Tea (시판 비파나무잎차의 영양성분 및 항산화 활성)

  • Jeong, Chang-Ho;Kim, Il-Hun;Shim, Ki-Hwan;Bae, Young-Il
    • Journal of agriculture & life science
    • /
    • v.45 no.4
    • /
    • pp.105-112
    • /
    • 2011
  • Nutritional components and antioxidant activities of commercial loquat leaf tea (CLLT) were evaluated. Proximate compositions were as follows; moisture 5.34%, crude protein 8.38%, crude fat 13.26%, nitrogen free extract 46.21%, crude fiber 19.24% and crude ash 7.57%, respectively. Ascorbic acid and total phenolics content of CLLT was 0.47 mg/100 g and 42.55 mg/GAE g, respectively. Mineral elements were Ca 1,624.01 mg/100 g, K 1,099.66 mg/100 g, and Mg 192.70 mg/100 g, respectively. Amino acid contents of CLLT were very rich in glutamic acid 565.98 mg/100 g and deficient in cystine 12.97 mg/100 g. The 2,2'-azino-bis (3-ethylbenzthiazoline-6- sulfonic acid) diammonium salt (ABTS), 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities of hot water extract from CLLT were 72.51% and 90.11%, respectively at a concentration of $1,000{\mu}g/mL$. Reducing power and ferric reducing antioxidant power (FRAP) of hot water extract from CLLT were increased in a dose dependent manner. Therefore, these results suggest that the hot water extract of CLLT possess antioxidant activities and thus it has great potential as a source for functional food such as natural antioxidant.

A Study for Deriving Target CMV (Compaction Meter Value) of Intelligent Compaction Earthwork Quality Control (토공사 지능형 다짐 품질관리를 위한 목표 CMV(Compaction Meter Value) 도출 방안에 관한 연구)

  • Choi, Changho;Jeong, Yeong-Hoon;Baek, Sung-Ha;Kim, Jin-Young;Kim, Namgyu;Cho, Jin-Woo
    • Journal of the Korean Geotechnical Society
    • /
    • v.37 no.9
    • /
    • pp.25-36
    • /
    • 2021
  • Recently, the intelligent compaction technology for quality control of earthworks has brought attention as a quality control standard for earthworks. In this study, intelligent compaction technology and earthwork quality control methods were investigated and earthwork quality control procedures using intelligent compaction technology were considered based on field tests. Through the field compaction test of the silty sand (SM) fill material, it was confirmed that CMV and bearing capcaity index from plate load tests increased as the number of compactions increased. Based on the field test data, the average CMV and quality control target CMV were derived. The target CMV (34.2) was calculated through the correlation with the bearing capacity index of the plate load test, and the target CMV (36.6) was calculated through the analysis of the CMV increase rate. In this paper, the on-site compaction quality management procedure and methodology using intelligent compaction technology were discussed, and an intelligent compaction quality management method was proposed to promote the applicability of the technology.

Elastic Wave Characteristics in Cemented Engineered Soils (고결된 Engineered Soils의 탄성파 특성)

  • Lee, Chang-Ho;Yoon, Hyung-Koo;Lee, Woo-Jin;Lee, Jong-Sub
    • Journal of the Korean Geotechnical Society
    • /
    • v.24 no.2
    • /
    • pp.87-97
    • /
    • 2008
  • Behaviors of cemented engineered soils, composed of rigid sand particle and soft rubber particle, are investigated under $K_o$ condition. The uncemented and cemented specimens are prepared with various sand volume fractions to estimate the effect of the cementation in mixtures. The vertical deformation and elastic wave velocities with vertical stress are measured. The bender elements and PZT sensors are used to measure elastic wave velocities. After cementation, the slope of vertical strain shows bilinear and is similar to that of uncemented specimen after decementation. Normalized vertical strains can be divided into capillary force, cementation, and decementation region. The first deflection of the shear wave in near field matches the first arrival of the primary wave. The elastic wave velocities dramatically increase due to cementation hardening under the fixed vertical stress, and are almost identical with additional stress. After decementation, the elastic wave velocities increase with increase in the vertical stress. The effect of cementation hinders the typical rubber-like, sand-like, and transition behaviors observed in uncemented specimens. Different mechanism can be expected in decementation of the rigid-soft particle mixtures due to the sand fraction. a shape change of individual particles in low sand fraction specimens; a fabric change between particles in high sand fraction specimens. This study suggests that behaviors of cemented engineered soils, composed of rigid-soft particles, are distinguished due to the cementation and decementation from those of uncemented specimens.

