• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.6
• /
• pp.532-542
• /
• 2009

Dynamic Thermal Management (DTM) technique is generally used for reducing the peak temperature (hotspot) in the microprocessors. Despite the advantages of lower cooling cost and improved stability, the DTM technique inevitably suffers from performance loss. This paper proposes the DualFloating-Point Adders Architecture to minimize the performance loss due to thermal problem when the floating-point applications are executed. During running floating-point applications, only one of two floating-point adders is used selectively in the proposed architecture, leading to reduced peak temperature in the processor. We also propose a new floorplan technique, which creates Space for Heat Transfer Delay in the processor for solving the thermal problem due to heat transfer between adjacent hot units. As a result, the peak temperature drops by $5.3^{\circ}C$ on the average (maximum $10.8^{\circ}C$ for the processor where the DTM is adopted, consequently giving a solution to the thermal problem. Moreover, the processor performance is improved by 41% on the average by reducing the stall time due to the DTM.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.522-526
• /
• 2010

Heat storage application techniques can be categorized into the sensible heat storage and the latent heat storage according to the method of heat storage. Heat storage is the way of saving remaining heat when heating and cooling loads are light, and then using it when the heating and cooling loads are heavy. Latent heat storage is defined as the method of saving heat by using substances which have high potential heat when phase change is in the range of a certain temperature and when heat storage space is small, compared to those of sensible heat storage and it is possible that absorption and emission of heat at a certain temperature. This study is conducted to save energy when either air-conditioning or heating is operated in a building. We have tried to find out the essential properties of matter and the optimum mixing rate about cement and gypsum for building materials, which have been widely used for proper phase change materials (PCM), when thermal environment property is applied. So we obtained the result of the cooling delay effect about 19% with heat storage mortar containing 3 wt% of PCM.

• Tunnel and Underground Space
• /
• v.28 no.1
• /
• pp.97-110
• /
• 2018

The application of sprayed waterproofing membrane with high adhesion and ductility is considered to be promising as a measure for repair and reinforcement of a tunnel structure. Therefore, a powder-type and one-component membrane prototype with high tensile and bond strengths was made in this study. Then, its reinforcement effect on a shield segment was evaluated by carrying out a series of full-scale loading tests of segment specimens on which the membrane was sprayed. From the tests, it was confirmed that the initial cracking loads increased by approximately 34% due to cracking retardation by membrane coating. Even though the increase of failure loads were not so high as cracking loads, the strain-softening behaviors were observed from specimens coated by the membrane. Therefore, it is expected that the membrane coated on the inner surface of a lining might be effective in preventing its brittle failure.

• Journal of Radiation Protection and Research
• /
• v.29 no.4
• /
• pp.231-236
• /
• 2004

An imaging plate(IP) detector, a two-dimensional digital radiation detector that can acquire image of radioactivity distribution in a sample, has been applied in many fields; for industrial radiography, medical diagnosis, X-ray diffraction test, etc. In this study, the possibility of IP detector to be used lot measuring radioactivity of sample is explored using its high sensitivity, higher spatial resolution, wider dynamic range and screen uniformity for several kinds radiations. First, the IP detector is applied to measure the surface uniformity for area source. Surface uniformity is measured rapidly and nondestructively by measuring the radioactivity distribution of common standard area source$(^{241}Am)$. Next, the IP is employed to study the possibility of measuring an extremely low-level activity of environmental sample. For this study the screen uniformity, shield effect of background radiation, linear dynamic range and fading effect of the IP detector is investigated. The potato, banana, radish and carrot samples are chosen to measure ultra low-level activity of $^{40}K$ isotope. The efficiency calibration of IP detector is carried out using the standard source.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.444-449
• /
• 2002

The term 'impaction' is used to designate a tooth which remains unerupted in the jaw beyond the time at which it should normally be erupted. The main causal factors are local (lack of space, ectopic positions of teeth, supernumerary teeth, cyst, the occurrence of infectious process in the eruption path, traumatic facial injury etc.). Systemic and genetic disorders, however, may have primary failure of eruption and retarded eruption as additional symptoms (cleidocranial dysplasia, osteopetrosis etc.). Most cases of impacted teeth reported in the literature are of permanent teeth. The absence of primary teeth occur rarely whereas impaction of second primary molars is more numerous than all other impactions. Impaction due to primary failure of eruption must be distinguished from the secondary infraocclusion. The etiology of impaction of primary teeth is probably related to early ankylosis of primary teeth, but it is not clear. Failure of eruption of primary teeth may cause a number of complications, such as interference with development and eruption of succedaneous teeth, formation of cyst, and damage to adjacent teeth. This study is to report cases of primary failure of eruption in the primary dentition.

