• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.707-714
• /
• 2016

Active driving safety systems for vehicle, such as the front collision avoidance, lane departure warning, and lane change assistance, have been popular to be adopted to the compact car. For improving performance and competitive cost, FMCW radar has been researched to adopt a phased array or a multi-beam antenna, and to integrate the front and the side radar. In this paper we propose several efficient methods to implement the signal processing module of FMCW radar system using low cost DSP. The pulse width modulation (PWM) based analog conversion, the approximation of time-eating functions, and the adoption of vector-based computation, etc, are proposed and implemented. The implemented signal processing board shows the real-time performance of 1.4ms pulse repetition interval (PRI) with 1024pt-FFT. In real road we verify the radar performance under real-time constraints of 10Hz update time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.1-7
• /
• 2010

In this paper, the performance of the soft-decision-and-forward (SDF) protocol in the cooperative communication network with one source, one relay, and one destination, where each node has two transmit and receive antennas, is analyzed in terms of the bit error rate (BER) obtained from the pairwise error probability (PEP). For the slow-varying Rayleigh fading channel, the optimal and suboptimal power allocation ratios are determined without feedback. The optimal power allocation can be obtained by minimizing the average PEP. For the tractability, an alternative strategy of maximizing the product SNR of direct and relay links, which we call the suboptimal power allocation, is considered. Through the numerical analysis, we show that the performance gap between the suboptimal and the optimal power allocation is negligible in the high SNR region.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1885-1894
• /
• 2014

There are various high-performance algorithms in the area of the existing VDSs (vehicle detection systems). However, they requires a large amount of computational time-complexity and their systems generally are very expensive and consumes high-power. This paper proposes real-time traffic information detection algorithm that can be applied to low-cost, low-power, and open development platform such as Android. This algorithm uses a vehicle's sub-shadow to set ROI(region of interest) and to count vehicles using a location of the sub-shadow and the vehicle. The proposed algorithm is able to count the vehicles per each roads and each directions separately. The experiment result show that the detection rate for going-up vehicles is 94.1% and that for going-down vehicles is 97.1%. These results are close to or surpasses 95%, the detection rate of commercial loop detectors.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.400-403
• /
• 2021

Algorithms for predicting the optimal route of vehicles are being actively sudied with the recent development of autonomous driving technology. Companies such as SK, Kakao, and Naver provide services that navigate the optimal route. They predicts the optimal path with information from the users in real time. However, they can predict the optimal route, but not optimal lane route. We proposes a system that navigates the optimal lane path with coordinates data from vehicles using Lidar sensor. The proposed method is a system that guides smooth lanes by acquiring time series coordinate data of a vehicle after performing the Lidar-based object detection method. we demonstrates the performance using actual acquired data from the experimental results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.815-825
• /
• 2017

Visibility of lane marking is impaired at night or in the rain, which thereby threatens traffic safety. Recently, various studies and technologies have been developed to improve lane marking visibility, such as the extension of lane marking life expectancy (up to 1.5 times), improvement of lane marking equipment productivity, improvement of lane marking visibility by applying phosphorescent material mixed paint. Cost-benefit analysis was performed with considering various benefit items that can be expected. About 45% of traffic accidents would be prevented by improving lane marking visibility. Additionally, accident reduction benefit and traffic congestion reduction benefit were calculated as much as 246 billion KRW per year and 12 billion KRW per year, respectively, by reducing repaint cycle due to enhanced durability. 45 billion KRW per year is expected to reduced with improved lane detection performance of autonomous vehicle. Meanwhile, total increased cost when introducing phosphorescent material mixed paint to 91,195km of nationwide road is identified as 1922 billion KRW per year. However, economic feasibility could not be secured with 0.16 of cost-benefit ratio when applied to the road network as a whole. In case of "Accident Hot Spot" analyzing section window (400m), one or more fatality or two or more injured (one or more injured in case of less than 2 lanes per direction) per year were caused by pavement marking related accident, economic feasibility was secured. In detail, 3.91 of cost-benefit ratio is estimated with comparison of the installation cost for 5,697 of accident hot spot and accident reduction benefit. Some limitations and future research agenda have also been discussed.

