• Current Industrial and Technological Trends in Aerospace
• /
• v.4 no.1
• /
• pp.34-43
• /
• 2006

헬기는 비행에 필요한 추력, 모멘트 및 조종력을 회전하는 로터시스템에서 발생시키기 때문에 근본적으로 진동이 많이 생기는 항공기이다. 로터시스템의 회전에 의해 발생되는 진동소스를 제어함으로써 헬기 동체에 전달되는 진동을 감소시키고자 하는 연구들이 지금까지 수많이 진행되었다. 이러한 연구들을 크게 두 가지로 분류하면, 수동적 진동제어 방법과 능동적 진동제어 방법으로 나눌 수 있다. 수동적 진동제어 방법은 그간 오랫동안 연구되어 현재 운용 헬기에 실제적으로 적용되고 있으나 능동적 진동제어 방법은 최근까지 활발한 연구가 진행되고 있는 상태이다. 본 논문의 서론에서는 헬기 진동제어를 위한 일반적인 방법에 대한 개요를 소개하였다. 본문은 로터시스템 진동제어 기술 중 최근까지 연구가 진행되고 있는 능동적 진동제어 방법을 중심으로 기술하였다. 특히 최근 비행시험에 성공하여 거의 실용화 단계에 이르고 있는 PZT를 이용한 Trailing Edge Flap 기술, Active Twist Rotor 등을 중점적으로 소개하였다. 마지막으로 유로콥터 BK117의 ADASYS 로터 시스템 성공사례 및 향후 해결해야 할 기술적 제한사항 등을 간략하게 기술하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.536-539
• /
• 2009

BIRDI(Bridge Inspection Robot Development Interface)에서 현재 개발된 첨단굴절로봇차는 비전 시스템과 로봇 플랫폼을 붐에 장착하여 교량 하부를 점검하는 점검용차량이다. 본 연구에서는 첨단굴절로봇차의 포스트 붐에 엑츄에이터를 장착하여 강풍 등으로 발생이 예상되는 유해 진동을 제어할 수 있는 시스템을 제안하였으며, 성능 평가를 위해 수치적 연구를 수행하였다. 제안된 제어시스템의 수치적 연구를 위해 현재 제작된 포스트 붐과 작업 붐의 제원을 이용하여 모델링 하였으며, 적절한 주파수 특성을 가진 하중을 가정하였으며, 최적 제어이론인 PD제어기법인 피드백 제어기법을 적용하여 수치해석을 수행 하였다. 수치해석 결과, 제안된 제어시스템은 L형 붐에 발생되는 유해 진동을 저감시킴을 확인하였다. 본 연구를 통해 제안된 시스템의 진동제어 성능을 입증하였으며, 실제 첨단굴절로봇차에 적용될 경우 점검 시스템의 성능을 향상시킬 수 있을 것으로 사료된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.99-100
• /
• 2016

드론이나 이동형 촬영장비에 장착된 카메라로부터 깨끗하고 안정된 영상을 획득하기 위해서는 짐벌시스템의 안정화기 설계가 필요하다. 짐벌시스템은 카메라 모듈을 지지하는 구조와 외부로 부터의 진동을 차단하면서 정확한 각도를 추종하는 안정화기로 구성된다. 이동형 촬영장비나, 비행중인 드론에는 매우 다양한 주파수 성분의 진동이 발생되는데, 이러한 진동을 제어하기 위하여 6자유도 운동방정식을 유도하고, 이 중에서 본 논문에서는 일반적으로 rolling, pitching, yawing 운동에 대해서는 PID 제어기를 사용하여 안정화를 제어하기만, 카메라종류나 짐벌시스템 구조가 바뀔 때 마다 PID 파라미터를 변경해야 되는 경우가 빈번하다. 본 논문에서는 이런 문제점을 개선하기 새로이 제기된 제어 기법인 지적 PID(intelligent PID) 제어를 통하여 진동제어를 수행하여 짐벌시스템의 안정화를 위한 제어기법을 제안하고자 한다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.4
• /
• pp.87-94
• /
• 1998

Increasing flexibility and lightness of recently built high-rise buildings make the structures susceptible to loads such as earthquakes and winds. Therefore, higher performance vibration control systems to reduce the vibration levels are demanded more than any time in the past. One of the typical active vibration control systems is the active mass driver (AMD). In this paper, an active vibration control system consisting of small shaking table, building model, sensors, signal processing board and AMD is constructed. The dynamic characteristics of these individual systems are investigated through the experimental study. The performance of the active vibration control system is verified through the El Centro earthquake(1940,NS) on the building model.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.2
• /
• pp.65-74
• /
• 2012

