• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.5 s.57
• /
• pp.109-120
• /
• 2009

This paper introduces a new method to estimate the loss of prestressing force for the externally prestressing tendon. The proposed method that combines of HGA and FEM is able to identify the lost tensile force of a externally prestressed tendon. The identification variables of the proposed method is a exteranlly prestressed tendon of tension, effective nominal diameter, mass per unit length and Rayleigh damping coefficients. First of all, a finite element model system is constructed to consider the effect of damping, and these variables are identified using inverse analysis technique - updating algorithm. Finally, throughout total 3 cases of numerical tests, the numerical propriety of the proposed method is verified. Here, it is seen that the errors in the estimated variables by the proposed method are about 1% except in the case of Rayleigh damping coefficients.

• Journal of Conservation Science
• /
• v.31 no.3
• /
• pp.299-308
• /
• 2015

Aim of this study is to identify dyestuff of the Dallryeong(official's robe in Joseon Dynasty, 16th century) excavated from Yuryang-dong, Cheonan, in 1996. For this purpose, extracted dyestuffs from Dallryeong fabric and from natural dyestuffs for red color(safflower, Sapanwood, Madder) which are presumed to have been used in the Dallryeong, are analyzed and compared by high performance liquid chromatography(HPLC). As a result, HPLC chromatogram of extracts of the Dallryeong's dyestuff and safflower are showed a peak at 17.5 minutes. The UV/Vis spectra of the samples are showed the maximum absorption wavelength at 519nm. This result is identical with the analysis of the previous studies on red dyestuff of safflower. In addition, the analysis of Mass Spectrometry(MS) showed the identical result of the peak with m/z 910. Following these results, excavated pink Dallryeong were considered to have been dyed with safflower.

• 대한공업교육학회지
• /
• v.32 no.2
• /
• pp.171-187
• /
• 2007

The purpose of this study is to measure the lathe tool vibration and verify its usefulness using the fiber optic interferometeric sensor instead of using common accelerometer. To compare two vibration signals a Fabry-Perot fiber optic sensor(FOS) is directly attached to the left-side surface of the lathe tool and an accelerometer is attached near to the fiber optic sensor. Measurement signals from the FOS and theoretical results of receptance simulation are compared. When the amplitude of tool vibration increased the frequency shift phenomena was occurred. This means that mass effect occurred and vibration spectrum moved to the low frequency region. Generally this results is agreement to the regenerative chatter. The chatter frequency is not same as the natural frequency of the tool itself. The FOS can also applied to laboratory experiments for students. This experimental technique is perhaps the first attempts because of directly attachment technique. Therefore, suggested Fabry-Perot fiber optic sensor can be used to monitoring the tool wear and vibration.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.12
• /
• pp.1243-1249
• /
• 2012

Finite element models are updated in two stages in this paper. In the first stage, damping is neglected, and mass and stiffness matrices of a finite element model are updated using an optimization technique. The objective function for optimization consists of natural frequencies and mode shapes obtained from experimental modal testing data and finite element analysis. In the second stage, damping is considered with the mass and stiffness matrices fixed. A damping matrix is estimated assuming a proportional damping system. Then the damping matrix is adjusted using an optimization process so that the difference between the analytical and measured frequency response functions becomes minimum. This procedure of model updating has been applied to a simulated system and an experimental cantilever beam.

• Journal of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.320-326
• /
• 1986

The antitumor properities of metal are not limited to Pt(II) complexes. Recently, it was reported that some Pt(II) and Pd(II) complexes with sulfur and nitrogen ligands had potential antitumor reactivity. Pt(II) complexes is toxic drug for anticancer. Therefore, the complexes of Pd(II) with adenine, uracil, cytosine and malonate ligands are interesting for anticancer drug. We synthesized new palladium complexes containing nucleosides. The reactions of Pd(II) with adenine, uracil, cytosine and malonate ligands have been studied in aqueous solutions. The complexes isolated from these reactions have the following formulas; $[Pd(en)(C_5H_5N_5)_2](NO_3)_2,\;[Pd(en)(C_4H_3N_2O_2)Cl],\;[Pd(en)(C_3H_2O_4)]\;and\;[Pd(en)(C_4H_5N_3O)_2](NO_3)_2{\cdot}(C_4H_5N_3O)$. The compounds have been identified by elemental analysis, mass spectra, infrared spectra and electronic spectra.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.4
• /
• pp.236-243
• /
• 2013

