• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.242-242
• /
• 2016

낙동강 하류구간인 남강합류점에서 낙동강하구둑까지는 하상경사가 약 1/10,000보다 작은 매우 완만한 경사를 이루고 있으므로 홍수기 고수위를 장시간 유지하는 등 홍수소통에 불리한 조건을 가지고 있다. 이처럼 하상경사가 매우 완만한 하천에서는 홍수파의 전파 특성이 하상경사, 수심경사, 그리고 이송가속도와 국부가속도 경사 등 운동량 방정식의 각 항 모두에 영향을 크게 받는 것으로 알려져 있다. 따라서, 낙동강 하류구간의 홍수분석 정확도 개선을 위해서는 대상구간에 유입하는 홍수수문량의 크기 및 변화를 정확히 반영하는 것이 무엇보다 중요하다. 하천 본류로 유입하는 지류의 홍수량을 산정하는 보편적인 방법은 지류 하류의 수위관측소에서 구축된 수위-유량관계곡선을 이용하는 것이다. 그러나 본류 수위의 배수영향을 받는 지류 하류 구간에서는 단일 수위-유량관계의 결정이 불가능하므로 지류 유출량 산정을 위한 새로운 방법이 필요하다. 본 연구에서는 낙동강 하류구간(창녕 함안보~낙동강하구둑) 유역면적의 약 45% 이상을 차지하는 밀양강 유역의 홍수기 유출량 산정을 위하여 HPG(Hydraulic Performance Graph)를 이용하였다. HPG는 배수영향을 받아 시시각각 수리특성이 변화하는 구간에서도 유량 및 상하류 수위 등 수리특성 추정에 합리적인 결과를 제공하는 것으로 알려져 있다. 2012년 태풍 산바 사상을 대상으로 HPG를 이용하여 산정한 밀양강 홍수량과 기존 수위-유량관계로 산정한 홍수량을 각각 경계조건으로 사용한 경우로 구분하여, 낙동강 하류구간 주요 지점인 삼랑진과 구포의 홍수위 예측 정확도를 비교하였다. 비교결과, 기존 방법과 HPG를 이용한 방법 모두 예측시점이 첨두발생 시각에 가까워질수록 평균오차가 감소하는 것으로 분석되었다. 그러나 기존 방법은 예측시점에 따라 평균오차의 변화가 단조롭지 않고 진동이 발생한 반면, HPG를 이용한 방법은 기존 방법보다 오차의 감소가 단조롭고 지속적인 것으로 나타났으며 평균오차 또한 작았다. 본 연구결과, 배수영향을 받는 지류 하류구간에서 HPG를 이용한 유입량 산정은 본류 홍수위 예측 정확도 개선을 위한 경제적인 대안이 될 것으로 판단된다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.1
• /
• pp.80-88
• /
• 2018

The function of a vehicle holding device (VHD) is to securely hold a launch vehicle on the launch pad and release the launch vehicle at maximum thrust after engine ignition to allow lift-off of the launch vehicle. During the release of the launch vehicle, to prevent the Ka doing a doing a doing mode, which is the vertical oscillation of the entire liquid propellant, the release of the launch vehicle should be gradual. In this study, for the gradual release of a launch vehicle, a hydraulic system comprising an accumulator and pyro valve to operate a hydraulic cylinder and control the speed of the cylinder with an orifice is introduced. Through a test, the influence of design variables on the cylinder speed is analyzed. Based on this, the design values of the hydraulic cylinder are determined. Through this study, the engineering basis for developing a VHD releasing a launch vehicle at maximum thrust is provided.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.129-134
• /
• 1994

A Laser Cutter is designed for the precise fabrications in the shipyards recently. The cutter is a gantry type one with specified functions of movability and strength in order to satisfy the workability. The gantry frame should move with a certain velocity in a relatively short time for the proper cutting of the object materials. The gantry is fitted with ball screw and the acceleration field is formed by actuating this ball screw. The relative displacement should be within the allowable design criteria to make sure the precise cutting of the materials by the laser. In this paper, modal and structural analysis for a Laser Cutter which is commonly used in the shipyards, is carried out to check the design criteria of the system. The system is modeled by placing the proper shell and soils finite elements and fictitious mass properties to represent the real one. The way how to extract the loading conditions based on the given velocity criteria of the system is presented. Static structural analysis is performed and the results came out as expected. Modal analysis for finding eigen-values and mode shapes of the system is performed and it is shown that the time dependent dynamic analysis is unnecessary for this system for its operating circumstances.

