• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.282-282
• /
• 2021

강우시 농경지와 축산시설로부터 유출되는 비점오염물질은 하류 수계의 수질과 수생태계에 악영향을 미친다. 이에 따라 환경부에서는 비점오염원관리지역을 지정하고 다양한 비점오염 저감 대책을 시행하고 있다. 본 연구에서는 비점오염원관리지역으로 지정된 안동댐 하류 중 송야천 유역을 대상으로 강우유출수 모니터링을 수행하였으며, 모니터링 결과를 바탕으로 강우시 비점오염물질 유출 특성을 분석하였다. 모니터링 기간은 2020년 6월부터 11월까지 총 5회의 강우사상에 대하여 상·하류와 유입하천을 포함한 총 8개의 모니터링 지점을 대상으로 강우사상별 유량가중평균농도(Event Mean Concentration, EMC), 오염부하, 단위면적당 오염부하를 산정하였으며, 오염원 그룹별 비점배출부하를 산정하여 오염 기여도를 분석하였다. 강우유출수 조사결과를 이용한 EMC 농도 산정 결과 유입하천인 오산천 지점이 SS와 TOC 항목을 제외한 모든 수질항목의 EMC 농도가 가장 큰 것으로 나타났다. 단위면적당 오염부하를 산정하여 비교 분석한 결과 T-P 항목의 단위면적당 오염부하는 물한천 지점(0.69 kg/ha)과 오산천 지점(0.69 kg/ha)이 크게 나타났다. 결과와 같이 오산천 지점과 물한천 지점이 오염정도가 큰 것으로 나타났으며, 이에 따른 상류 오염원 현장 정밀조사를 수행하였다. 조사 결과 강우발생시 상류에 위치한 농경지와 축사에서 발생하는 오염원이 하천으로 유입되고 있었으며, 여러 축사에서 배출되고 있는 유입수를 채취하여 분석한 결과 T-P 농도가 평균 0.935 mg/L로 높게 나타났다. 전국오염원조사자료(국립환경과학원, 2017) 내용을 참조하여 송야천 유역의 오염원 그룹별 비점배출부하를 산정해 오염 기여도를 분석한 결과, T-P 항목의 경우 축산계와 토지계의 비점배출부하가 전체 비점배출부하의 약 63%와 37%를 차지해 비점배출부하 기여도가 큰 것으로 나타났다. 이와 같이 송야천 유역의 경우 강우시 농경지와 축산시설에서 배출되는 오염물질이 하천 수질오염에 상당한 기여를 하고 있는 것으로 보여지며, 비점오염원 발생에 대한 대책 마련이 필요할 것으로 사료된다. 본 연구 결과는 송야천 유역의 비점오염 저감 대책 수립을 위한 기초자료로 활용할 수 있을 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.487-494
• /
• 2009

Friction coefficients of the prestressing tendon are the basic information required to control the prestressing force introduced to PSC structure during jacking. However, the friction coefficients show considerable differences depending on the specifications, causing much confusion to designers. In this study, the ranges of the friction coefficients presented in domestic and foreign specifications are compared together to clarify the differences. Then, a procedure is proposed that can be used to estimate the wobble and curvature friction coefficients from field data such as elongation and prestressing force and from theory related to the friction. The procedure is applied to various tendon profiles of several PSC bridges constructed by ILM, FCM and MSS. The resulting values are compared with those presented in some specifications and assumed in jacking and a reasonable range of the friction coefficient is discussed. Lift-off tests are also performed in some bridges to further verify the results. The resulting wobble friction coefficients are not as small as those presented in AASHTO specifications but range from the lower limit to mid point of domestic specifications, while the curvature friction coefficients approach or slightly exceed the upper limit.

• Convergence Security Journal
• /
• v.22 no.5
• /
• pp.21-35
• /
• 2022

The use of digital information according to the development of information and communication technology and the 4th industrial revolution is continuously increasing and diversifying, and in proportion to this, crimes using digital information are also increasing. However, there are few cases of establishing an environment for processing and analysis of digital evidence in Korea. The budget allocated for each organization is different and the digital forensics laboratory built without solving the chronic problem of securing space has a problem in that there is no standard that can be referenced from the initial configuration stage. Based on this awareness of the problem, this thesis conducted an exploratory study focusing on tools and equipment necessary for building a digital forensics laboratory. As a research method, focus group interviews were conducted with 15 experts with extensive practical experience in the digital forensic laboratory or digital forensics field and experts' opinions were collected on the following 9 areas: network configuration, analyst computer, personal tools·equipment, imaging devices, dedicated software, open source software, common tools/equipment, accessories, and other considerations. As a result, a list of tools and equipment for digital forensic laboratories was derived.

