• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.98-103
• /
• 2002

초음파 비가진 시인 상용분무와 초음파가진 시인 개질분무, 간접진동분무, 간접진동 및 개질의 겸용분무의 네가지 경우 모두에서 분무액적의 평균직경 및 SMD가 전 영역에 걸쳐서 노즐 글에서 분무방향으로 멀어질수록 조금씩 증가했으며, 또한 초음파 비 가진시인 상용분무 경우가 초음파 가진 세경우에 비해 크게 나타났다. 초음파 가진 세가지 경우에서는 간접진동 및 개질법 겸용의 경우에서 분무액적의 미세화가 가장 우세하게 나타났다. 이는 초음파가 분무 축방향 전영역에 걸쳐서 분무액적의 미세화에 친화적임을 입증한다. 나. 분무 방향 축에서 반경 방향으로 갈수록 분무 액적의 평균 직경과 SMD는 감소하고 있으며, 반경방향 전 영역에 걸쳐서 상용 분무시의 액적이 가장 크게, 초음파겸용 경우에서 가장 작게 나타나고 있다. 이는 초음파가 분무 내부 전 영역에 걸쳐 액적의 미세화에 친화적임을 증명한다. 다. 분무액적의 크기에 따른 분무 분포도 비교에서 네가지 경우 모두에서 축 방향 거리가 멀수록 분무액적의 크기가 다소 증가함을 보였고, 축에서 반경 방향으로는 분무액적의 크기가 다소 감소함을 보이고 있다. 상용 분무와 초음파 분무의 비교에서 초음파 겸용 가진시는 상용 분무 때 보다 분무 영역 전반에 걸쳐서 미세화가 뚜렷이 우세함을 보였다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.349-354
• /
• 2002

쌀 소비량은 생활 수준 향상과 외식 및 식품 산업의 발달로 감소하고, 고품질 쌀을 요구하는 성향이 높아지고 있다. 현재, 고품질 쌀을 생산할 수 있는 기술과 제반 요건은 구비되어 있으나, 수확 후 건조·저장 중에 쌀의 품질이 저하된다. 특히 건조 중 품질 저하는 고온건조에 의한 동할 발생 및 과건조가 주요 원인이다. 이를 해결하기 위해 원적외선 건조 시스템에 관한 연구가 진행 중이다. 본 연구에서는 방사율이 높고, 접착성 및 내열성 등이 강한 곡물 건조기용 방사체 코팅원료를 개발하고, 이 원료를 원적외선 방사체에 코팅한 후 방사체의 형태와 크기에 따라 표면 온도 분포 및 연료 소비량 등을 측정 분석하여 방사체의 특성과 적정 조건을 규명하고자 하였다. 연구 결과를 요약하면 다음과 같다. (1) 세라믹 코팅 원료의 배합비는 세라믹분말 40%와 결합재 60%가 접착력과 가열경화 후 표면이 양호한 것으로 나타났다. (2) 노즐의 유량 및 분무각에 따른 버너의 화염길이 및 폭은 노즐유량이 증가함에 따라 증가하는 경향을 나타내었다. (3) 방사체 위치별 표면온도편차는 방사체 길이가 1350mm인 것이 작은 것으로 나타났고, 열풍유동관 직경이 Rounding type의 경우 76.3mm, Right angle type의 경우 89.1mm일 때 표면 온도편차가 적었다. (4) 연료소비량은 열 풍유동관 직경이 클수록, 방사체 길이가 길수록 증가하는 경향을 나타내었고, Right angle type이 Rounding type에 비하여 연료소비량이 약간 높은 것으로 나타났다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.4
• /
• pp.301-307
• /
• 2015

The diameter of a proton beam emanating from the MC-50 cyclotron is about 2-3 mm with Gaussian distribution. This widely irradiated proton beam is not suitable for semiconductor etching, precise positioning, and micromachining, which require a small spot. In this study, a beam cutting method using a microhole is proposed as an economical alternative. We produced a microhole with aspect ratio, average diameter, and thickness of 428, $21{\mu}m$, and 9 mm, respectively, for cutting the proton beam. By using this high-aspect-ratio microhole, we conducted machinability tests on microstructures with sizes of tens of ${\mu}m$. Additionally, the results of simulation using GEANT4 and those of the actual experiment were compared and analyzed. The outcome confirmed the possibility of implementing a micro process technology for the fabrication of three-dimensional microstructures of 20 micron units using the MC-50 cyclotron with the microhole.