This paper aimed at the development of a unified wireless control system in order to control various forms of vibration of bridges. This unified wireless control system unified all different systems each of which functioned for difference purpose such as measurement, analysis, judgement, and control of data acquired from the movement of structure. It was designed to control structures with feedback which was returned according to each different situation after analyzing various signals measured about the structure. In this system, every information in each step from measurement to control was wirelessly transmitted to its central system so that a manager was able to effectively monitor the whole process. Just for the case when any system control need to intervene occurred, a graph user interface was designed for better access. In order to evaluate its basic performance, an experiment was carried out to see how signal input and output were done by comparing its results with those of a wired system. On the basis of the experiment, a vibration control experiment was performed on a model of cable-stayed bridge to see if the unified wireless control system worked well in realtime. This was carried out under four conditions, and the graph and quantitative result under each condition were compared each other. All experiments proved that the unified wireless control system functioned as well as the wired one in terms of its basic performance and vibration control.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.557-563
• /
• 2007

Rain-wind induced cable vibration can cause serious problems in cable-stayed bridge. External dampers attached to the cables have become widely accepted as an effective means for stay-cable vibration suppression. For very long stay-cables, however, such damper systems are rendered ineffective, as the dampers need be attached near the end of cables for aesthetic reasons. A recent study by the authors proposed that a movable anchorage system is replaced direct fixed support of the cable with a support through a bearing and damper. This paper extends the previous work by adding active control system to mitigate the cable vibration. The response of a cable with the proposed active control system is obtained and then compared to those of the cable with and without an external passive damper. The results show that the active control system can provide superior protection than the passive control system for a cable vibration.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.5
• /
• pp.421-427
• /
• 2008

A robot crane truck is developed by the Bridge Inspection Robot Development Interface(BRIDI) for an automated and/or teleoperated bridge inspection. This crane truck looks similar to the conventional bucket crane, but is much smaller in size and light-weight. At the end of the telescoping boom which is 12m long, a robot platform is mounted which allows the operator to scan the bridge structure under the deck trough the camera. Boom vibration induced by wind and deck movement can cause serious problems in this scanning system. This paper presents a control system to mitigate such vibration of the robot boom. In the proposed control system, an actuator is installed at the end of the working boom. This control system is studied using a mathematical model analysis with LQ control algorithm and a scaled model test in the laboratory. The study indicates that the proposed system is efficient for the vibration control of the robot booms, thereby demonstrating its immediate applicability in the field.

• Journal of KSNVE
• /
• v.8 no.2
• /
• pp.313-323
• /
• 1998

This paper addresses a sliding mode control of vibration in a flexible structure using ER(electro-rheological) dampers. A clamped-clamped flexible structure system supported by two short columns is considered. Three ER dampers to be operated in shear mode are designed on the basis of Bingham model of the arabic gum-based ER fluid, and attached to the flexible beam structure. After deriving the governing equation of motion and associated boundary conditions, a sliding mode controller is formulated to effectively suppress the vibration of the beam structure caused by sinusoidal and random excitations. In the formulation of the controller, parameter variations such as natural frequency deviation are treated to take into account the robustness of control system. The effectiveness of the proposed control system is confirmed by both simulation and experimental results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.963-972
• /
• 2002

선박 거주구는 승무원 및 여객들이 상주하는 곳으로서 대형 상선의 경우 주선체 상부에 건물형태의 높은 구조이므로, 선박의 불균형력과 프로펠러 기진력으로 인해 주 선체와 연성되어 진동이 발생한다. 대형상선의 거주구는 육상구조물과는 달리 주선체와 마찬가지로 강성은 일정하나 화물적재량의 변화에 따라 선박 거주구의 유효질량이 변화함으로 가변적인 진동특성을 갖는 구조물 중의 하나이다. 본 연구에서는 가변 동특성을 갖는 대형상선의 거주구 진동을 수동형 및 능동형 흡진장치를 통하여 제어할 경우 거주구의 고유진동수 변화에 따른 제어성능의 변화를 반영할 수 있으면서도 제어성능과 안정성이 뛰어난 강건제어 시스템의 설계 가능성을 수치 시뮬레이션을 통하여 확인하고자 하였다. 적용대상은 진동문제가 많이 발생하는 컨테이너 운반선과 초대형 원유운반선의 거주구 진동특성을 3차원 유한 요소법을 이용하여 검토하고, 실험적인 방법으로는 거주구 형태의 구조물의 질량변화에 대한 동조형 흡진기의 제어성능을 시험과 선형이차 진동제어 장치의 진동제어성능 실험결과를 소개하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5A
• /
• pp.881-885
• /
• 2006

Rain-wind induced cable vibration can cause serious problems in cable-stayed bridges. Externally attached dampers have been used to provide an effective means to suppress the vibration of relatively short stay-cables. For very long stay-cables, however, such damper systems are rendered ineffective, as the dampers need to be attached near the end of cables for aesthetic reasons. This paper investigates a new control system to mitigate the cable vibration. The proposed control system which consists of a laminated rubber bearing and an internal damper may be installed inside of the cable anchorage. A simple analytical model of the cable-damper system is developed first based on the taut string representation of the cable. The response of a cable with the proposed control system is obtained and then compared to those of the cable with and without an external passive damper. The proposed stay-cable vibration control system is shown to perform better than the optimal passive viscous damper, thereby demonstrating its applicability in large cable-stayed bridges for mitigation of rain-wind induced vibration of stay-cables.