• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1291-1297
• /
• 2014

This paper proposes integrated chassis control (ICC) with electronic stability control (ESC) and active rear steering (ARS). Direct yaw moment control is used to generate a control yaw moment. A weighted pseudo-inverse-based control allocation (WPCA) method is adopted to distribute the control yaw moment into tire forces, generated by ESC and ARS. Simulation-based tuning of variables weights in the WPCA is used to enhance the yaw moment distribution performance. Simulations using the vehicle simulation software $CarSim^{(R)}$ show that the proposed ICC is effective in improving maneuverability and lateral stability.

• ICROS
• /
• v.19 no.1
• /
• pp.32-48
• /
• 2013

최근 보행자와 차량의 항법 정보(위치, 속도, 자세, 방위각, 등)는 기존의 편의(convenience) 목적의 활용뿐 아니라 안전(safety) 보장을 위한 기반 정보로 활용되고 있으며 이에 대한 원천기술 및 활용기술의 연구개발이 활발하게 이루어지고 있다. 본 고에서는 인프라 기반 및 센서 기반의 다양한 보행자/차량용 항법 기술과 항법용 융합 필터 기술을 설명하고 연구사례를 살펴보고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.12
• /
• pp.997-1003
• /
• 2016

This paper presents an application of adaptive algorithms for yaw moment distribution with electronic stability control (ESC) and active rear steering (ARS) in integrated chassis control (ICC). Integrated chassis control consists of upper- and lower-level controllers. In the upper-level controller, the control yaw moment is computed with sliding mode control required to stabilize a vehicle. In the lower-level controller, adaptive algorithms are applied to determine the required brake pressure of ESC and the necessary steering angle of ARS, in order to generate the control yaw moment. Simulation is performed using the vehicle simulation package CarSim to validate the proposed method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.2
• /
• pp.111-119
• /
• 2017

This paper presents a method to determine the rear steering angle in integrated chassis control with electronic stability control (ESC) and rear wheel steering (RWS). A control yaw moment needed to stabilize a vehicle should be distributed into the tire forces generated by the ESC and RWS. Weighted pseudo-inverse control allocation (WPCA) is adopted to determine the tire forces. Four methods are proposed to calculate the rear wheel steering angle. To validate the proposed methods, a simulation is performed using a vehicle simulation software package, CarSim. The simulation results show that the proposed method for determining the rear wheel steering angle improves the performance of the integrated chassis control.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1429-1436
• /
• 2013

This study presents an approach for designing a vehicle rollover prevention controller using differential game theory and multi-level programming. The rollover prevention problem can be modeled as a non-cooperative zero-sum two-player differential game. A controller as an equilibrium solution of the differential game guarantees the worst-case performance against every possible steering input. To obtain an equilibrium solution to the differential game with a small amount of computational effort, a multi-level programming approach with a relaxation procedure is used. To cope with the loss of maneuverability caused by the active suspension, an electronic stability program (ESP) is adopted. Through simulations, the proposed method is shown to be effective in obtaining an equilibrium solution of the differential game.

• ICROS
• /
• v.15 no.1
• /
• pp.29-36
• /
• 2009

무인차량의 야지 자율주행에 있어서 지형 및 환경 인식기술은 다양한 지형/지물에 대한 인식, 분류 및 융합을 통하여 최종적인 자율주행 및 임무 목적용 인식 맴을 제작하기 위한 기술이다. 병렬기구는 조립, 포장, 기계가공, 크레인, 수중공학, 항공 및 해양구조, 비행 및 3D 시뮬레이션, 위성 접시안테나 위치제어, 망원경 자세제어, 그리고 정형외과 수술 등 여러 분야에 사용되고 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.1
• /
• pp.103-111
• /
• 2016

This paper presents an adaptive variable weights tuning system for an integrated chassis control with electronic stability control (ESC) and active front steering (AFS) for lateral stability enhancement. After calculating the control yaw moment needed to stabilize a vehicle with a controller design method, it is distributed into the tire forces generated by ESC and AFS using weighted pseudo-inverse-based control allocation (WPCA). On a low friction road, lateral stability can deteriorate due to high vehicle speed. To cope with the problem, adaptive tuning rules on variable weights of the WPCA are proposed. To check the effectiveness of the proposed method, a simulation was performed on the vehicle simulation package, CarSim.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.64-69
• /
• 2007

Motion control of the system is a position control of motor. Motion control of an uncertain robot system is considered as one of the most important and fundamental research directions in the robotics. Some distinguished works using linear control, adaptive control, robust control strategies based on computed torque methodology have been reported. However, it is generally recognized within the control community that these strategies suffer from the following problems : the exact robot dynamics are needed and hard to implement, the adaptive control cannot guarantee the performance during the transient period for adaptation under the variation, the robust control algorithms such as the sliding mode control need information on the bounds of the possible uncertainty and disturbance. And it produces a large control input as well. In this dissertation, a motion control for the unmanned intelligent robot system using disturbance observer is studied. This system is affected with an impact vibration disturbance. This paper describes a stable motion control of the system with the consideration of external disturbance. To obtain the stable motion independently against the external disturbance, the disturbance rejection is strongly required. To address the above issue, this paper presents a Disturbance OBserver(DOB) control algorithm. The validity of the suggested DOB robust control scheme is confirmed by several computer simulation results. And the experiments with a motor system is performed to give the validity of applicability in the industrial field. This results make the easier implementation of the controller possible in the field.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.3
• /
• pp.251-260
• /
• 2009

Hybrid locomotive UGV with actively articulated legs along with wheeled ends has high traversability to travel over rough terrain. The behavior control method was usually adapted for the controlling of the suspension configuration which determines the traversability of the UGV. In this study, we are proposing a method of configuration planning of the legs without any detail geometric data about the terrain. The terrain was estimated by the traces of each wheel and the leg configurations for the desired posture of the vehicle were set up against the constraints of the terrain. Also, an optimal leg configuration was calculated based on the quasi-static stability and power consumption, and plans for the leg behavior were made. Validity of the proposed method was checked by simulations using some off-the-shelf programs, and showed that the orientation control without geometric features of terrains and simplification of the behavior planning for obstacle negotiation were possible.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.180-189
• /
• 2014

For a autonomous parking of unmanned car, this paper proposes a posture regulation algorithm of a car-like mobile robot, which is supported by a docking formation and a feedback linearization control law. Unlike the previous researches based on a path-planning and optimization algorithms, the autonomous car implemented the proposed autonomous parking algorithm can be parked without much computational burden and a high performance processor. Stability of the proposed docking formation and feedback linearization control law are analyzed and performance of the proposed algorithm is shown by implementing to the simulations with six scenarios and an actual car in the experiment place.