• Journal of Korea Water Resources Association
• /
• v.37 no.4
• /
• pp.293-304
• /
• 2004

Sedimentation basin plays an important role in urban water treatment, and there are many complicated phenomena which need to be understood for efficient design and control of it. Especially, the study on the improvement of settling efficiency is required. In this study, commercial CFD (Computational Fluid Dynamics) program, FLUENT, and particle tracking method were used to simulate the flow in sedimentation basin, and to predict the settling efficiency. Computational domain of real scale was made, and detail factors such as porous wall, and outlet trough were considered instead of being simplified. The simulation results were compared with the experimental data to calibrate the parameters of particle tracking method. Sensitivity analysis showed that the particle diameter had more significant effects on settling efficiency than the particle density. The computation results gave the best agreements with the experimental data, when the value of particle diameter was 26.5 ${\mu}{\textrm}{m}$.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.5
• /
• pp.127-134
• /
• 2004

Rammed Aggregate Pier (RAP) has extensive applicability as for a foundation of structures. In this study, bearing capacity of the reinforced ground by RAP and the failure behavior of RAP are investigated through experiments. RAPs with diameters of 45, 60, 70 mm were installed in sand, of which relative densities are 60, 70, 90%. Then, two columns of pressure gauges, near the RAPs and one diameter off from the center of piers, are installed 5, 10, 15, 20, 25, 30 cm from the surface of the ground. The test results show that maximum lateral earth pressure is observed near 5∼10 cm (1.0∼2.0D) from the surface, which indicates the occurrence of bulging failure type. In addition, deformation of RAP in radial direction increases with lower relative density of the ground. Furthermore, lateral stress distribution decreases with depth.

• Journal of Korean Society of Forest Science
• /
• v.90 no.2
• /
• pp.210-216
• /
• 2001

Pinus densiflora S. et Z. has widely been distributed, and is one of the important main foret resources in Korea. Diameter and height growth patterns were estimated using non-linear algebraic difference equation, which requires two-measurement times $T_1$ and $T_2$. To maximize data use, all possible measurement interval data were derived using Lag and Put statements in the SAS. In results, of the algebraic difference equations applied, the Schumacher and the Gompertz polymorphic equations for diameter and height, respectively showed the higher precision of the fitting. In order to allow more precise estimation of growth than those of the basic Schumacher and the Gompertz, further refinement that combine biological realism as input into the equation would be necessary.

• Journal of Korean Society of Forest Science
• /
• v.105 no.3
• /
• pp.336-341
• /
• 2016

The object of this study was to classify the local types in relation to regional differences using Height-DBH growth of Pinus densiflora in Korea. The regional types were clustered according to Getis-Ord's $G_i$ among Local indicators of spatial association (LISA) by characteristics of spatial distribution which were calculated the residual of sample plots by fitting Height-DBH growth model using Weibull growth equation. Accordingly, Pinus densiflora were classified 3 groups, It indicated that annual precipitation had one of the biggest impacts among the considered site and climate factors. This results can become the standard for regional management of Pinus densiflora forests.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.309-316
• /
• 1999

A numerical study for the turbulent reacting flow in an orimulsion gasifier has been carried out to analyze the characteristics of chemical reaction by orimulsion droplets. In this study, our interest has been focused on the effect of oxidizer to orimulsion ratio, which is one of the key parameters of gasification operation, as well as on the distribution of chemical species. In addition, we have conducted numerical calculations to understand the effect of droplet size, spray angle and injection velocity of fuel so as to acquire the basic information on the operating range of orimulsion gasifier. The result of numerical calculations showed that the gas composition of CO and H$_2$concentrations was the highest when the oxidizer to orimulsion ratio was about 0.88 and the reactivity of orimulsion increased as the droplet size reduced with proper spray angle. Also, we have carried out the analysis on the orimulsion gasification in the 100 ton/day-scale gasifier based upon the prior study in order to obtain the basic data for the proper operating condition using orimulsion feed.

• Composites Research
• /
• v.15 no.4
• /
• pp.17-22
• /
• 2002

Small diameter composite helical springs (CS) are developed using a hot plated mold for reinforcement of common optical fiber jumper cord (OJC). The outer diameters of the springs are about 2 ~ 3mm. These springs are inserted into the OJC to protect the damage of an optical fiber from the sudden lateral load. Two types of CS, Yarn type (Y-type) and Band type (B-type), are manufactured to compare the effectiveness for the damage protection. The experimental works were conducted to check the effect of the CS covered around OJC on the mechanical and optical properties. Experimental observations show a considerable effect on the flexural resistance, hence slowing down the deterioration of the optical power by the internal damage of the fiber. Obtained main results are as follows: (1) Y-type CS has better protection abilities to lateral loading than B-types. (2) Compared with bare OJC, CS-OJC has less power loss under the loading. (3) OJC covered with the composite coil spring has a possibility for a practical usage with full fruits.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.3
• /
• pp.211-217
• /
• 2014

This study analyzes the nonlinear interaction between two different vortex shedding frequencies from a cylinder with two diameters. In particular, two different vortex shedding frequencies are generated by preparing a cylinder having two diameters artificially. Flow velocity fluctuations behind the cylinder are measured three-dimensionally. Additionally, we fabricated a hole and placed a pressure transducer for measuring the pressure on the cylinder surface. The pressure signal from the pressure transducer is used as basic signal. A TSC(Trans Spectrum Coherence) is used for checking the strength of the nonlinear interaction between two different vortex shedding frequencies. As a result, the following are clarified: i) frequency distribution behind the cylinder, ii) three-dimensional flow state behind the cylinder through calculation of ensemble average, and iii) close relationship between the vertical vortex and change of low frequency by nonlinear interaction between two different vortex shedding frequencies from the cylinder with two diameters.