The Effect of Syllable Frequency, Syllable Type and Final Consonant on Hangeul Word and Pseudo-word Lexical Decision: An Analysis of the Korean Lexicon Project Database (한글 두 글자 단어와 비단어의 어휘판단에 글자 빈도, 글자 유형, 받침이 미치는 영향: KLP 자료의 분석)

  • Myong Seok Shin;ChangHo Park
    • Korean Journal of Cognitive Science
    • /
    • v.34 no.4
    • /
    • pp.277-297
    • /
    • 2023
  • This study attempted to find out how lexical decision of two-syllable words or pseudo-words is affected by syllabic information, such as syllable frequency, syllable (i.e. vowel) type, and presence of final consonant (i.e. batchim), through the analysis of the Korean Lexicon Project Database (KLP-DB). Hierarchical regression of RT data showed that lexical decision of words was influenced by the frequency of the first syllable, the syllable type of the first and second syllables, batchim for the first and second syllables, and also by the interaction of the two syllable types and the interaction of syllable frequency and batchim of the second syllable. For pseudo-words lexical decision was influenced by the frequency of the first and second syllables, syllable type of the first syllable, and batchim for the first and second syllables, and also by the interaction of the two syllable frequencies, the interaction of the two syllable types, and the interaction of syllable frequency and batchim of the first syllable. Word frequency had a strong effect on lexical decision of words, while syllabic information had a stable effect on the lexical decision of pseudo-words. These results indicate that syllabic information should be seriously considered in constructing word and pseudo-word lists and interpreting lexical decision time. Understanding the effect of syllabic information will also contribute to the understanding of word recognition process.

The Development and Originality of Wind Chimes of the Goryeo Dynasty (고려시대 풍탁(風鐸)의 전개와 독창성)

  • Lee, Young-sun
    • Korean Journal of Heritage: History & Science
    • /
    • v.52 no.2
    • /
    • pp.292-307
    • /
    • 2019
  • Buddhists have always tended to adorn and embellish Buddhist statues and their surrounding spaces in order to exhibit the grandeur and sublime nature of the Buddha. The various kinds of splendid instruments and implements used in such ornamentation are collectively called jangeomgu in Korean. Thus, the term jangeomgu encompasses articles used to decorate Buddhist statues, halos, and baldachin, as well as Buddhist banners and wind chimes, which are generally hung outside a building. Wind chimes are still widely used at Buddhist temples. In China, judging from various structures such as the Wooden Stupa of Yongningsi in Luoyang and the Dunhuang Caves, wind chimes began to be used around the sixth century. As for Korea, Buddhism was first introduced from China during the Three Kingdoms Period, and Koreans accordingly began to build Buddhist temples and buildings. It would appear that wind chimes came to be used around the time that the first temples were built. The oldest extant wind chime in Korea is the gilt-bronze wind chime of Baekje, discovered at the Mireuksa Temple Site in Iksan. In general, Korean wind chimes dating from the Three Kingdoms Period are classified into two general types according to their shape and elevation, i.e., those shaped like a Buddhist bell and those shaped like a trapezoid. As these two forms of wind chimes have influenced each other over time, those made during the Goryeo dynasty, having inherited the style, structure, and design of the preceding period, display such features. At the same time, the artisans who produced wind chimes pursued technical development and adopted free, yet not extravagant, designs. In particular, Goryeo wind chimes are characterized by original designs created through exchanges with other Buddhist art forms of the same period, such as the embossed lotus design band of Goryeo bells; the bullmun design, which served to display the grandeur of the royal family; the samhwanmun design, which consisted of decorating the interior of a Goryeo incense burner with three holes; Sanskrit designs; and designs inspired by the windows and doors of stone pagodas. In this way, the production of Goryeo wind chimes developed with a focus on purpose while being free of formal constraints. This study started out from the fact that the largest number of Korean wind chimes were produced during the Goryeo dynasty. Therefore, research on wind chimes should be based on those of the Goryeo dynasty, especially since fewer relevant studies have been conducted compared to studies on other forms of Buddhist art. For the purposes of this study, the reasons for the production of wind chimes will be examined first, followed by an examination of the various styles of Korean wind chimes. Then, based on the findings of this investigation, the development and characteristics of the wind chimes produced during the Goryeo dynasty will be explored for each period.