• Journal of Digital Convergence
• /
• v.12 no.10
• /
• pp.317-327
• /
• 2014

To improve the efficiency of wireless channel, IEEE 802.11ac uses the DL MU-MIMO MAC scheme through which an AP transmits multiple frames to different mobile nodes simultaneously. IEEE 802.11ac DL MU-MIMO MAC needs a new step, called as TXOP sharing, between legacy IEEE 802.11n DL SU-MIMO's two operations, the obtaining an EDCA TXOP and the transmitting multiple frames for EDCA TXOP. In the TXOP sharing operation, both wireless channel destinations and frames transmitted for its TXOP period should are determined. So this paper deals with the TXOP sharing for improving IEEE 802.11ac MAC performance. However, the EDCA priority based method mentioned by IEEE 802.11ac standard document not fair among the buffers and the frames of buffers, and occurs in high_loss rate and high_delay about specific buffers. In this paper, we propose a new scheme of the TXOP sharing with sequencing p-AC, s-AC in similar properties, and all S-AC. This method provides a differentiated service without damage of EDCA characteristics.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.8
• /
• pp.619-630
• /
• 2003

We present a method of runtime configuration scheduling in reconfigurable SoC design. As a model of computation, we use a popular formal model of computation, hierarchical FSM (HFSM) with synchronous dataflow (SDF) model, in short, HFSM-SDF model. In reconfigurable SoC design with HFSM-SDF model, the problem of configuration scheduling becomes challenging due to the dynamic behavior of the system such as concurrent execution of state transitions (by AND relation), complex control flow (HFSM), and complex schedules of SDF actor firing. This makes it hard to hide configuration latency efficiently with compile-time static configuration scheduling. To resolve the problem, it is necessary to know the exact order of required configurations during runtime and to perform runtime configuration scheduling. To obtain the exact order of configurations, we exploit the inherent property of HFSM-SDF that the execution order of SDF actors can be determined before executing the state transition of top FSM. After obtaining the order information and storing it in the ready configuration queue (ready CQ), we execute the state transition. During the execution, whenever there is FPGA resource available, a new configuration is selected from the ready CQ and fetched by the runtime configuration scheduler. We applied the method to an MPEG4 decoder and IS95 design and obtained up to 21.8% improvement in system runtime with a negligible overhead of memory usage.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.550-556
• /
• 2005

Tooth impaction is defined as a cessation of the eruption of a tooth at the level of the oral mucosa or alveolar bone by any causes. Any tooth in the dental arch can be impacted, but the teeth frequently involved in a descending order are the mandibular and maxillary third molars, the maxillary canines, the mandibular and maxillary second premolars, and the maxillary central incisors. In these teeth, impaction of maxillary incisor occurs in about 0.1-0.5% and major causes are trauma, supernumerary teeth and periapical inflammation of primary maxillary incisor. Delayed eruption of a maxillary central incisor results in midline shift, the space's being occupied by an adjacent tooth and different levels of alveolar height. Treatment options are observation, surgical intervention, surgical exposure and orthodontic traction, transplantation and extraction. These cases were about the patients with delayed eruption of maxillary central incisor. We surgically exposed impacted tooth and guided it into normal position by the orthodontic traction. At the completion of traction, the maxillary central incisor was positoned fairly within the arch and complications such as root resorption were not observed.

• Journal of Wetlands Research
• /
• v.17 no.4
• /
• pp.428-435
• /
• 2015

Constructed wetlands (CWs) have been accepted as an attractive and economic alternative to a variety of pollution control and provided potentially valuable wildlife habitat in urban and suburban areas, as well as esthetic value within the local natural environment. CWs are known eco-friendly technology to solve the problem of the climate change and urbanization issues. Numerous studies have been published on the various aspects of a CW. However, there are current limitations about the CW operations such as few design guidelines, poor performance results regarding the simple construction. Therefore, the objective of this research was to suggest an appropriate design and maintenance guidelines for a CW by thorough investigation of site monitoring results. The research also concentrated in redefining and reclassifying CWs, based on literatures made by the Ministry of Environment (MOE) and other organizations. Investigation at 43 CWs in Korea was performed by using collected data and by performing site survey from 2013 to 2014. Based on the results, the best practices among the investigated CWs provided water treatment, wildlife habitat, environmental education, and leisure. Also these CWs conducted a regular maintenance such as vegetation, sediment dredging and cleaning of facilities. Results obtained are intended for use by academics and any organizations involved in CW management.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.11
• /
• pp.846-850
• /
• 2009

Recently, wireless sensor networks have found their way into a wide variety of applications and systems with vastly varying requirements and characteristics such as environmental monitoring, smart spaces, medical applications, and precision agriculture. The sensor nodes are battery powered. Therefore, the energy is the most precious resource of a wireless sensor network since periodically replacing the battery of the nodes in large scale deployments is infeasible. Energy efficient mechanisms for gathering sensor readings are indispensable to prolong the lifetime of a sensor network as long as possible. There are two energy-efficient approaches to prolong the network lifetime in sensor networks. One is the compression scheme to reduce the size of sensor readings. When the communication conflict is occurred between two sensor nodes, the sender must try to retransmit its reading. The other is the MAC protocol to prevent the communication conflict. In this paper, we propose a novel approaches to reduce the size of the sensor readings in the MAC layer. The proposed scheme compresses sensor readings by allocating the time slots of the TDMA schedule to them dynamically. We also present a mathematical model to predict latency from collecting the sensor readings as the compression ratio is changed. In the simulation result, our proposed scheme reduces the communication cost by about 52% over the existing scheme.