• Journal of Service Research and Studies
• /
• v.11 no.1
• /
• pp.45-58
• /
• 2021

Requirements engineering can be seen as proceeding with various processes and activities such as extraction, analysis, specification, management, and verification without temporal and spatial constraints in the development environment of information systems that are becoming large and decentralized. Developing requirements well and conducting continuous evaluation and management is the shortcut to success in project management, and it is recognized as a very important matter in relation to requirements in the information system audit. When we conduct information system audit and conducting projects subject to audit, we need to improve the required engineering aspect. Therefore, this study derives inspection items suitable for the target project by referring to the audit inspection manual and audit inspection guide when conducting the current audit, and relates to the required engineering aspect among the contents of the inspection guide for each business type that is the basis for deriving the inspection items were derived for each audit point/audit area for the project management and quality assurance project type corresponding to the inspection items. The suitability of the extracted occupation items was verified through a questionnaire survey by experts.

• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.347-354
• /
• 2007

A simple and rapid high-performance liquid chromatography assay for the determination of residual novobiocin levels in bovine, porcine, chicken, flatfish and japanese eel muscle has been developed and validated. The separation condition for HPLC/UV was optimized with phenyl hexyl ($4.6{\times}150mm$, $5{\mu}m$) column with 10 mM monobasic sodium phosphate buffer (pH 2.5)/acetonitrile (50/50, v/v) as the mobile phase at a flow rate of 1.0 mL/min and detection wavelength was set at 254 nm. Residues were extracted from tissue by blending with methanol and lipid materials were removed with n-hexane. Then, the methanol extract was evaporated to dryness under a nitrogen stream, reconstituted in the mobile phase. Aliquot of the organic extract was decanted and filtered through $0.45{\mu}m$ syringe filter. The $20{\mu}L$ of the resulting solution was injected into the HPLC system. The calibration ranges were $0.5{\sim}5{\mu}g/g$ and calibration curves were linear with coefficients of correlation better than 0.95. The limits of quantification were $0.5{\mu}g/g$ for all muscles. The recoveries of bovine, porcine, chicken, flatfish and japaneseel muscles were 99.8%, 102.4%, 91.0%, 104.0% and 93.0%, respectively. The procedures were validated according to the CODEX guideline, determining specificity, linearity, accuracy, precision, quantitation limit and recovery.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.157-167
• /
• 2006

During the first and second NGIS projects by the Korean government, The first one (1995~2000) was limited on constructing geographic information and the second (2001~2005) was focused on circulation and practical use of geoinformation from the result of the first project. In the latter half of 2nd NGIS project, However, the geographic information from the NGIS projects have not been renewed even though there were significant geographical changes. The accurate renewal of geoinformation is a matter of great importance to the next generation industry (e.g. LBS, Ubiquitous, Telematics). In this respect, it is time to update the geographic information in the latter half of the second NGIS project. Therefore, It is not only important to build an accurate geoinformation but also rapid and correct renewal of the geoinformation. NGII (National Geographic Information Institute) has been studying for improvement of digital map that was constructed by the result of the 1st NGIS project. Through the construction of clean digital map, NGII constructed Framework Data to three kinds of formats (NGI, NDA, NRL). Framework Data was contained to other database, and provided the reference system of location or contents for combining geoinformation. Framework Data is consist of Data Set, Data Model and UFID (Unique Feature Identifier). It will be achieved as national infrastructure data. This paper attempts to explore a method of the update to practical framework data with realtime geoinformation on feature's creation, modification and destruction managed by 'Feature management agency' using UFID's process. Furthermore, it suggests a method which can provide important data in order to plan the Framework update with the land change ratio.

