• Journal of the Korean GEO-environmental Society
• /
• v.12 no.4
• /
• pp.33-41
• /
• 2011

In case of building up port facilities on soft ground, unsymmetrical surcharge of embankment, which make the excess pore water pressure to increase, causes to occur lateral displacement due to plasticity of soil. A study on lateral displacement and settlement of the caisson, which is installed on improved ground, was accomplished. The field measurement data and calculated values obtained from FEM program of Plaxis were compared and analyzed. For numerical analysis, the properties of soils, constructions stage and time were considered. Lateral displacement was measured at the point of inclinometers installed in front of caisson. Settlement was measured at the center of extra embankment behind of caisson. Comparison of measured and calculated for lateral displacement showed that the calculated value was greater than the measured, and increasing trend was different. The calculated value showed step increasing as step extra embankment applied, whereas the measured gradually was increased. For settlement of embankment, the amount of both measured and calculated were similar, but the trend was different like that of lateral movement.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.15-25
• /
• 2001

본 고에서는 블록식 보강토 옹벽의 지진시 거동에 관한 유한요소해석 결과를 다루었다. 보강토 옹벽의 지진시 변위거동을 검토한 결과 벽체저부를 지점으로 하는 캔틸레버형태의 변위 거동을 보였으며 따라서 옹벽 상단부에서의 보강재 인장력 증가가 현저하게 나타나 벽체전반에 걸친 분포양상은 균등한 경향을 보였다. 한편, 지진하중으로 인한 증분유발인장력에 관하여 검토한 결과 기존의 보강토 옹벽 내진설계기준과 비교하여 정성.정량적인 측면에서 상당한 차이를 보였으며 내진설계기준이 전반적으로 과소평가 하는 것으로 나타났다. 아울러서, 내진설계측면에서 변위억제 방안에 관한 매개변수 연구결과 임의 조건에 있어서 최대의 보강효과를 나타내는 보강재 임계 강성과 포설길이가 존재하며 최적의 보강효과를 얻기 위해서는 이에 대한 종합적인 검토가 요구되는 것으로 나타났다. 본 고에서는 연구결과를 종합적으로 고찰하여 실무 적용관점에서의 주안점을 언급하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.2
• /
• pp.19-27
• /
• 2007

In this study, the centrifugal tests were performed with varying the angle of slope such as 1:3, 1:2.5, and 1:2 in order to analyze the deformation and failure type of dredged clay slope for a short term. The displacement mode, displacement vector and the variation of pore pressure with the different slope angle were measured. As a results, even though the displacement in the slope after 4 months were developed in the case of 1:3 for the dredged slope, there are little problems to obtain the stability of dredged slope because the original construction section maintains. Also, in the case of 1:2.5 after 4 months the local slope failure occurred and in the case of 1:2 after 2 months the circle failure starting from the point of the tensile crack occurred. After reviewing the results, the maximum vertical displacement occurred at the crest of slope and maximum horizontal displacement was about double of maximum vertical displacement.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.111-117
• /
• 2008

This study aims to develop a system which is able to monitor and analyze behavior of long span bridge in real time using multiple GPS. Through setting up many GPS at the important points of long span bridge and measuring displacement in real time, over all behavior of bridge could be analyzed. Behavior analyzing system developed in this study is able to digitize and visualize the overall and points displacement of bridge and deal with events actively. Also it is able to calculate statistical data related to analyze behavior through the constructing a database of measuring data.

• Journal of Broadcast Engineering
• /
• v.22 no.2
• /
• pp.240-252
• /
• 2017

Multi-view video codec based on the High Efficiency Video Coding (MV-HEVC) has high encoding complexity because it exploits an additional reference picture for disparity compensation prediction (DCP) when the picture of dependent view is encoded. In this paper, we propose an efficient method to reduce the complexity of disparity motion vector search for the MV-HEVC. The proposed method includes the initial search point decision method using affine transform and the adaptive search range decision method. The simulation results show that the proposed method reduces the complexity of disparity motion vector search up to 90.78% with negligible coding efficiency degradation. Also the results show that the proposed method outperforms other conventional techniques reducing complexity.