• Physical Therapy Korea
• /
• v.26 no.1
• /
• pp.19-27
• /
• 2019

Background: Compared to healthy people, patients with chronic lower back pain have reduced balance abilities which may cause proprioception problems, patients with chronic lower back pain avoid physical activities due to pain, and reduced activity levels lead to muscle weakening, which can further exacerbate pain. Recently, there have been many studies on the use of sensory stimulation; and among these studies, interventions that use vibrational stimulation have shown functional improvements in the patients. Objects: This study examined the effects of a stabilization exercise with vibration stimulation on the balance ability and disability in patients with chronic back pain. Methods: The subjects of the study were 30 persons who were randomly assigned to the experimental group and the control group, with 15 subjects in each. The subjects were evaluated before and after intervention via a balance ability test, the Korean Oswestry disability index (KODI) test, a pain test, and a proprioceptive sensory test. Both groups received general physical therapy. The experimental group performed the stabilization exercise with vibration stimulation, and the control group performed a general stabilization exercise, three times a week for six weeks. Results: After the intervention, both groups showed significant improvements in the balance ability test, the KODI test, the pain test, and the proprioceptive sensory test. The experimental group showed statistically significant, higher improvements than the control group in the balance ability test, the KODI test, and the proprioceptive sensory test. Conclusions: The stabilization exercise with vibration stimulation for patients with chronic back pain has been reported to provide greater functional improvements than the conventional intervention method. Therefore, the stabilization exercise in a vibration stimulation environment could be a useful intervention for patients with chronic back pain.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.2
• /
• pp.39-47
• /
• 2019

Purpose : This study was investigated effects of vibration on scapular winging of knee push-up plus exercise. Methods : Twenty-eight female subjects with scapular winging were evaluated after performing knee push-up plus exercise, with or without vibration, three times a week for four weeks. Muscle activation of the serratus anterior and upper trapezius, and the ratio of activation of the upper trapezius to serratus anterior were measured using surface EMG; and scapular winging length was measured by using the caliper. Results : The findings showed that knee push-up plus exercise -with and without- vibration induced a significant increase in muscle activation of serratus anterior (p<.05) and a significant decrease in muscle activation of the upper trapezius (p<.05), the ratio of muscle activation of the upper trapezius to the serratus anterior (p<.05) and scapular winging length (p<.05). There was also a significant difference in muscle activation of the serratus anterior (p<.05) and upper trapezius (p<.05) between control and experimental group at post-test. Conclusion : This study suggests positive clinical effects of knee push-up plus exercise with vibration which enhanced muscle activation of serratus anterior and reduced muscle activation of upper trapezius in person with scapular winging. However, vibration had no effectiveness to improve muscle imbalance between serratus anterior and upper trapezius, and reduce the scapular winging length.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.4
• /
• pp.191-200
• /
• 2021

Purpose : Chronic ankle instability can lead to problems in balance and gait due to weakness of the ankle muscles and decreased proprioceptive sensation. Balance training that stimulates proprioceptors is necessary to improve ankle stability. We aimed to compare the effects of unstable support balance exercises using whole body sonic vibration and an aero-step (TOGU) on proprioception and balance in individuals with unilateral functional ankle instability. Methods : Thirty-six participants with unilateral functional ankle instability were randomly recruited and divided into two groups (group 1 = sonic whole body vibration, group 2= TOGU). Individuals in each group participated in training for 5 weeks, 40 minutes per session, 5 times per week, and performed weight-bearing exercises in five postures on different unstable support surfaces. Proprioception was measured by digital inclinometer (Dualer IQ), and balance was measured by force platform (Biodex balance system). Results : Significant differences were observed in proprioception before and after intervention within both group (p<.05). Significant differences were also observed in the balance index before and after intervention within both groups (p<.05). Conclusion : As a result of this study, it is suggested that for individuals with ankle instability, unstable support surface training using a whole body sonic vibrator and TOGU can have a positive effects on proprioception and balance ability.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.129-134
• /
• 2021

A power tool is a tool used to manufacture and process various structures using a motor that is a power source. Using a motor that uses electricity as a power source, a reduction device, power transmission and conversion device functions are built-in to make the tool rotate, reciprocate, and vibrate. It is a work tool designed to assist the user's movement skills. In the case of Korea, the power tool industry has a short history and is lagging behind advanced countries such as Germany, the United States, and Japan in terms of technology level, market share, and recognition. In addition, electric drivers used in Korea are foreign products from the US and European countries, and the domestic market also prefers 100% foreign companies, and multinational companies are investing a lot in the domestic market. Therefore, technological development must follow in order to develop domestic technology and secure a consistently high market share. The purpose of this thesis is to design a motor driver with high output performance of motor performance, miniaturization, and high speed in accordance with the basic performance requirements of power tools, and finally research developments that can be applied to industrial and medical applications.