• Design Convergence Study
• /
• v.13 no.2
• /
• pp.143-164
• /
• 2014

In this study, we suggest a tablet-PC based application as an instrument for self-examination of dementia and aim to evaluate its usability for the practical use. The tool for the self-diagnosis of dementia is testing a person's sentence comprehension, which is investigated by the accuracy of a sentence-picture matching task, and the result of the test can differentiate individuals with dementia of Alzheimer's type from normal aging population. According to its use for diagnosis of dementia, we developed a new version of sentence-picture matching task by a cooperative study with NABLE(Neurogenic communication And Brain Lab at Ewha) and applied to the application as a main function. Targeting the New Silver who are preliminary aged people in Korea, this application can provide them with three values: 'self-', 'easy', and 'simple'. When using this application, users can gain these values by an instruction manual with the recorded guide voice, easy-to-use functions and the simplified menu structure of it. After prototyping, we conducted the usability test and it was proved as a result that the New Silver users can easily operate the application by themselves.

• Korean Journal of Culture and Social Issue
• /
• v.24 no.3
• /
• pp.385-410
• /
• 2018

Materialistic values can be a important variable to understand Koreans' psychological well-being and mental health. This study aimed to validate the Korean version of the Material Values Scale (K-MVS)(Richins & Dawson, 1992). In study 1, we performed confirmatory factor analysis(CFA) to ascertain the three factor model of the original MVS using 417 Korean undergraduate student data(sample 1). The CFA confirmed the three-factor model of the MVS. Yet, three items that yielded low factor loadings in this study as well as in other MVS validation studies were excluded from the final model. In study 2, content, construct, and concurrent validity of the K-MVS were examined with 650 undergraduate student data(Sample 2). We also tested measurement invariance across two groups(i.e., college student group of Sample 2 and employee group of Sample 3). The result revealed that the three-factor model of the K-MVS hold true across the two groups. Lastly test-retest reliability was calculated with 408 female college student data(Sample 4) that filled out K-MVS twice within 6 months. These findings suggest that the K-MVS is a reliable and valid measure for assessing materialistic values in Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.950-957
• /
• 2023

For safe mooring and towing between the ship and port, the equipment must be designed in accordance with the relevant international regulations. However, some small shipyards and engineering companies often do not fully comprehend the core contents. Therefore, the international regulations regarding towing and mooring equipment are reviewed and the bollard and chock are newly developed based on the Mooring Equipment Guideline 4 (MEG4) standards. A bollard is a mooring equipment used to fix a mooring rope to the hull. It has two columns and is mostly used in a figure eight pattern knots under the mooring condition. The chock, which is used to change the mooring rope direction coming into the ship from outside, is manufactured using a casting with curvature. The two mooring equipment are widely used in the stern, bow, and mid-side. Owing to the increase in the size of container vessels and LNG ships, the mooring rope load has increased and the safe working load of the mooring equipment must be revised. This study summarizes and examines the results of the allowable stress method obtained using finite element analysis modelling. To consider the mesh size effect, a reasonable criteria was suggested by referring the existing class guidance. Additionally, the safe working load was verified through nonlinear collapse analysis, and the elastic region against load increments was confirmed. Furthermore, the proposed evaluation method can be used to develop similar equipment in the near future.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.887-897
• /
• 2023

Leading waste disposal countries, such as Sweden, Switzerland, and the United Kingdom, conduct safety assessments across all stages of High-Level Radioactive Waste Deep Geological Disposal Facilities-from planning and site selection to construction, operation, closure, and post-closure management. As safety assessments are repeatedly performed at each stage, generating vast amounts of diverse data over extended periods, it is essential to construct a database for safety assessment and establish a data management system. In this study, the safety assessment data management systems of leading countries, were analyzed, categorizing them into 1) input and reference data for safety assessments, 2) guidelines for data management, 3) organizational structures for data management, and 4) computer systems for data management. While each country exhibited differences in specific aspects, commonalities included the classification of safety assessment input data based on disposal system components, the establishment of organizations to supply, use, and manage this data, and the implementation of quality management systems guided by instructions and manuals. These cases highlight the importance of data management systems and document management systems for securing the safety and enhancing the reliability of High-Level Radioactive Waste Disposal Facilities. To achieve this, the classification of input data that can be flexibly and effectively utilized, ensuring the consistency and traceability of input data, and establishing a quality management system for input data and document management are necessary.