Abstract
The function of a vehicle holding device (VHD) is to securely hold a launch vehicle on the launch pad and release the launch vehicle at maximum thrust after engine ignition to allow lift-off of the launch vehicle. During the release of the launch vehicle, to prevent the Ka doing a doing a doing mode, which is the vertical oscillation of the entire liquid propellant, the release of the launch vehicle should be gradual. In this study, for the gradual release of a launch vehicle, a hydraulic system comprising an accumulator and pyro valve to operate a hydraulic cylinder and control the speed of the cylinder with an orifice is introduced. Through a test, the influence of design variables on the cylinder speed is analyzed. Based on this, the design values of the hydraulic cylinder are determined. Through this study, the engineering basis for developing a VHD releasing a launch vehicle at maximum thrust is provided.
한국형 발사체 지상고정 장치는 발사체 이륙시 엔진 최대 추력에서 고정을 해제 한다. 고정력을 일시에 제거하면 추진체가 탱크 내부에서 상하로 진동하는 Ka Doing a Doing a Doing Mode를 유발할 수 있으므로, 점진적으로 고정력을 제거하는 기능이 필요하다. 본 연구에서는 이를 만족하기 위해 축압기 및 파이로 밸브로 유압구동기를 작동하고 구동기내 오리피스로 속도를 제어하는 지상고정장치 유압시스템의 작동 시험을 수행하였다. 주요 설계변수 변화 의한 유압구동기 운동속도의 영향을 분석하여 이를 바탕으로 구동기 요구속도를 만족시킬 수 있는 유압구동기 설계값들을 도출하였다. 이를 통하여 최대추력에서 동작할 수 있는 발사체 지상고정 장치의 개발을 위한 공학적 기반을 마련하였다.