Abstract
Friction coefficients of the prestressing tendon are the basic information required to control the prestressing force introduced to PSC structure during jacking. However, the friction coefficients show considerable differences depending on the specifications, causing much confusion to designers. In this study, the ranges of the friction coefficients presented in domestic and foreign specifications are compared together to clarify the differences. Then, a procedure is proposed that can be used to estimate the wobble and curvature friction coefficients from field data such as elongation and prestressing force and from theory related to the friction. The procedure is applied to various tendon profiles of several PSC bridges constructed by ILM, FCM and MSS. The resulting values are compared with those presented in some specifications and assumed in jacking and a reasonable range of the friction coefficient is discussed. Lift-off tests are also performed in some bridges to further verify the results. The resulting wobble friction coefficients are not as small as those presented in AASHTO specifications but range from the lower limit to mid point of domestic specifications, while the curvature friction coefficients approach or slightly exceed the upper limit.
PSC 구조물에 사용되는 긴장재의 마찰계수는 긴장작업시 긴장력 관리를 위한 기본적인 정보가 된다. 그러나, 마찰계수는 국내외 설계기준별로 큰 차이가 있어 실무자들에게 혼란을 주어 왔다. 이 연구에서는 먼저 국내외의 관련 설계기준을 비교 분석하여 현재 통용되고 있는 마찰계수의 범위를 파악해 보았다. 그리고 긴장시의 신장량과 긴장력과 같은 실측값과 마찰계수에 대한 이론식을 조합하여 파상 및 곡률 마찰계수값을 역으로 유추할 수 있는 절차를 제안하였다. 예제로서 ILM, FCM 및 MSS 공법으로 시공된 국내 PSC 교량들을 대상으로 다양한 형상을 가진 텐던들에 제안된 절차를 적용하였다. 이를 통해 계산된 마찰계수값들을 설계기준이나 긴장시 가정되었던 값들과 비교하였으며, 이를 바탕으로 합리적인 마찰계수값의 범위에 대해 논하였다. 이 때 몇몇 교량에서는 lift-off 시험으로 고정단 긴장력을 추가적으로 측정하여 결과를 검증하는데 참조하였다. 파상 마찰계수의 경우 AASHTO 기준만큼 작은 값은 아니지만 국내 기준의 하한값에서 중간값 정도에 분포했다. 한편, 곡률 마찰계수는 국내 기준의 상한값에 가깝거나 이를 다소 상회하는 것으로 나타났다.