• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1713-1716
• /
• 2008

최근 배출되는 미량유해물질로 1991년 페놀, 2004년 1,4-다이옥산, 2006년 퍼클로레이트 검출 등 빈번하게 원수수질 오염사고가 발생하고 새로운 미량유해 화학물질의 배출이 우려됨에 따라, 일부 시민단체, 시의회, 언론 등에서 깨끗하고 안전한 상수원수 확보를 위한 근본적인 대책을 요구하는 목소리가 커지고 있다. 이에 대한 대책의 일환으로 취수원 이전에 대한 타당성 등이 검토되고 있다. 이러한 요구를 바탕으로 본 연구에서는 K-WEAP 모형을 이용하여 낙동강수계 물수지 분석을 실시하였다. 관련된 기존자료를 이용하여 용수수요량을 산정하였으며, 갈수량시 물수지 분석을 실시하였다. 연구에 사용된 K-WEAP 모형은 SEI-B(Srockholm Environment Institute, Boston Center)에서 개발된 WEAP에 기반을 두고 우리나라에 특성에 맞게 모의형태를 개선하고 한글화한 모형으로 분석대상 지역으로서 도시지역과 농업지역, 단일 소유역이나 복잡한 하천유역의 물 수요-공급 시스템에 적용할 수 있다. 또한 K-WEAP 모형은 용수목적별 수요량 분석, 물 절약, 수리권과 배분 우선순위, 지하수와 하천유량 모의, 저수지 운영, 수력발전, 오염물질 추적, 생태계 필요수량 분석과 같은 광범위한 부문의 문제들까지 다룰 수 있다. 본 연구에서 물수지 분석에 사용된 대상구간은 낙동지점에서 고령교지점까지 약 120km이며, 낙동강에 유입되는 지류로는 감천과 금호강을 대상에 포함하였다. 대상구간에 대해서는 3가지의 시나리오를 바탕으로 모의를 진행하였다. 선정된 3가지 시나리오는 현재의 대구 인근지역의 취수와 방류를 고려하는 상태와 현실가능성이 있는 2가지의 대안에 대해서 분석을 실시해 보았다. 대안들은 각각의 대구 취수시설을 구미 상류로 이전하여 취수하는 상황과 구미지역 및 칠곡지역의 방류구 시설을 하류로 이전하여 방류하는 상황으로 가정하여 분석을 실시하였다. 분석결과 현재 상태의 시나리오에서만 갈수기시 만족할 만한 결과를 보여주었고 나머지 2가지의 시나리오에서는 유량이 부족함을 나타났다. 현재의 상태를 모의한 시나리오를 제외한 시나리오의 분석에서는 갈수기 시에 물 부족을 겪게 된다. 이는 낙동강 상류에서 추가방류가 없으면 해결되지 못하는 상황으로 다른 대안들(신규 댐 방류 등)에 대한 추가적인 시나리오 분석이 필요할 것으로 판단된다.

• Journal of Radiation Protection and Research
• /
• v.35 no.4
• /
• pp.172-177
• /
• 2010

The radioactive effluents from pressurized heavy water reactors (PHWRs) are relatively larger than those from pressurized water reactors (PWRs). Futhermore, radioactive effluents from PHWRs are released continuously. Thus, the discharge of radioactive effluents is strictly controlled. To do this, radiation detectors are installed at stacks of reactor buildings to monitor the concentration of radioactive effluents in real-time. Derived release limits (DRLs) of annual discharge are also set up for each radionuclide and effluents are rigidly controlled not to exceed those limits. In this paper, the discharge process of radioactive effluents, the standard for establishment of DRL and its methodology, and currents status for PHWRs were reviewed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.973-980
• /
• 2015

With their wide geographical distribution, unconventional resources are continuously compared against conventional resources, but their development is expanding because TRRs (Technical Recoverable Resources) are similar to conventional resources. In particular, there is active development of unconventional gas resources such as shale gas, tight gas, CBM (coalbed methane) and gas hydrate. However, it is difficult to calculate the material properties of unconventional resources, especially the gas content, with current geophysical logging technology. Additionally, some overseas companies have monopolies on related equipment and materials. Therefore, this study developed a reservoir PCS (Pressure Core Sampler). It can collect core samples without gaseous loss by maintaining high pressure from the moment the core is sampled and record pressure and temperature in real time. Successful performance testing was also carried out for official verification of the manufactured PCS. The reservoir PCS will contribute to the acquisition of geophysical well logging data as well as accurate and reliable cores.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.585-590
• /
• 2012

Coronary Intervention treatment has become the core that is the test of cardiac catheterization to conduct treatment with Coronary Arteriography. Operators must be careful in Coronary Intervention treatment because the stent is inserted into the point of narrowing of blood vessel. So, the operator must correctly recognize the path of blood vessel to deal with the problems which are damages and ruptures of blood vessel, and there would be some errors of finding the path of blood vessel by bad qualify of the image. Therefore in this paper, median filtering is conducted by preprocessing to evaluate the performance of the effect of noise of the image that affects quality of the image and Fuzzy Edge Extraction Techniques is tested by using Soble Edge Extraction Techniques to compare the performance with The Fuzzy Edge Extraction Techniques. In result, the performance, removing the noise and extracting the signal of Fuzzy Edge Extraction Techniques using median filtering, demonstrates the superiority.

