• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.345-345
• /
• 2020

우리나라는 물산업 강국 도약을 위한 글로벌 경쟁력을 갖추기 위해 2015년 세계물포럼 이후 복합 수재해 대응과 능동적 하천관리 분야가 중요시되고 있다. 기존의 하천관리는 수위관측소 및 하도계획을 중심으로 이루어져왔으나 최근에는 항공측량, 드론 등 원격관리시스템에 기반을 둔 하천 통로에 대한 입체적인 3차원 관리로의 인식 전환이 고려되는 추세이다. 대부분 수위 및 하도를 중심으로 한 조사방식은 계측장비, 인력, 시간 등 많은 소요비용이 필요하게 되어 급변하는 하천 공간 조사 기술로 제한적 요소가 많아 현재의 하천조사 시스템으로는 하천관리에 필요한 데이터를 환경변화에 맞추어 신속하고 정확하게 취득하기가 어려운 실정으로 하천관리 고도화를 위해 필요한 자료를 적기에 신속하고 효율적으로 구축할 수 있는 기술 개발 필요한 실정이다. 사회 환경의 발달로 급변하는 환경에 맞는 적정한 하천관리를 위해서는 유역 및 하천에 대한 수문정보 생산 및 하상변동조사가 필요하고 첨단기술(ICT)을 활용하여 조사의 효율성, 안전성 및 정확성을 높일 필요성이 있다. 한편, 하천유역조사는 하천유역에 대한 다양한 정보 수집을 목표로 하나 그간 유역조사에 대한 체계적인 연구가 이루어지지 않아 수요자의 요구 자료 제공이 미흡한 실정이다. 최근 수심, 하상, 하천재료 등 하천법에 규정된 측량은 현장 직접계측을 통해 실시되고 있으며 측량의 공간적·시간적 범위의 변동으로 기존 방식의 비용이 급증하게 되어 신기술을 통한 효율화가 필요한 실정이다. 현재 하천조사를 위해 위성 및 유인항공기 등 다양한 방법이 활용되고 있으나 고빙용을 수반하고 위성영상은 공간해상도가 낮아 폭이 좁은 하천에 적용하는데 한계가 있다. 또한, 폭이 좁고 길게 형성된 하천의 특성상 항공측량 보다 드론이 효율적으로 드론에 레이저 광선으로 지형을 측량하는 장비를 탑재해 3차원 지형을 측량하는 방법이 유리하다. 따라서 본 연구에서는 동진강 상류 하천을 대상으로 드론을 활용할 경우 투입인력 및 소요시간 절감, 장비 및 인력 진입 불가지역에 대한 정보획득, 높은 공간해상도, 항공측량 대비 경제성이 높은 것으로 판단되어 드론을 활용하여 하천지형 모니터링을 실시하여 유역관리 및 수질모델링에 필요한 지도 생성 및 유역의 공간 정보를 획득하여 향후 유역관리 모형의 기초자료로 활용하고자 하였다.

• Journal of Korea Foundry Society
• /
• v.18 no.6
• /
• pp.534-540
• /
• 1998

6061Al-matrix composite with TiNi shape memory fiber as reinforcement has been fabricated by Permanent Mold Casting to investigate the mechanical properties of the smart composites. The composites have showed good interface bonding as a result of the analysis of SEM and EDX. The smartness of composite is given due to the shape memory effect of the TiNi fiber which generates compressive residual stresses in the matrix material when heated after being prestrained. The tensile strength of the composites was tested at temperatures between $90^{\circ}C$ and room temperature with increasing amount of pre-strain, and it showed that the tensile strength at $90^{\circ}C$ was higher than that of the room temperature. Especially, the tensile strength of the composite increases with increasing pre-strain. It showed that hardness of matrix was higher than that of common 6061Al alloy.