Comparison of Educators and Students' Perception of Evaluation Criteria for Admission to Career and Technical High Schools: A Case Study (특성화고등학교 미래인재전형의 평가기준에 대한 교사와 학생의 인식비교 : 서울시교육청 특성화고 사례를 중심으로)

  • Cho, Sung Ran;Lee, Hwa-Yeong;Han, jiyoon;Ye, Cheol-Hae;Shin, Changho
    • (The)Korea Educational Review
    • /
    • v.24 no.1
    • /
    • pp.227-254
    • /
    • 2018
  • This study examines differences in perception between applicants and admissions committee members regarding evaluation criteria for admission to career and technical high schools in Seoul. This investigation, based on "The survey on policy for career and technical high school admissions," seeks to explore and consider the various criteria for selecting and evaluating students. The target populations of the survey were the educators in charge of admission and freshmen in Seoul career and technical high schools. We report three major findings, with the first pertaining to the existing criteria and policies for admission to career and technical high schools. While educators agreed with the intent and reasoning behind the school's competitive spots, they were overall dissatisfied with the selection method and the lack of a requirement for academic transcripts. Matriculated students, in comparison, expressed greater satisfaction with the existing criteria for admission. Secondly, when assessing the importance of various evaluation components in an application, educators viewed the interview and attendance record as the most valuable components of the application, followed by future plans, personal statement, volunteer work, and portfolio, in order of decreasing importance. Students ranked attendance record, interview, personal statement, portfolio, future plans, and volunteer work as most to least important components of their application. Thus, students regarded the personal statement and portfolios as being of higher priority than did the educators. The last major finding pertained to students' rationale for applying and educators' selection criteria. At the time of application, students focused on aptitude and job prospects after graduation, while educators valued personality and competence. In summary, the applicants' viewpoints and actions aligned much more closely with the mission of the Seoul Metropolitan Office of Education than did those of the educators in charge of admission. Thus, in order to establish a consensus between the policy and mission of career and technical high schools, each career and technical high school should clarify the exact criteria for their ideal candidate. There is also a need to bridge the gap in perception between the applicants and educators regarding selection strategy, to establish a harmonized evaluation criteria. These goals are necessary to attract and recruit talented, bright individuals who will meet the demands of today's society.

Radiation Exposure of Hands and Feet from $^{18}F$-FDG in Radio-technologists (방사선 작업 종사자의 작업화 및 작업복의 방사선 오염 분석)

  • Lee, Seung-Jae;Jeong, Seok;Seo, Soo-Hyun;Park, Yong-Sung;Park, Hoon-Hee;Oh, Shin-Hyun;Lim, Han-Sang;Kim, Jae-Sam;Lee, Chang-Ho
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.15 no.2
    • /
    • pp.94-98
    • /
    • 2011
  • Purpose: The radiation exposure from radioisotope at the hands and foots of radiation workers who works in PET/CT part at the department of nuclear medicine was investigated in this study. Materials and Methods: From 4th August 2010 to 14th January 2011, 6 radio-technologists' radiation on hands and feet were measured. All radio-technologist have been examined around 8; morning, 12; afternoon, and 16 o'clock; evening, respectively. SPSS version 17 was used for statistical analysis. Results: The statistical significances were calculated in several ways. The radiation from both hands and feet in the Morning was lower than Afternoon and Evening. In some cases, the detected radiation showed extremely high values in data. In order to find the effect of the ${\gamma}$-ray on the hand, the estimated doses were presumably calculated, however, the exposure dose on feet were unmeasured. Conclusion: Even if the radiation exposure from the radioisotope at the hands and feet were under the limitations, it is definitely needs to prevent the radiation-contamination. Therefore, the radio-technologists need to have a proper radiation-dealing-procedure of their own, and must try to prevent a radiation exposure by themselves.

