• Journal of the Korean Society for Railway
• /
• v.19 no.6
• /
• pp.802-814
• /
• 2016

This study examines the relationship between the operational turnaround time and the rolling stock requirements. In this study, the operational turnaround time of rolling stock is divided into physical turnback time and waiting time. This paper presents a variety of models and estimation results of the existing studies on operational turnaround time. The proposed estimation model of the operational turnaround time in this study is designed to minimize the operational turnaround time in terminus stations, while the rolling stock requirement is reduced. The developed estimation model was applied in a real-world example, and it was found that the operational turnaround time and the required rolling stocks were lessened compared with the current condition. The method presented in this paper is expected to be utilized in train operational planning and rolling stock routing plans, thereby minimizing the rolling stock requirements of existing railway operating authorities.

• Journal of the military operations research society of Korea
• /
• v.34 no.2
• /
• pp.143-162
• /
• 2008

This paper aims to formulate the method of estimating the wartime stockpile requirement of 155mm self-propelled artillery including intelligent ammunition for armored vehicles, currently being developed. The usual method of utilizing war-game simulation results in considerable margins in expected occupancy ratio between ground forces and air forces for each weapon system for armored vehicles. Also, the method tends to produce excessive output greater than the minimal stockpile requirements; therefore, the study aims to overcome limitations like these by the allocation method for each weapon system according to targets. This allocation method is better than war-game simulation method.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.779-793
• /
• 2019

The ventilation rate (Qreq) requirement in road tunnels is not just a basic information for determining the tunnel cross-sectional area, but also a major factor for the ventilation system selection. The Qreq is predominantly dependent on the vehicle traffic volume, while among others, the vehicle exhaust emissions and permissible standards are critical. This paper analyzes the changes in the Qreq designing criteria and/or recommendations suggested by World Road Association and local authorities over the last 20 years, since the first local designing criteria was established in 1997 by Korea Expressway Corporation. Additionally, based on the updated vehicle emission standards of Ministry of Environment and recent recommendations of the World Road Association (WRA), changes in the Qreq and its effects are studied in terms of the length and grade of the tunnel.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.409-420
• /
• 2017

The amount of ventilation required in making the tunnel ventilation plan is an important factor for determining the capacity of the ventilation system. The amount of pollutant emission for each type of vehicle (basic emission amount for the design of ventilation volume) for estimating the required ventilation amount is based on the 'Standard for Allowing the Emission for the car manufacturing', proposed by Ministry of Environment. However, in 2013, the Ministry of Environment announced the 'Regulations on the calculation method of total emissions from vehicles' as a regulation for calculating the pollutants emitted from vehicles. In this regulation, there are the 'Emission factors for each type of vehicle'. Therefore, it is necessary to review the application of the Regulation to the estimation of the required ventilation volume for the road tunnel. In this study, the influence of the strengthened emission regulation in 2015 caused by the case of manipulation of emission volume for the diesel vehicle on the calculation of the required ventilation volume in the road tunnel has been checked. In addition, in this study, the required ventilation volume calculated according to the Standard for Allowing the Emission for the car manufacturing revised by Ministry of Environment and "Emission factors for each type of vehicle" and that calculated according to the EURO emission standard were compared for analysis. This study has implications that it provides the basic design data for calculating the reasonable ventilation capacity of the ventilation system based on the ground for calculating the required ventilation volume.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.191-198
• /
• 2009

There are almost no studies on verification of requirements for high speed rolling stocks by means of RAM goals and on setting RAM goals by means of verification on practical reliability, availability and maintainability for high speed rolling stocks though they are covered in specification of an order that RAM goals asked of rolling stocks are shown for gaining high quality of them and availability when they are in operation. This study is for estimating number of high speed train-sets that would be supplementarily placed an order through verification of RAM goals of a project for the introduction of KTX-II 100 cars. It verify that optimized requirements for high speed rolling stocks by relatively comparison with between requirements for train-sets through setting RAM goals and requirements for train-sets through analysis of prospects for management balance with high speed rolling stocks.

• 전기의세계
• /
• v.44 no.9
• /
• pp.38-42
• /
• 1995

최근 산업 발달과 더불어 증가하는 운송 물량과 일일 생활권의 확대 및 생활 수준의 향상으로 인해, 빠르고 편리하며 안전한 양질의 운송수단에 대한 요구가 점차 높아지고 있다. 이러한 요구의 증대는 자동차와 같은 개별적 운송수단의 증대를 유발하였으며, 기존의 제한된 도로에 대한 운송수단의 점유율을 증가시켰다. 그 결과, 운송소요시간이 불규칙해져 평균수송량이 감소했으며 이로 인해 운송효율이 급격히 저하되었다. 따라서 많은 양의 물량을 한 번에 수송할 수 있으며, 정확한 운송시간을 보장하는 철도차량과 같은 운송수단의 확대가 절실하게 되었다. 도심 내에서는 전기 철도차량인 지하철을 설치하여 점증하는 수요를 충족시켜 왔으며, 도심간에는 기존의 궤도를 이용하는 차량의 운송횟수를 늘려 운송량을 증가시켜 왔다. 그러나 최근, 계속된 수요의 증가로 인해 기존 방식의 철도차량 운송 능력도 포화상태에 이르게 되었다. 이에 따라 기존의 제한된 선로에서 운송량을 향상시키기 위한 연구와 함께 새로운 철도노선 확장 및 차량의 고속화를 위한 연구가 활발히 진행되고 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12A
• /
• pp.1843-1851
• /
• 2000

