• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제47권12호
• /
• pp.881-889
• /
• 2019

The pre-swirl system is the device that minimizes energy loss of turbine cooling airflow from the stationary parts into rotating parts. In this paper, an off-design analysis was conducted for the ambient air temperature and turbine load conditions. The discharge coefficient was constant for ambient air temperature and turbine load. However, adiabatic effectiveness was increased. This is due to the volume flow rate. The volume flow rate was increased at higher ambient temperature and higher turbine load. It means that the volume of cooling air was increased and the cooling performance of the air was improved. Consequently, adiabatic effectiveness increased by 30.46% at 100% turbine load compared to 20% turbine load. And increased by 18.42% at 55℃ ambient air temperature compared to -20℃ ambient air temperature.

• Aerospace Engineering and Technology
• /
• 제10권1호
• /
• pp.54-62
• /
• 2011

The pressurant mass required for propellant tank pressurization with operating condition variation was estimated by using the numerical model already developed for this purpose. The model was applied to the concept design results of KSLV-II first stage oxygen tank. The supplied pressurant temperature, oxygen volumetric flow rate, and the ratio of length to diameter of the tank were selected as variables. The required pressurant mass and mass flow rate, collapse factor, ullage temperature distribution were predicted, and the results showed that the pressurant temperature had the largest effect on the amount of the required pressurant mass. The pressurizing efficiency of the propellant tank was calculated through analyzing energy distribution in the ullage. It was found that the gas-to-wall heat transfer in the ullage was dominant, and much of the pressurant energy was lost to tank wall heating.

• Bulletin of the Society of Naval Architects of Korea
• /
• 제26권1호
• /
• pp.39-45
• /
• 1989

Many mechanical systems including ships and/or offshore structures have poor dynamic response characteristics such as undesirable natural frequencies and undesirable mode shapes. It is mandatory to redesign the structure. In this paper a procedure for the dynamic redesign of an undamped structural system is presented. The method which uses a penalty function with a penalty term containing error in equilibrium for a given vibration mode may have a shortcoming. This method includes unconstrained eigenvector degrees of freedom as unknowns. In the work developed here, only constrained mode shape changes are used in the solution procedure, resulting in a reduction of the unnecessary calculations. Among the set of equations which characterizes the redesign of the structural systems, the under constrained problem is discussed here and formulated as an optimization problem, with an optimal criterion such as minimum change or minimum structural weight of the system. Four simple numerical applications illustrate the efficiency of the method. The method can be applied to the vibration problems of ships and/or offshore structures with an implementation of the commercial FE codes.

• Korean Journal of Food Science and Technology
• /
• 제28권3호
• /
• pp.421-427
• /
• 1996

Ethyl carbamate is an animal carcinogen and a suspected human carcinogen found in fermented foods and beverages. For the determination of ethyl carbamate in typical Korean diet, an analytical method was established for the food as complex as Kimchi. Kimchi samples collected from various locations in the country were homogenized and extracted four times with ethyl acelate. Following concentration and reconstitution with water, the extract was loaded onto $C_{18}$ column. Fraction containing ethyl carbamate was eluted with methanol, while most of the red pigment of the sample was retained on the column. The eluent was further purified with alumina, followed by Florisil column. The final eluent was analyzed by gas chromatography mass spectrometry in the selected ion monitoring mode. None of the twenty Kimchi samples showed ethyl carbamate level higher than 4.6 ppb without correction for the recovery. The concentration of ethyl carbamate in Kimchi increased as pH decreased, suggesting fermentation dependent formation of ethyl carbamate.