• The Journal of the Korea Contents Association
• /
• v.16 no.1
• /
• pp.362-369
• /
• 2016

Recently, Last to check the security status of various medium and large bridge structures using various kinds of measurement equipment, but most of the methods are used to measure and check the displacement behavior of the bridge by a certain period. In this study, receive GPS satellite signals that can be observed in real time the whole region, a bridge to automatically measure the displacement and behavior characteristics of the structure in real-time in mm over the 24 hours, the measurement information and transmits the data to the wireless network, by making use, it was applied to the real-time monitoring system in connection with a bridge to be able to automatically notify GNSS fine displacement behavior. In fact, analysis and receives the measurement data to GNSS provided in the upper bridge of the middle and large-sized aging for this purpose, measuring USN and at the same time is converted into a three-dimensional position information of a test study was conducted to monitor the bridge displacement in real time. As a result, a vertical displacement of about 0.027~0.037m at the measurement time of day of the measurement point is that the repeated and confirmed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.213-219
• /
• 2013

This study examined the static characteristics of a spool valve with a hybrid lap between the spool land and the sleeve. The static equation for the pressure characteristics was derived from flow equations that depend on the spool displacement, and the final model was derived from $q_a=q_b=0$ because the pressure characteristics test needs to block the control port in the valve. The static equation for the flow characteristics was derived from the pressure characteristics when the control port is open ($q_a=q_b$, $p_a=p_b$). The characteristic equation in the shifted region was assumed from the proportional relationship between the pressure-flow characteristics and the spool displacement.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.4
• /
• pp.361-368
• /
• 2013

As one way to describe the behavior of a vibrating string, analogies to a transmission line have been made based on the fact that they have oppositely travelling waves on each of them. In such analogies, a rigid end to the string has been represented as an open circuit, and the displacement of the string as the current on the transmission line. However it turns out that the rigid end corresponds to a short circuit, the displacement to the voltage by the theory of the transmission line, and it is confirmed by experiments with circuit simulations. Based on these discoveries, a transmission line based plucked string model comprising a transmission line, two piecewise linear current sources, and switches is proposed. The proposed model is validated by showing that the voltage at the arbitrarily chosen location, and the voltage calculated over an infinitesimal portion at the end of the transmission line are consistent with the displacement at the corresponding location and the force on the rigid end of the string from the well known difference form of a wave equation governing the behavior of the string with its fundamental frequency tuned to that for the proposed model, respectively. Moreover, the applicability of the proposed model to modeling string and wind instruments is presented.

• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.403-411
• /
• 2016

A three-dimensional finite element analysis was conducted to analyze the predictable distances of a fault zone by using longitudinal displacement on tunnel face, trend line, L/C ratio, and C/C₀ ratio at tunnel crown. The analysis used 28 numerical models with various fault attitudes. As a result, those faults that have drives with dip could be predicted earliest in L/C and C/C₀ ratio analysis. And those faults that have drives against dip could be predicted earliest in L/C ratio and longitudinal displacement analysis. In addition, the fault zone ahead of tunnel was predicted in most models by using longitudinal displacement, trend line, L/C ratio, and C/C₀ ratio. However, the longitudinal displacement among these methods may be most usefully predict a fault zone since it is displacements can be measured immediately after tunnel excavation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.918-922
• /
• 2008

본 연구에서의 측정 대상인 공주지점은 금강 본류로 홍수 예 경보 지점이며, 그 하상이 대부분 모래로 구성된 충적하천으로 간주된다. 유사량 측정은 강우가 집중되는 6$\sim$9월의 홍수기(25회)와 이를 기준으로 전 후시기인 저 평수기(2회)로 나누어 총 27회로 측정하였고 부유사량(D-74, P-61A: 수심적분법), 하상토(BM-54, 홍수기전 후 2회 채취), 수리량(수위, 유속, 측정수심, 수면폭, 수면경사, 수온)등의 실측자료를 이용하여 미측정구간의 유사량을 포함한 총유사량을 추정(실측+계산; Modified Einstein, 간접계산; Engelund & Hansen, Yang, Ackers & White)하였다. 이러한 분석결과를 가지고 유량-부유사농도와 부유사량 및 총유사량 관계에 대해 살펴보았다. 전체적으로 유량에 대한 측정성과들의 변위와 저유량시 산포도에 있어 다소 큰 경향을 보였고, 주요 강우사상별로 보았을 때 루프(Loop)현상을 볼 수 있었다. 이러한 분석결과의 상충은 하천의 수리, 유사특성과 추정방법의 적용한계 등의 서로 다른 제한된 범위의 자료들을 이용하여 분석하는 데서 오는 차이, 특히 유량, 수심, 하상토의 입경크기 등 자료의 범위가 추정공식들이 추천하는 범위에서 벗어났기 때문인데, 이는 총유사량 공식에 대한 범용성이 적다는 것을 의미한다.