• 전기의세계
• /
• v.46 no.3
• /
• pp.20-25
• /
• 1997

자율주행시스템은 복잡한 환경에서 효과적인 주행을 위해서 센서를 통해 주변의 정보를 수집하고 주변환경에 적절한 동작을 취해야 한다. 이러한 자율주행시스템에 지능적인 방법을 통하여 새롭게 제안한 방법을 서술하였다. 퍼지 논리를 이용하여 운전자와 같이 차량이 차선을 따라 주행하기 위한 퍼지 논리 제어기(FLC)가 설계되었다. 함축적인 차량모델을 기반으로 설계한 퍼지 논리 제어기가 복잡하고 정확한 차량모델을 기반으로 설계된 PID나 FSLQ 제어기와 동등한 성능을 발휘하였다. 인간의 운전방법을 학습할 수 있는 신경회로망을 이용하여 자율주행시스템에 적용하였다. 퍼지 신경회로망은 인간의 제어특성을 반영하도록 설계되었으며 자동으로 생성된 제어기는 퍼지 논리 제어나 신경회로망의 기법보다 우수한 성능을 발휘하였다. 퍼지 논리, 신경회로망, 유전자 알고리즘 등의 인간의 지능 모델에 기초를 둔 방법을 자율주행차량의 제어에 도입하므로써 기존의 자율주행시스템의 문제점을 극복하는데 주요한 역할을 하였다. 앞으로 퍼지 논리, 신경회로망, 유전자 알고리즘은 각각의 강점을 융합하거나, 고전적인 제어 알고리즘과 결합하므로써 더욱 우수한 성능을 발휘할 것으로 예상된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.671-674
• /
• 2018

In this study, we implement a YOLO driving assistance system using a model car. The YOLO is an object detection and recognition algorithm using deep running which is becoming an issue recently. The system alerts the lane departure by applying the image processing technology to the image acquired through the camera, recognizes the objects using the YOLO, and performs various functions according to the type of the object and the distance between the vehicle. the YOLO, which is superior to the existing object detection and recognition algorithm, improves the performance of the driving assist system without additional equipment. The driving assist system using the YOLO will ensure the safety of the driver with low cost.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.117-126
• /
• 2018

PURPOSES : The purpose of this paper is to analyze the change in lane reflection performance through lane washing and sweeping on highway lanes. METHODS : This paper compared and analyzed the changes in lane reflection performance before and after lane washing and sweeping. The research method was as follows. First, we selected four research sites on the Gyeong-bu Highway. Second, the parameters affecting lane reflection performance are classified into luminance, brightness, and number of glass beads. Third, the change in reflection performance was measured after washing /sweeping at the same place after studying 60m of the unwashed/unswept area. Fourth, the measurement results were compared and analyzed before and after lane washing/sweeping. RESULTS : The results of this study are as follows. First, lane washing improved the luminance and brightness by 4.2~21.4% and 1.4~5.1%, respectively, and reduced the number of glass beads per wash by 0.2~1.2%. Second, lane sweeping improved the luminance and brightness by 2.3~8.5% and 0.8~2.3%, respectively, and reduced the number of glass beads per sweep by 0.8~4.9%. CONCLUSIONS : By comparing the results of lane washing and sweeping, it was found that compared to lane sweeping, lane washing improved the luminance and fewer glass beads were dropped.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.181-199
• /
• 2022

This study presented a methodology for evaluating the performance of the lane departure warning system was derived by calculating the relationship between the behavior information of the car and the location of the high-precision map using a high-precision map. The evaluation criteria of the mood and lane departure warning system for the installation of road markings in Korea were analyzed, a high-precision map was constructed to meet the evaluation criteria, and an evaluation system was constructed to verify the proposed methodology. Evaluation of lane departure warning systems using high-precision maps can be quantified and applied to various road environments through accurate location-based comparative analysis and reduced manual post-processing work time to confirm evaluation results.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.93-101
• /
• 2011

The evaluation of various color coating methods for color maintenance of color asphalt pavement is conducted using the laboratory and field tests on the bus lane. The surface of color asphalt constructed on the bus lane is deteriorated such as changing color and decoloration and abrasion due to the passing of the traffic and time. The total of 9 coating methods were evaluated in this study. The laboratory tests included Ultra violet test, adhesion test and Taber abrasion test and the field tests were british pendulum test and visual survey. The results of tests showed that the different methods showed the their own engineering characteristics and it is dependant upon the main material used. The rubber epoxy material for the main material showed the satisfactory result among the methods tested. However, the performance of the coating methods after 100days are not satisfactory, decoloration, abrasion and peeling up are investigated and need to be studied for the further application in the field.