• Journal of KIISE
• /
• v.45 no.3
• /
• pp.311-320
• /
• 2018

Recently, the use of digital audio and video as proof in criminal and all kinds of litigation is increasing, and scientific investigation using digital forensic technique is developing. With the development of computing and file editing technologies, anyone can simply manipulate video files, and the number of cases of manipulating digital data is increasing. As a result, the integrity of the evidence and the reliability of the evidence Is required. In this paper, we propose a technique for extracting the Electrical Network Frequency (ENF) through a grid of power grids according to the geographical environment for power supply, and then performing signal processing for peak detection using QIFFT. Through the detection algorithm using the standard deviation, it was confirmed that the video file was falsified with 73% accuracy and the forgery point was found.

• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.144-154
• /
• 2020

Purpose: This paper is a fundamental study on the applicability of the smart bolt developed for monitoring system to detect the leakage of water supply valve. Method: A leak detection experiments were conducted using the smart bolt having embedded strain sensors and accelerometer. The smart bolt used in study meets the allowable criteria of torque and tensile stress for water supply system, and it can be applied to a joint of the water supply valve by behaving well within the allowable limits. Result: As a result of the simulated leak tests, a leak signal at the valve leak point was detected in a band of 60Hz, and the main pipe leaking point was observed to produce a leak signal having much higher frequency than that of the valve leak point. This seems to result in a total coupled vibration under unconfined conditions of the pipes. Conclusion: The smart bolts appeared applicable to detecting a leaking signal from the water supply valve.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.556-562
• /
• 2005

This study was performed to evaluate effects of pH and heavy metals on soil pollution in 167 sites of Gangwon-do. The overall pH range of soils was 4.3~8.4 The average soil pollution of Cd was 0.089 mg/kg (0.000~3.493 mg/kg), Cu 3.093 mg/kg (0.078~60.263 mg/kg), Pb 4.74 mg/kg (0.01~38.08 mg/kg), Hg 0.054 mg/kg (0.002~1.050 mg/kg), and As 0.971 mg/kg (0.031~77.051 mg/kg), but $Cr^{6+}$ was not detected in these soils. The average concentration of heavy metals in these soils was acceptable under the preliminary standard of soil preservation acts in Korea.

• The Journal of Natural Sciences
• /
• v.8 no.1
• /
• pp.87-92
• /
• 1995

In the Vicinity of the Sindae-dong waste disposal site in Taejon, the average Cu, pb and Zn concentrations in soils are higher than those in other Korean soils but these are not high enough to cause any harmful effect to human and animal through the crop plants. Copper, Pb and Zn are not detected in the groundwater samples and F, Cl, $NO_2$, $NO_3$ and $SO_4$ concentrations in groundwater samples are lower than drinking water standards. However, the pH of groundwater sample in site D is 5.58 which is not suitable for the drinking water. With the electric resistivity method, the water-containg layers are found in contaminated soils and the resistivity values are considerably low because of the dispersion of plume by the leak of leachates. According to the results from the magnetic survey method, the anomalous values of the total geomagnetic fields and their gradients are found in the sampling site of low resistivity and high trace element concentrations.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.4 s.310
• /
• pp.66-73
• /
• 2006

Safety is the most important for all traffic management and control technology. This paper focuses on developing a flexible, reliable and real-time processing algorithm which is able to generate signal for the entering vehicle at the joining road through a camera and image processing technique. The images obtained from the camera located beside and upon the road can be used for traffic surveillance, the vehicle's travel speed measurement, predicted arriving time in joining area between main road and joining road. And the proposed algorithm displays the confluence safety signal with red, blue and yellow color sign. The three methods are used to detect the vehicle which is driving in setted detecting area. The first method is the gray scale normalized correlation algorithm, and the second is the edge magnitude ratio changing algorithm, and the third is the average intensity changing algorithm The real-time prototype confluence safety signal generation algorithm is implemented on stored digital image sequences of real traffic state and a program with good experimental results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.528-535
• /
• 2011

In this paper, a compact doppler sensor with oscillator type active antenna operating at 2.4GHz frequency band is proposed to measure the distance to a moving object. The oscillation frequency is shifted depending on approaching of the object, and a detection circuit discriminates the frequency deviation. The active antenna has been designed and simulated. The prototype fabricated has a small circular disk type of diameter 30mm and height 4.2mm. As for antenna performance, broadside radiation pattern with beamwidth of $120^{\circ}$ and oscillation frequency of 2.35GHz has been measured. Test results as a range sensor shows that signal voltage of about 240mV has been obtained for conducting plate moving 1 meter away from the sensor. And, signal voltage has been linearly increased to the ground from 5m height by free-falling the sensor.