• Korean Journal of Materials Research
• /
• v.11 no.12
• /
• pp.1057-1062
• /
• 2001

We investigated the change of mechanical properties for TiNi shape memory alloy by heat treatment. 6061Al matrix composites with TiNi shape memory alloy as reinforcement were fabricated by vacuum casting. TiNi alloy has the maximum tensile strength at 673K treated and there is no change of tensile strength and hardness at 448K treated. The composites, prepared by vacuum casting, showed good interface bonding by vacuum casting. It was about 3$\mu\textrm{m}$ of thickness of the diffusion layer. Tensile strength of the composite was in higher than that of 6061Al alloy as increased value of about 70MPa at room temperature and about 110MPa at 363K. We thought that the increase of the tensile strength at 363K was due to reverse transformation of the TiNi shape memory alloy.

• Korean Journal of Materials Research
• /
• v.12 no.12
• /
• pp.955-961
• /
• 2002

2.7vol%TiNi/6061 Al composites with TiNi shape memory alloy as reinforcement were fabricated by vacuum hot press. It was investigated by OM, SEM, EPMA and XRD analysis for the behavior of diffusion layer formation on various heat treatment condition. Thickness of diffusion layer was increased proportionally according to heat treatment time. The layer was formed by the mutual diffusion of TiNi and Al. The diffusion rate from TiNi fiber to Al matrix was faster than that of reverse diffusion path. The more diffused layer was formed in Al matrix. The diffusion at interface layer was consisted of $A1_3$Ti, $Al_3$Ni analyzed by EPMA, XRD results.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.72-78
• /
• 2002

Thermomechanical behavior and mechanical properties of A16061 matrix composite with shape memory alloy(SMA) fiber are studied by using fnite element analysis(FEA). The smartness of the SMA is given due to the shape memory effect of the TiNi fiber which generates compressive residual stress in the matrix material when healed after being prestrained. In this paper, an analytical model is assumed two dimentional axisymetric model of one fiber and around the matrix. To evaluate the strength of composite usig FEM, the concept of smart composite was simulated on computer. The Shape memory effect(SME) simulation is very difficult using FEM because of the nonlinear analysis and the elastic plastic analysis. Thus, in this paper, the FEA was carried out at two critical temperature conditions; room temperature and high temperature(363K). The analysis is compare the finite element analysis result with the test result for the analysis validity.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.46-52
• /
• 2009

Statement of problem: Recently, titanium has become popular as superstructure material in implant dentistry because titanium superstructure can be easily milled by means of computer-aided design and manufacture (CAD/CAM) technique. But retention form such as nail head or bead cannot be cut as a result of technical limitation of CAD/CAM milling and bond strength between titanium and porcelain is not as strong as that of conventional gold or metal alloy. Purpose: The objective of this study was to evaluate the shear bond strength of three different materials: heat curing resin, composite resin, porcelain which were bonded to grade II commercially pure Titanium (CP-Ti). Material and methods: Thirty seven CP-Ti discs with 9 mm diameter, 10 mm height were divided into three groups and were bonded with heat curing resin (Lucitone 199), indirect composite resin (Sinfony), and porcelain (Triceram) which were mounted in a former with 7 mm diameter and 1 mm height. Samples were thermocycled for 1000 cycles at between $5-55^{\circ}C$. Shear bond strength (MPa) was measured with Instron Universal Testing Machine with cross head speed of 1 mm/min. The failure pattern was observed at the fractured surface and divided into adhesive, cohesive, and combination failure. The data were analyzed by one-way ANOVA and Scheffe's multiple range test (${\alpha}=0.05$). Results: Lucitone 199 ($17.82{\pm}5.13\;MPa$) showed the highest shear bond strength, followed by Triceram ($12.97{\pm}2.11\;MPa$), and Sinfony ($6.00{\pm}1.31\;MPa$). Most of the failure patterns in Lucitone 199 and Sinfony group were adhesive failure, whereas those in Triceram group were combination failure. Conclusion: Heat curing resin formed the strongest bond to titanium which is used as a CAD/CAM milling block. But the bond strength is still low compared with the bond utilizing mechanical interlocking and there are many adhesive failures which suggest that more studies to enhance bond strength are needed.