• Reproductive and Developmental Biology
• /
• v.29 no.1
• /
• pp.25-30
• /
• 2005

This study was carried out to investigate the effects of semen characteristics, frozen-thawed sperm viability and serum FSH, LH, estradiol-17β and testosterone concentrations between breeds and among seasons in boars. In all seasons, Yorkshire boars produced higher semen volume compared with Duroc boars, whereas sperm concentration did not differ significantly between Duroc and Yorkshire boars. Semen volume in spring was higher compared with summer, autumn and winter in both Duroc and Yorkshire boars, but sperm concentration did not differ significantly among seasons. Sperm motility and normal acrosome rate of frozen-thawed sperm produced in spring were higher than those in summer, autumn and winter in both Duroc and Yorkshire boars. Sperm motility of frozen-thawed sperm in Yorkshire boars was higher than that in Duroc boars regardless of seasons. However, normal acrosome rate did not differ significantly between Duroc and Yorkshire boars. Serum FSH concentration in Yorkshire boars was lower than that in Duroc boars in all seasons. However, there were no significant differences on serum FSH concentration of Duroc and Yorkshire boars among seasons. Serum LH and estradiol-17β concentrations did not differ significantly between Duroc and Yorkshire boars. Also, there were no significant differences in serum LH and estradiol-17β concentrations of Duroc and Yorkshire boars among seasons. Serum testosterone concentration in Yorkshire boars was higher than that in Duroc boars in all seasons. In both breeds, serum testosterone concentrations were higher in spring than in summer, autumn and winter. In conclusion, when serum FSH concentrations were low, semen volumes were high, and when serum testosterone concentrations were high, sperm motility and normal acrosome rate of frozen-thawed sperm were high.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.4
• /
• pp.806-814
• /
• 1997

The incidence, type and distribution of polyneuropathy in patients with chronic obstructive pulmonary disease (COPD) were assessed and also analyzed the causative factors. Forty-four patients, mean age 66.1 years (42 male, 2 female), have been investigated with arterial gas analysis, pulmonary function test, clinical and electrodiagnostic studies. None of them had conditions known to affect the peripheral nervous system such as metabolic disorders or drugs. In a selected group of 44 patients, electrophysiological findings of polyneuropathy were found in 22 patients(50%), clinical polyneuropathy were diagnosed in 13 patients(9 patients were diagnosed by electrophysiological studies, 4 patients were normal by electrophysiological studies). These findings indicate that subclinical polyneuropathy(13 patients, 30%) more commonly occurs than clinical polyneuropathy(9 patients, 20%) in associated with COPD. In the patients with polyneuropathy, the lesions were predominant axonal degeneration, the changes were more involved in leg than arm, more frequently affected sensory fibers. We could not find etiologic factor to cause polyneuropathy in COPD patients.

• Investigative Magnetic Resonance Imaging
• /
• v.12 no.2
• /
• pp.123-130
• /
• 2008

Purpose : Motion effects in parallel magnetic resonance imaging (MRI) are investigated. Parallel MRI is known to be robust to motion due to its reduced acquisition time. However, if there are some involuntary motions such as heart or respiratory motions involved during the acquisition of the parallel MRI, motion artifacts would be even worse than those in conventional (non-parallel) MRI. In this paper, we defined several types of motions, and their effects in parallel MRI are investigated in comparisons with conventional MRI. Materials and Methods : In order to investigate motion effects in parallel MRI, 5 types of motions are considered. Type-1 and 2 are periodic motions with different amplitudes and periods. Type-3 and 4 are segment-based linear motions, where they are stationary during the segment. Type-5 is a uniform random motion. For the simulation, Cartesian and spiral grid based parallel and non-parallel (conventional) MRI are used. Results : Based on the motions defined, moving artifacts in the parallel and non-parallel MRI are investigated. From the simulation, non-parallel MRI shows smaller root mean square error (RMSE) values than the parallel MRI for the periodic (type-1 and 2) motions. Parallel MRI shows less motion artifacts for linear(type-3 and 4) motions where motions are reduced with shorter acquisition time. Similar motion artifacts are observed for the random motion (type-5). Conclusion : In this paper, we simulate the motion effects in parallel MRI. Parallel MRI is effective in the reduction of motion artifacts when motion is reduced by the shorter acquisition time. However, conventional MRI shows better image quality than the parallel MRI when fast periodic motions are involved.