• 한국소음진동공학회논문집
• /
• 제19권7호
• /
• pp.673-678
• /
• 2009

The efficiency of active sonar that is used underwater observation equipment is important for obtain the information of topography and trace for the objects. Sound wave transmitted from sonar are distorted by acoustic window which is to protect sonar. Making various sonar dome is impossible for experiment, because consumed unnecessary time and expense. So, the purpose of this study is to simulate and analyze the acoustic window propagated sound wave from sonar for designing model reduced insertion loss. Simulation is performed by transient analysis and fluid-structure interaction analysis. As a result, this study will give a opportunity for efficient design of sonar dome without high cost and time consumption.

• 한국소음진동공학회논문집
• /
• 제21권3호
• /
• pp.206-211
• /
• 2011

In this paper, we report a high-precision wireless gap sensor based on a surface acoustic wave (SAW) device. The sensing element is a parallel-plate capacitor whose dimensions are $3{\times}3\;mm^2$, and is attached to the SAW device as an external load. The SAW device, equipped with an RF antenna, serves simultaneously as a signal conditioner and an RF transponder. The center frequency of the SAW device is 450 MHz. The wireless gap sensor prototype exhibits a resolution of 100 nm and a sensing range of $50{\mu}m$. The proposed sensor system can be used for remote, high-precision gap measurement in hard-to-reach environments.

• 한국소음진동공학회논문집
• /
• 제21권3호
• /
• pp.199-205
• /
• 2011

This paper proposes a framework to predict the mechanical fault of hot rolling mill system (HRMS). The optimum process of HRMS is usually identified by the rotating velocity of working roll. Therefore, observing the velocity of working roll is relevant to early know the HRMS condition. In this paper, we propose the framework which consists of two methods namely spectrum matrix which related to case-based fast Fourier transform(FFT) analysis, and three dimensional condition monitoring based on novel visualization. Validation of the proposed method has been conducted using vibration data acquired from HRMS by accelerometer sensors. The acquired data was also tested by developed software referred as hot rolling mill facility analysis module. The result is plausible and promising, and the developed software will be enhanced to be capable in prediction of remaining useful life of HRMS.

• 한국소음진동공학회논문집
• /
• 제24권9호
• /
• pp.675-681
• /
• 2014

This paper proposes a fault diagnosis system for an induction motor. This system uses empirical mode decomposition(EMD) to extract fault signatures and multi-layer perceptron(MLP) neural network to facilitate an accurate fault diagnosis. EMD can not only decompose a signal adaptively but also provide intrinsic mode functions(IMFs) containing natural oscillatory modes of the signal. However, every IMF does not represent fault signature, an IMF selection algorithm based on harmonics and their energy of each IMF is proposed. The selected IMFs are utilized for fault classification using MLP and this system shows approximately 98 % diagnosis accuracy for the fault vibration signal of the induction motor.

• 방송과미디어
• /
• 제14권2호
• /
• pp.113-122
• /
• 2009

RoSE(representation of sensory effects)기술은 A/V미디어에서 제공하는 시청각 효과 이외에 바람/향기/진동 등의 실감효과를 팬/발향기/진동의자 등의 다양한 디바이스와 연동시킴으로써 미디어의 실감효과를 극대화하는 기술이다. 2007년 10월 82차 MPEG회의에 처음 제안된 RoSE프레임워크는 SE(sensory effects), USP(user sensory preferences), SDC(sensory device capabilities), SDCom(sensory device commands)의 표준아이템이 상호 연동하는 시스템 구조를 갖는다. 지난 2월 87차 MPEG로잔(Lausanne)미팅에서는 이들을 현실과 가상을 연결하는 인터페이스 표준을 정하는 MPEG-V(ISO/IEC 23005) 프로젝트의 Part 2(control information)와 Part 3(sensory information)으로 분리 배치하고 오는 7월 89차 런던 미팅에서 CD(committee drait)를 목표로 표준화를 진행하고 있다. 본 논문에서는 XML에 기반한 이들 4개의 표준 아이템 구성을 살펴보고 현재까지 MPEG 에서 진행되어 온 RoSE표준화 과정을 소개한다.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.179-184
• /
• 2002

In this study, we developed a portable device which can monitor and analyze vibration signals from machines. This system consists a PDA loading the program for vibration analysis and A/D board for vibration acquisition. A PDA is smaller than the palm of the hand, but it has a powerful computing ability as much as an IBM compatible PC with a Pentium 100MHz CPU. The A/D board developed in this study supports LAN interface using TCP/IP communication protocol. The application program for vibration analysis includes signal processing module, fault diagnosis module, data store module, and plot display module. MS visual embedded C＋＋ 3.0 was used to developed the program.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.462-465
• /
• 2009

Cellulose based electro-active paper (EAPap) is a new smart material that has a potential to be used in biomimetic actuator and sensor. Beside of the natural abundance, cellulose EAPap is fascinating with its biodegradability, lightweight, high mechanical strength and low actuation voltage. An actuating mechanism of EAPap is revealed to be the combination of ion migration effect and piezoelectricity. EAPap can generate the electrical current and voltage when the mechanical stress applied due to its electro-mechanical characteristics. In this paper, we investigated the feasibility of EAPap as a mechanical strain sensor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.253-256
• /
• 1997

In this study, we developed a portable device which monitors and analyzes a vibration signal happened to machines. This device is based on PDA which is smaller thant a palm of the hand, but it has powerful computing ability as much s a computer with 100MHz CPU and an operating system called Windows CE. As a preprocess for a diagnosis of a rotating machine, training artificial neural network based on PC is performed, and the device will diagnose the condition of a rotating machine using weight values as a result of the training ANN.

• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1182-1194
• /
• 2004

This paper addresses the application of an active magnetic bearing (AMB) system to levitate the elevation axis of an electro-optical sight mounted on a moving vehicle. In this type of system, it is desirable to retain the elevation axis in an air-gap between magnetic bearing stators while the vehicle is moving. To eliminate disturbance responses, a disturbance observer based sliding mode control is developed. This control can decouple disturbance observation dynamics from sliding mode dynamics and preserves the robustness of the sliding control. The sliding surfaces are designed in the consideration of scattering of received image. The proposed control is applied to a 2-DOF active magnetic bearing system subject to base motion. Along with experimental results, the feasibility of the proposed technique is illustrated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.821-825
• /
• 2008

Requirements of wireless sensor are increasing in machine condition monitoring. But, the limitation of battery power, self-power wireless sensor is necessary for the purpose of stand-alone operation. To overcome this problem, energy harvester is developed by the vibration energy. The purpose of this study is to develop a high efficiency energy harvester with high precision tuning.