ITU-R 권고안을 토대로 미래 IMT-2000 무선망에서의 소요 서비스 채널수 및 지상계 주파수 요구량을 분석한다. IMT-2000 가입자가 요구하는 서비스를 크게 회선과 패킷교환 서비스로 분류하고 옥내, 보행자 및 차량용의 가입자 이용 환경을 고려한다. 본 논문에서는 2010년경 각종 IMT-2000 서비스에 대한 시장성과 무선 전송 기술의 파라미터 값을 이용하여 가입자의 기준 트래픽과 셀내 발생 트래픽을 계산하고 필요한 무선 채널수 및 소요 주파수를 산출한다. 또한, ITU-R에서 권고한 기준 트래픽을 바탕으로 서로 다른 가입자 수와 트래픽 분포 및 이용 환경에서 필요한 무선 채널수와 소요 주파수를 산출하며, 채널수와 주파수 요구량에 대한 패킷 서비스 지연시간의 민감도를 분석한다.

• Tunnel and Underground Space
• /
• v.13 no.3
• /
• pp.235-243
• /
• 2003

Recent worldwide trends show that tunnel length is getting longer, and the demand for longitudinal ventilation system with jet-fans in highway tunnels has also increased mainly due to the economic reasons. Improvements in vehicle engine subsequently reduced required ventilation rate(Qreq) which is the decisive factor in choosing the optimal ventilation system. Qreq contour map is a graph that defines the relationship among tunnel length, grade and required ventilation rate. It is important to understand the variation of Qreq in order to evaluate the characteristics of ventilation system with jet fans. Therefore this study aims at studying a graphical method for determining the characteristics of jet-fm ventilation system using Qreq contour map. Also, this study focuses on traffic composition on local highways.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.3
• /
• pp.309-321
• /
• 2007

Since the first diesel passenger car hit the local road in late 2005, the share of diesel cars is growing significantly; possibly up to the level as in the western Europe. In this study, the effects of introduction of diesel passenger cars on the ventilation rate and facility capacity are analyzed for the three individual cases with different basic exhaust rate based on the vehicle age, the vehicle class percentage and the smoke exhaust rate. The target tunnel for this comparative study is a typical 2 km-long 2-lane highway tunnel. Case 1 assuming the current local design standards and the diesel vehicles comprising 40% of the total passenger cars on the road required more ventilation rate and facility capacity than in the case only with the current standards. Case 2 which is the real tunnel currently in the designing stage taking into account the vehicle age but ignoring the diesel vehicle ratio, and Case 3 on the contrary considering the both factors show similar level of ventilation characteristics as EURO-3 emission regulation. Application of the emission standard set by the Ministry of Environment for newly manufactured vehicles in the current local tunnel design standard indicates higher requirements than for EURO-2 regulation, whereas the emission standard came into effect in 2006 results in the ventilation characteristics similar to EURO-4. This study aims at providing fundamental information for assessing the basic emission rate and determining the optimal ventilation rate and facility capacity considering the growing percentage of diesel cars and gradually decreasing level of smoke emission forced by the relevant laws.

• Proceedings of the KOR-KST Conference
• /
• 2002.02a
• /
• pp.45-77
• /
• 2002

교통혼잡 문제가 점점 심각해짐에 따라 대중교통의 중요성은 날로 부각되며, 대중교통을 지원하기 위한 정책들이 속속 입안되고 있어 대중교통을 심도 있게 분석할 수 있는 틀의 개발은 필연적이라 할 수 있다. 이에 본 연구는 대중교통 통행배정모형 개발과 대중교통 기종점통행량(OD) 추정을 목적으로 수행되었다. 대중교통 통행배정모형의 개발부분에서는 기존의 대중교통 통행배정모형이 개별차량과 다른 대중교통의 특성을 정확히 반영하고 있지 못하다는 한계를 극복하고자, 최적경로 탐색에는 유전자 알고리즘(Genetic Algorithm)을 통행량 배정에는 로짓모형을 기반으로 한 확률적 통행량 배정모형(Stochastic Network Loading Model)을 이용하여 TATSN 모형을 개발하였다. 그리고, 대중교통 기종점통행량의 추정은 전통적인 기종점통행량 추정 방법인 기종점조사 방법이 시간과 비용이 과대하게 소요된다는 단점을 인식하여 관측통행량을 이용하여 추정하는 방법을 제안하였다.