• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.5-10
• /
• 2006

A special finite difference method for nonlinear dynamic response analysis of semi-infinite foundation soil using mapping which transforms semi-infinite domain into finite domain is presented here. For the region of engineering interest, mapping is isometric, and fur far field, shrink mapping which transforms infinite interval into finite interval is adopted. At first, the responses of semi-infinite foundation soil with linear constituting model are computed, and compared with theoretical results and those of existing method. Good agreements are obtained among the results of the proposed method, Lamb's theory and FEM with extensive mesh model. Then the responses of infinite foundation soil are computed by the present method, using small and large mesh model. The results of small and large mesh models agree well with each other, demonstrating the effectiveness of the proposed method.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.4
• /
• pp.11-19
• /
• 1995

In this paper, the Finite Difference Time Domain (FDTD) method is used to analyse the characteristics of the coaxial line transmission coefficent, shielding effectiveness, and compared to results of the moment method. The excitation mode of the Gaussian pulse is assumed to be a TEM-mode instead of the TE or TM-mode and in order to eliminate the reflected wave with in short length of the line. Calculated value of shielding effectiveness of the coaxial line by the FDTD are in good agreement with the results of the moment method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1634-1638
• /
• 2008

하천의 2차원 흐름 해석, 유사이동 해석, 오염확산 해석을 위한 유체의 수치해석법에는 유한요소법, 유한차분법, 유한차분법의 변형인 유한체적법, 경계적분법 등이 있다. 유체에 대한 수치해석 기법으로 전통적으로 가장 많이 사용되고 있는 방법은 유한차분법이지만, 비구조적 요소망(unstructured mesh)을 이용하여 복잡한 형상을 표현하기가 상대적으로 용이한 유한요소법이 다양한 형태의 하천 해석에는 더욱 적합할 것이다. 본 연구에서는 비구조적 요소망을 advanced front method를 이용하여 생성해 보았다. Advanced front method는 해석하고자 하는 영역에 적절한 절점들을 생성한 후 삼각 요소망을 구성하는 grid based advanced front method와 절점들을 생성하지 않고 해석 영역에 삼각 요소를 바로 구성하는 element based advanced front method로 나눌 수 있다. Grid based advanced front method에서 해석 영역에 적절한 절점을 생성하는 방법으로는 일반적인 격자 구조의 절점 생성 방법을 적용하였으며 경계와의 거리가 가까운 절점은 생성되지 않으며, 삼각 요소를 구성할 때에는 두 개의 인접 절점을 비교하여 최적의 삼각 요소를 구성하게 된다. 단 두 개의 인접 절점만을 비교함으로서 비교적 빠른 시간 안에 최적의 삼각 요소망을 구성할 수 있다. 삼각 요소망을 생성한 후에는 Laplacian smoothing을 이용하여 삼각 요소망의 형질을 개선하였다. Element based advanced front method는 외부 경계에서부터 시작된 Front가 내부 영역으로 확대되어지며 각 Front에서 적절한 절점을 직접 생성하여 바로 삼각 요소를 구성하게 된다. Front에서 생성된 절점은 인접 절점들이 있는지 검색하여 인접 절점이 있다면 생성된 절점은 삭제되어지며 인접 절점이 삼각 요소를 위한 나머지 한 점으로 채택되어진다. Front는 외부 경계와 교차되어지지 않아야 하며 또한 연속된 Front를 효율적으로 관리하기 위해 list 자료 구조를 활용하였다.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.97-102
• /
• 2011

본 연구에서는 원형 박판 구조물의 안정성에 대하여 해석 하였다. 임계하중은 하중을 점차적으로 증가하여 구조물이 파괴가 발생하여 안정성을 상실 하는 상태에서 가장 작은 하중을 의미한다. 판구조의 안정성을 임계하중의 크기로 기초를 두고 해석 하였다. 원형 박판구조의 차분해석은 일반 판구조와 같으므로 최근에 많은 연구의 대상이 되어왔다. 차분법은 복잡한 구조물에서도 물론, 다양한 경계조건을 포함하는 문제에 이르기까지 효과적인 수치방법이다. 본 연구에서는 기본 박판구조의 지배방정식을 유도하고 차분화 하여 직접적으로 접근하였다. 원 둘레 의 지점이 힌지 받침으로, 등분포 하중을 받고 있는 박판을 기하학적 비선형 해석으로 수행하여 원형 박판의 처짐 및 응력을 해석 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.2
• /
• pp.197-205
• /
• 1998

