A Comparative Experiment on the Emission Gas Characteristics of Domestic RDF

국내산(國內産) RDF의 배출(排出)가스 특성(特性) 비교실험(比較實驗)

  • Park, Myung-Ho (Dept. of Mechanical Eng. Kangwon National University)
  • 박명호 (강원대학교 기계공학과)
  • Published : 2007.12.27

Abstract

This study aimed at developing high-efficiency RDF(refuse derived fuels) fuel in order to use RDF energy rationally and to recycle industrial product. As most studies in this area are concentrated in large combustion apparatuses such as kilns, but this study was focused on the small-sized heating systems, applying them directly to grate type boiler which has a heating capacity of $66{\sim}132m^2$. The different kinds of fuel are experimented including RDF. Coke and Waste Tire. First, for this, we experimented and analyzed RDF to see the change in its mass and heating value. Also, four kinds of exhaust gas are sampled by gas analyzer including CO, $CO_2$, NO and $NO_2$ at different temperature. As a result, the levels of CO concentration of RDF are higher than these of coke and waste tire. But, the levels of NO, $CO_2$ and $SO_2$ concentration of RDF and coke were lower then the levels when waste tire is burned.

본 연구는 에너지의 합리적 이용 및 산업폐기물의 재활용을 위하여 고효율 폐기물 고형연료의 개발을 목표로 하였다. 이 분야의 대부분의 연구는 킬른과 같은 대형연소장치에 집중하여 연구가 이루어졌기 때문에 본 연구에서는 화격자연소방식인 열용량 $66{\sim}132m^2$ 규모의 소용량 열시스템에 초점을 맞추었다. 실험은 RDF, 코크스 및 폐타이어 3종류의 연료를 이용하여 질량값 및 열량값의 변화를 측정하였으며 CO, $CO_2$, NO, $NO_2$ 등의 연소가스 분석 실험을 수행하였다. 연소가스분석결과 RDF의 CO 농도값은 코크스와 폐타이어보다 높았으며. RDF 및 코크스의 NO, $CO_2$, $SO_2$의 농도값은 폐타이어보다는 낮은 값을 나타내었다.

Keywords

References

  1. 이송우, 최연석, 2002 : '도시고형폐기물(MSW)로 제조한 RDF의 열분해 특성', 대한환경공학회 논문집, pp.197-199
  2. 소현조, 유명선 외 6인, 2003 : '무한주행식 화격자형 소형보일러에서의 RDF 연소재 발생특성에 관한 연구', 한국폐기물학회지 논문집, pp.393-403
  3. 엄태인, 류창국, 2003 : '유동해석과 연소실험을 이용한 이동 화격자식 RDF 연소로 설계', 대한환경공학회 논문집 , pp.480-485
  4. 鍵谷 司, 1994 : 'こみシ固形燃料に關する調査硏究シリズ(6)', 環境の計劃, 5(3), pp.26
  5. 신병철, 이조영, 최형욱, 2002 : '폐기물 고형연료(RDF)의 활용방안 및 전망', 고분자과학과 기술, 13(3), pp.307-314
  6. 최연석, 김석준 외 3인, 2000 : '폐기물 고형연료(RDF)를 활용한 화력발전사업 타당성 연구', 한국폐기물학회 논문집 , 18(4), pp.69-79
  7. Namba, K. et al., 1998 : 'Journal of the Japan Society of Waste Management Expects', 6(7), pp.302
  8. 日本機械學會, 1995 : '燃燒工學ハンドブック', 丸善株式社, 東京, 日本, pp.100-102