• The Journal of the Korea Contents Association
• /
• 제12권6호
• /
• pp.21-31
• /
• 2012

The virtual reality consists of a virtual space constructed similar to the reality and agents residing in it. Our virtual space refers to an orderly space that is governed by such physical properties as mass, gravity, friction, and associated rules on top of the usual visual rendering. To construct this virtual world we are to develop virtual agents behaving like humans and the environment surrounding them. In order to improve the existing reactive agents designed to act to their designers' dictation in predetermined space or memory into autonomous agents, we need diverse kinds of knowledge among others related to the spaces for the agents to act in. Our design and implementation focuses on the spatial knowledge among those diverse aspects of knowledge required. The developed knowledge representation scheme is used on a basis for realistic and efficient physical cyber-environment, and as the knowledge structure to simulate the virtual agents' knowledges on spaces.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제30권3호
• /
• pp.334-339
• /
• 1997

The feasibility of foam separation to remove solid produced from fish culture water was investigated. Performance characteristics of foam separator were highly dependent upon the operating parameters which were superficial air velocity, Hydraulic retention time (HRT), and foam height. About $50\%$ of the total protein contained in a sample of fish culture water could be removed by foam separator. The removal efficiencies of protein, T-N, TA, and solid components were increased with increasing superficial air velocity and HRT. The combined effects of these operational variables show that removal rates of TVS increase with increasing superficial air velocity and HRT, and decrease as foam height goes up. It could be confirmed that foam separator might offer good perspective for removal of harmful components such as TA and TVS in aquacultural recirculating water.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.481-484
• /
• 2008

Recently, the recycling and reusing of construction and demolition waste concrete is urgently required because waste concrete is greatly increased according to the rapid increasing of urban redevelopment project, but the problem solution for demand and supply unbalance of fine aggregate is urgently required because of the restriction of collecting sea fine aggregate. So the utilization of high quality recycled fine aggregate using construction and demolition waste concrete as new fine aggregate for construction industry is urgently. Accordingly, In this study, As recycled fine aggregate manufacturing technology with exceeding in economical efficiency, reduction efficiency of environmental load and quality improvement effect of recycled fine aggregate, it is to develop dry manufacturing system composed specific gravity separator of high-speed rotation impact type and centrifugal Force Powder Collector, etc. And it is to examine mechanism of recycled sand dry manufacturing system.

• Journal of Navigation and Port Research
• /
• 제36권5호
• /
• pp.379-385
• /
• 2012

In this paper, the stability and stabilization problems for marine vessels including surface and underwater vehicles are described. In the marine vessels, there are many and strong nonlinear parameters. These give hard design process and difficulties to us. In this article, at first we make a descriptor system representation as a controlled system to preserve the physical parameters of the system as it is. And we propose a new stability and stabilizability conditions based on the quadratic stabilization approach which gives a solution for the unreasonable problems produced by added mass. That is, the proposed conditions are not interfered with the nonsymmetric matrix constraint. And the stability condition is given by an matrix inequality such that it makes us to obtain a solution easily for something.

• Resources Recycling
• /
• 제16권6호
• /
• pp.46-51
• /
• 2007

This study aimed at developing high-efficiency RDF(refuse derived fuels) fuel in order to use RDF energy rationally and to recycle industrial product. As most studies in this area are concentrated in large combustion apparatuses such as kilns, but this study was focused on the small-sized heating systems, applying them directly to grate type boiler which has a heating capacity of $66{\sim}132m^2$. The different kinds of fuel are experimented including RDF. Coke and Waste Tire. First, for this, we experimented and analyzed RDF to see the change in its mass and heating value. Also, four kinds of exhaust gas are sampled by gas analyzer including CO, $CO_2$, NO and $NO_2$ at different temperature. As a result, the levels of CO concentration of RDF are higher than these of coke and waste tire. But, the levels of NO, $CO_2$ and $SO_2$ concentration of RDF and coke were lower then the levels when waste tire is burned.

• Journal of the Korean Chemical Society
• /
• 제36권6호
• /
• pp.832-839
• /
• 1992

Lead has been determined by Resonance Ionization Mass Spectrometry (RIMS) through one-color-two-photon ionization, two-color-two-photon ionization and three-color-three-photon ionization in a vacuum chamber equipped with Time-of-Flight(TOF) mass spectrometer. In all cases, the first excited state chosen was 6p7s($^3P_1$) state and the transition was at 283.3 nm in wavelength from the ground state. By using various concentrations of lead standard solutions, the calibration curve is obtained in the range of 0.1 ${\mu}g$ to 1.0 pg in both ionization schemes. The detection limit was estimated as 20 pg for the two-color ionization, while 10 pg for the three-color ionization experiment.