  • PDF

Long-term Prognosis and Physiologic Status of Patients Requiring Ventilatory Support Secondary to Chest wall Disorders (흉벽질환에 의한 급성호흡부전 환자의 생리적 특성과 장기적인 예후)

  • Yoon, Seok Jin;Jun, Hee Jung;Kim, Yong Joo;Lee, Seung Jun;Kim, Eun Jin;Cha, Seung Ick;Park, Jae Yong;Jung, Tae Hoon;Kim, Chang Ho
    • Tuberculosis and Respiratory Diseases
    • /
    • v.61 no.3
    • /
    • pp.265-272
    • /
    • 2006
  • Background: Chest wall deformities such as kyphoscoliosis, thoracoplasty, and fibrothorax cause ventilatory insufficiency that can lead to chronic respiratory failure, with recurrent fatal acute respiratory failure(ARF). This study evaluated the frequency and outcome of ARF, the physiologic status, and the long-term prognosis of these patients. Methods: Twenty-nine patients with chest wall disorders, who experienced the first requirement of ventilatory support from ARF were examined. The mortality and recurrence rate of ARF, the pulmonary functions with arterial blood gas analysis, the efficacy of home oxygen therapy, and the long-term survival rate were investigated. Results: 1) The mortality of the first ARF was 24.1%. ARF recurred more than once in 72.7% of the remaining 22 patients, and overall rate of successful weaning was 73.2%. 2) Twenty-two patients who recovered from the first ARF showed a restrictive ventilatory impairment with a mean FVC and TLC of 37.2% and 62.4 % of predicted value, respectively, and a mean $PaCO_{2}$ of 57mmHg. Among the parameters of pulmonaty functions. the FVC(p=0.01) and VC(p=0.02) showed a significant correlation with the $PaCO_{2}$ level. 3) There were no significant differences between the patients treated with conservative medical treatment only and those with additional home oxygen therapy due to significant hypoxemia in the patients with recurrent ARF and the mortality. 4) The 1, 3, 5-year survival rates were 75%, 66%, and 57%, respectively, in the 20 patients who had recovered from the first ARF, excluding the two patients managed by non-invasive nocturnal ventilatory support. Conclusion: These results suggest that active ventilatory support should be provided to patients with ARF and chest wall disorders. However, considering recurrent ARF and weak effect of home oxygen therapy, non-invasive domiciliary ventilation is recommended in those patients with these conditions to achieve a better long-term prognosis.

An Initial Study on the Reliability Assurance in PET/CT Standardized Uptake Values (PET/CT 에서 표준섭취계수(SUV)의 신뢰성 확보를 위한 초기연구)

  • Park, Hoon-Hee;Kim, Jung-Yul;Lee, Seung-Jae;Park, Min-Soo;NamKoong, Hyuk;Lim, Han-Sang;Oh, Ki-Baek;Kim, Jae-Sam;Lee, Chang-Ho;Jin, Gye-Hwan
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.13 no.3
    • /
    • pp.31-42
    • /
    • 2009
  • Purpose: As the number of domestic medical institutions installing PET/CT is increasing rapidly, the transfer of PET/CT images among medical institutions is also increasing. Thus, it is necessary to collect the comparative SUV data from several medical institutions' PET/CT systems through a phantom study which semi-quantitatively compares the SUV on one bed, the change scale of the SUV on the slices, and the time of measuring. The phantom study to find differences among the SUVs from various PET/CT offers the opportunity to obtain the reliability of the SUV in PET/CT images. Materials and Methods: Ten PET/CT systems from medical institutions in Korea were used. To obtain the accurate data, the study has been using the radiation detector of Korea Research Institute of Standards and Science to verify. The internal structures of NEMA $phantom^{TM}$ were removed and Six thousand milliliters of distilled water which has 1mCi of $^{18}F$-FDG put into the phantom. The water was properly integrated with $^{18}F$-FDG using magnetic stirrer. The images were acquired at 60, 70, 80, 90, 100, 110 and 120-minutes for 3 minute each. Two hundred square centimeters of region of interests were placed and analyzed. To confirm the usefulness, the correction-table came out from patients' data. Results: The coefficient of variability of the SUV from -11.0 to 9.90 % fell into the range of international standards(${\pm}10%$) along with the SUV on a bed, the change scale of the SUV on the slices, and the time of measuring, except one PET/CT system. Using the data of the differences among the SUVs, we came to withdraw the correction-table ranging from 0.803 to 1.246. The correction-table was confirmed its usefulness through Linear Regression Analysis which was applied to normal cases. Conclusions: Although studies have been made on the variation of the SUV, there is little attention on the standardization of the SUV. Based on this study of the quantitatively comparable data about the SUV accommodating the correction-table, it would help to have more corrective diagnosis.

  • PDF