• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.4
• /
• pp.161-167
• /
• 2001

By means of analyzing the problems in monitoring plan, design, installation, operation based on maintenance monitoring system installed in subway tunnel section, the improved methods of were proposed for applying to subway monitoring maintenance effectively in the future. The choice of the better monitoring system, the operating method of monitoring system, the confidence and continuity of maintenance monitoring, the performance of responsible monitoring supervision in the phase of the planning of monitoring and design were proposed. The problem and developed plan in the different monitoring systems, the calibration and correction of monitoring system, the analysis for the results and plan for maintenance in the phase of installation of monitoring system and operation were also proposed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.3
• /
• pp.195-202
• /
• 1999

This study present the stability of middle slabs directly supporting train loads in the subway station. According to results of Quality confirmation, mixing and curing conditions are good. But, when effects of hydration heat are analyzed, cracks seems to take place because tensile stress is higher than tensile strength in several points of middle slabs. It is found that vibration by train running don't have an effect on cracks in the structure. The structural analysis shows that there is no problem on the stability of structural body, but the design through 3-dimensional analysis is need to consider columns and opening specially in the subway station structures.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.123-128
• /
• 2002

In this paper, an averaged constitutive model of concrete and reinforcing bars for RC structure and path-dependent Ohsaki's model for soil are applied, and an elasto-plastic interface model having thickness is preposed for seismic analysis of underground RC subway station structure. A finite element analysis technique is developed by applying aforementioned constitutive equations and verified through seismic analysis of underground RC subway station. Then, failure mechanisms of the RC subway station structure under seismic action are numerically derived. Then, failure modes and damage levels of the station are also analytically evaluated for the cases of several designs of the underground RC station.

• Explosives and Blasting
• /
• v.13 no.3
• /
• pp.7-18
• /
• 1995

On the Seoul sub-way tunnel works 7-20 site, Cautious blasting works were so effectivelly carried out. The vibration record were under 0.3cm/sec and blasting noise was under 80dB. Which was measured at the ground of house. At a result cautious blasting works under above allowable value was not influenced the structure of house and living conditions. On the architectural survey, They were some hair crack on the wall and floors but this was not a crack from blasting works.

• Explosives and Blasting
• /
• v.12 no.1
• /
• pp.5-31
• /
• 1994

On the Seoul Sub-way Tunnel works (8-6 site ). Cautious blasting works were so effectivelly tarried out the vibration record were under 0.3cm /sec and blasting noise was under 75dB which was measured at the ground of house. As a result cautious blasting works under above allowable value was not influenced the structure of house and living. On the architectural survey, There were some hair crack on the wall and floors but this was not a crack from balsting work.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.359-360
• /
• 2000

서울시 지하철은 일 평균 400만명 이상의 높은 수송율로 교통난 해결에 일조하고 있으나 지하역사내 공기질 오염도에 대한 사회적 관심이 증가하고 있는 실정이다. 지하역사내 오염물질 발생은 주로 흡기시설 및 열차풍에 의한 외부공기의 유입과 승객들에 의한 외부먼지의 유입을 들 수 있으며, 역사내부의 구조물에서 자체 생성되는 물질을 포함할 수 있다(김윤신 등, 1996). (중략)

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.469-472
• /
• 2003

알루미늄 및 그 합금은 가볍고 강도가 높으며, 내식성과 재활용성이 뛰어난 특성을 가지고 있어서 각종 구조물 및 부품의 경량화가 요구되는 분야에 급속하게 이용이 확산되고 있다. 특히, 고속전철, 지하철 등의 철도차량, 선박, LNG선 탱크, 건축 등은 물론이고, 알루미늄 엔진 및 차체개발로 경량화를 목표로 하는 자동차 산업에 확대 적용되고 있다.(중략)

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.96-103
• /
• 2002

In this study, design concepts of Seoul Subway Construction (901∼914) are reviewed in relation to the cases for temporary soil support wall systems which are revealed in highly developed design competitions such as Turnkey and Alternative based on. Especially soil and rock properties, various design schemes for dealing with soil and water pressures, new technology adopted etc are discussed very profoundly and broadly for the better understanding and additional clues for constructing new design technologies.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.565-570
• /
• 2024

Recently, due to adjacent excavation work such as new buildings and common tunnel expansion concentrated around the urban railway, deformation of the underground box and tunnel structure of the urban railway built underground has occurred, and as a result, repair and reinforcement work is frequently carried. In addition, the subway is responsible for large-scale transportation, so ensuring the safety and drivability of underground structures is very important. Accordingly, an automated measurement system is being introduced to manage the safety of underground box structures. However, there is no analysis of structural damage vulnerabilities caused by subsidence or uplift of underground box structures. In this study, we aim to analyze damage vulnerabilities for safety monitoring of underground box structures. In addition, we intend to analyze major core monitoring locations by modeling underground box structures through numerical analysis. Therefore, we would like to suggest sensor installation locations and damage vulnerable areas for safety monitoring of underground box structures in the future.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.619-622
• /
• 2011

케이블 정착구 검토를 위해서 사장교 전 체계를 모델링하는 것은 전체모델링 해석시 많은 노력과 시간이 요구되고 해석결과의 분석 또한 어려움이 많다. 따라서 문제가 예상되는 부분만을 국부 상세해석하여 구조적 거동을 정확히 파악하는 것이 필요하다. 케이블 정착부에는 여러 보강재들로 구성되어 있어 국부해석에 어려움이 있다. 따라서 실제와 가능한 한 근접하도록 모델링을 하고 전체 구조물의 거동을 국부 상세모델에 적적히 반영할 수 있도록 경계조건을 설정하는 것이다. 본 논문에서는 부산 지하철 4호선의 아치형 사장교를 국내 범용 구조해석 프로그램인 MIDAS/CIVIL을 이용하여 아치리브와 거더정착구 모델링을 실시하였다. 해석 후 해석의 타당성을 검토하고 정착부의 안전성을 확보할 수 있는지 검토 분석 하고자 한다.