The purpose of this paper is to analyze the electromagnetic field characteristics of array antenna with the finite difference-time domain algorithm. Finite difference equations of Maxwell's equations are defined in cylindrical coordinate systems. To simulate the unbounded problem like a free space, the Mur's absorbing boundary condition is also used. After modeling the array antenna with the grid structure, the transient response of the field distribution is depicted in the time domain.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.3 s.36
• /
• pp.451-461
• /
• 1998

The solution of anisotropic plate via the classical methods is limited to relatively load and boundary conditions. If these conditions are more complex, the analysis becomes increasingly tedious and even impossible. For many plate problems of considerable practical interest, analytic solutions to the governing differential equations cannot be found. Among the numerical techniques presently available, the finite difference method and the finite element method are powerful numerical methods. The objective of this paper is to compare with each numerical methods for the buckling load and modes of anisotropic composite laminated plates considering shear deformation. In applying numerical methods to solve differential equations of anisotropic plates, this study uses the finite difference method and the finite element method. In determining the eigenvalue by Finite Difference Method, this paper represent good convergence compared with Finite Element Method. Several numerical examples and buckling modes show the effectiveness of various numerical methods and they will give a guides in deciding minimum buckling load and various mode shapes.

• The Journal of Engineering Geology
• /
• v.11 no.2
• /
• pp.153-161
• /
• 2001

The quantitative evaluation of the stereo graphic projection, the limit equilibrium analysis, the finite difference analysis, the distinct element methocI is a analytical evaluation using many variables. Through the reliability analysis by the point estimation technique, uncertainty of other variables that have an effect on the stability of the rock slo~ was considered. The organized evaluation method of the approximate reasoning concept and using a fuzzy language was developed to confer and analysis the failure factors in planning and constructing the rock slope. Considering the result of the an- alysis, it was demonstrated that stability of entire sections can be evaluated through reliability analysis of point estimation technique. The results of stability evaluation by Fuzzy Approximate Reasoning is generally identical with the results of other existirw; analyses. As mentioned above, general and organized evaluation of special qualities of rock slope is possible using RMR Classification, Stereo Graphic Projection, Limit Equilibriwn Analysis, Finite Difference Analysis, Distinct Element Method, Point Estimation Technique, and Fuzzy Approximate Reasoning.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.3
• /
• pp.24-34
• /
• 2010

This paper analyzed the partial differential equations of laminated composite shells of revolution by using the finite difference method. The proof that numerical results are reasonable and accurate is obtained through converge ratio analysis and commercial program LUSAS for the structural analysis. The purpose of this study is to examine closely the engineering advantages and to analyze the structural behaviors of the anisotropic shells of revolution. Thus, the relevant reinforcement and most suitable arrangement of fiber to produce the highest strength are proposed through the numerical results according to a variety of parameter study. Namely, the distribution of displacements and stress resultants are analyzed according to the change of meridian's curvature, the ratio of height-width of shell, subtended angle, fiber angle, and so on. Using these distribution, the most suitable shell may be proposed to produce the highest strength. Also, the configuration of the entire laminated composite conical shells is analysed, and a variety of the design criterion of circular conical shell are proposed and studied in engineering view points.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.38-44
• /
• 2010

In this paper, the higher order FDTD(Finite-Difference Time-Domain) method is used to obtain the frequency response characteristics of the cylindrical metamaterial slab. FDTD method is one of strongest electromagnetic numerical method which is widely used to analyze the metamaterial structure because of its simplicity and the dispersive FDTD equation which has the dispersive effective dielectric constant and permeability are derived to analyze the metamaterials. This derived dispersive FDTD equation has no errors in analyzing the dielectric materials but there are some time and frequency errors in case of analyzing the metamaterials. We used the higher order FDTD method to obtain the accurate frequency response of the metamaterials. Comparisons between the dispersive FDTD method and the higher order FDTD method are performed in this paper also. From the results, we concluded that more accurate frequency response for various metamaterials applications can be obtained using the proposed method in this paper.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.4
• /
• pp.501-507
• /
• 2007

In the first part of this study, the moving least squares finite difference method for solving solid mechanics problems was formulated. This second part verified the accuracy, robustness and effectiveness of the developed method through several numerical examples. It was shown that the method gives excellent convergence rate for elasticity problem. The solution process of elastic crack problems showed the easiness in discontinuity modeling and demonstrates the accuracy and efficiency in finding singular stress solution based on adaptive node distribution. The applicability to the engineering problem with abrupt change in displacement and stresses gradient fields is verified through a localization band problem. The developed method is expected to be extended to the various special engineering problems.