• Elastomers and Composites
• /
• v.34 no.2
• /
• pp.113-120
• /
• 1999

Nobody doubts to say that one of the most important performance polymers is a conductive polymer. The manufacturing process of the commercial conductive polymers has been known by mixing with the conductive materials, but it doesn't noticeably appear of a conductive function. One of the reasons is the lack of comprehension In compounding a carbon black with polymer rosins. This paper involves the understanding of compounding technology of the conductive carbon black filled composite. Our experimental results indicate that the fibrous shaped carbon black was hard to process but appeared of a superior conductivity compared to a stick or a sphelulite shaped carbon black. Therefore, it was processed with a processing oil in compounding, which led to a better processability and a better conductivity. This study was accomplished that the solution process compared to the melting process.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.2
• /
• pp.21-28
• /
• 2009

A grouting method has been widely used in construction of large-scale structure to reduce permeability and reinforce the ground. If cement and grout material were not mixed well in the injection tip equipment, an opposite flow and interception state of the chemical grouting can occur. McG (Multi-mixing counterflow prevented Grouting, McG) method installed a special grouting device to allow better mixing of the grouting material(above fineness $6,000cm^2/g$) and prevent backward flow. The block of nozzle also diversify powder rate of cement. YSS (Youngil Special Silicate, YSS) that lowers $Na_2O$ and thereby increases durability was developed by gel-forming reaction material. The seepage state and unconfined compressive strength of the injection material using the special injection tip equipment was tested in this study. The results of this study showed that the uniaxial compressive strength, permeability, N-value, TCR and RQD were improved by this method. Engineering characteristics obtained by the special injection tip method will be compared with those by the other method through various field tests from now on.

• Journal of the Korea Concrete Institute
• /
• v.21 no.2
• /
• pp.179-186
• /
• 2009

The peculiarity pointed out for high strength concrete is the occurrence of spalling during a fire. Recently, there are many efforts such as development of all types of spalling reducing materials and other innovative materials in various fields. Need is now to examine the adequate mixing proportions of these materials. This study intended to derive experimentally and statistically mix proportions that can represent the basic quality requirements as well as the optimal effects on the fire-resistance for 4 types of functional materials that are metakaolin, waste tire chip, polypropylene fiber and steel fiber. Here, the tests were planned through an optimal test method using an orthogonal array table with 4 parameters and 3 levels. The statistical analysis adopted the response surface analysis method. Results verified mutual complementary contribution between the materials when using a combination of the functional materials selected as parameters for the strengthening of the fire-resistance of 80 MPa-class high strength concrete. Besides, the optimal conditions of the fire-resistance strengthening materials derived through response surface analysis were a volumetric replacement of silica fume by 80% of metakaolin, a volumetric replacement of fine aggregates by 3% of tire waste chip, and an addition of 0.2% of the whole volume by polypropylene fiber without mixing of steel fiber. In such cases, the basic characteristics as well as the fire-resistant characteristics of high strength concrete were also satisfied.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.6
• /
• pp.21-35
• /
• 2011

This study is basic research which aims to compare and analyze changes in rural areas in modern times. The main purpose of this study is to comprehend the characteristics of changes in the Korean rural landscape and to suggest the implications for preservation and maintenance of the rural landscape. To help in understanding the rural landscape systematically, it should be divided into six types: housing landscape, cultivation landscape, green landscape, waterside landscape, streetscape and symbolic and religious landscape. According to this step, the contents and the procedures of changes were analyzed generally. Based on the literature review and field survey, the styles of changes were deduced to be formation, alternation, relocation, damage and restoration on landscape elements. Lastly, it was concluded that complex changes of landscape in rural areas from the government's development policy have been continued from macroscopic changes like overall structure and system of landscape to microscopic changes like shape, material, size and color of each landscape element. Rural villages which have not had the government's development policy applied to them may not be appropriate for this study. However, this study has significance in that it can suggest the direction for desirable rural planning. Future studies need to consider landscape change through not only the development policy but also economic, social and cultural factors.