Offshore wind turbines has to be proved against accidental events such as ship collision. In this study, ship collision fragility analysis of offshore wind turbine is done. Dynamic collision analysis is accomplished by considering soil foundation interaction and fluid structure interaction. Uncertainties due to ship weight and speed, angle are also considered. By analyzing dynamic response of offshore wind turbine, fragility curves are obtained for different damage levels. They can be used for restricting boat speed around the wind turbine and allowable size of the boat for inspection and for other purposes. Results of the fragility, it was confirmed fragility of collision speed of bulk ship of 30,000DWT and 850ton barge ship.

• Korean Journal of Remote Sensing
• /
• v.20 no.6
• /
• pp.419-425
• /
• 2004

This study has proposed a data fusion method based on the Dempster-Shafer evidence theory The Dempster-Shafer fusion uses mass functions obtained under the assumption of class-independent Gaussian assumption. In the Dempster-Shafer approach, uncertainty is represented by 'belief interval' equal to the difference between the values of 'belief' function and 'plausibility' function which measure imprecision and uncertainty By utilizing the Dempster-Shafer scheme to fuse the data from multiple sensors, the results of classification can be improved. It can make the users consider the regions with mixed classes in a training process. In most practices, it is hard to find the regions with a pure class. In this study, the proposed method has applied to the KOMPSAT-EOC panchromatic image and LANDSAT ETM+ NDVI data acquired over Yongin/Nuengpyung. area of Kyunggi-do. The results show that it has potential of effective data fusion for multiple sensor imagery.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.6
• /
• pp.466-473
• /
• 2018

This paper presents an estimation method for the static configuration of a steel lazy wave riser (SLWR) using the dynamic relaxation method applied to estimate the configuration of structures with strong geometric non-linearity. The lumped mass model is introduced to reflect the flexible structural characteristics of the riser. In the lumped mass model, the tensions, shear forces, buoyancy, self-weights, and seabed reaction forces at nodal points are considered in order to find the static configuration of the SLWR. The dynamic relaxation method using a viscous damping formulation is applied to the static configuration analysis. Fictitious masses are defined at nodal points using the sum of the largest direct stiffness values of nodal points to ensure the numerical stability. Various case studies were performed according to the bending stiffness and size of the buoyancy module using the dynamic relaxation method. OrcaFlex was employed to validate the accuracy of the developed numerical method.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.4
• /
• pp.214-224
• /
• 2022

It is necessary to estimate manoeuvring characteristics of submerged bodies at the design stage in order to ensure the safe operations. In this study, added mass coefficients in the mathematical model of submerged bodies are estimated by captive model tests and numerical calculations. Two kinds of models, MARIN 'BB2'submarine model and AUV (Autonomous unmanned vehicle) model are utilized in the forced oscillation tests. Compared to BB2 submarine, AUV with cylindrical type hull form shows relatively small added masses in roll, pitch, and yaw directions. Next, numerical calculations based on potential theory are performed under the assumption that viscous effects on inertia forces are negligible. Added masses obtained by numerical calculations are in good agreements with forced oscillation test results. And if slow manoeuvres of submerged bodies are presumed, some of velocity coupled terms can be approximated by combinations of added mass coefficients.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.638-647
• /
• 2021

Organic residues are substances derived from diverse natural sources. Recent scientific analysis of organic residues has yielded important information in restoring the lifestyles of ancient peoples. In this study, the organic material contained within the celadon oil bottle of the Goryeo dynasty, excavated from the Soejoul site in Geumneung-dong, Chungju, was analyzed using Fourier-transform infrared spectroscopy (FT-IR) and gas chromatograph-mass spectrometer (GC-MS). The results showed that the organic materials in the bottle were plant-derived oils. In particular, polyunsaturated fatty acids and phytosterols were detected using GC-MS analysis. Sesamin components were also identified. Sesamin, which is a characteristic component of sesame seeds, is a lignan and an antioxidant. As the organic residues in the oil bottle were derived from sesame seeds, it is presumed that sesame oil was stored in the bottle.