• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1109-1116
• /
• 2010

In this paper, some performance characteristics of VoIP(Voice over Internet Protocol) for MANET(Mobile Ad-hoc Networks) with simulation is studied and appropriate condition for implementation of VoIP service is suggested. VoIP simulator is implemented with NS(Network Simulator)-2. VoIP traffic for simulation is generated with some codecs of G.711, G.723.1, G.726-32, G.729A, GSM.AMR and iLBC. As simulation results for traffic transmission under $670{\times}670m$ 50node MANET environment, performance data for MOS(Mean Opinion Score), network delay, packet loss rate and transmission bandwidth are measured. Normalized analysis about measured results shows that maximum VoIP connection satisfying VoIP service quality condition is 15.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.23-28
• /
• 2021

In recent years, research on smart factory wireless mobile communication technology that wirelessly remotely controls utilities is being actively conducted. The Wi-SUN(Wireless Smart Utility Network) Alliance proposed Wi-SUN protocol structure suitable for building a platform such as a smart factory as a new wireless communication standardization standard based on EEE802.15.4g/e. It analyzes the performance of the IEEE802.15.4e CSL(Coordinated Sampled Listening) Mode MAC(Media Access Control) in terms of latency and looks at considerations for efficient operation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1061-1070
• /
• 2009

In this paper, we have designed TDL(True-time Delay Line) for eliminating beam-squint occurring in active phased array antenna with large electrical size operated in wide bandwidth, and have tested its electrical performance. The proposed TDL device is composed of 4-bit microstrip delay line structure and MMIC amplifier for compensation of the delay-line loss. The measured results of gain and phase versus delay state satisfy the electrical requirements, also P1dB output power and noise figure meet the requirement. To verify the performance of fabricated TDL, we have simulated the beam patterns of wide-band active phased array antenna using the measured results and have certified the beam pattern compensation performance. As a result of simulated beam pattern compensation with respect to the 675.8 mm size antenna which is operated in X-band, 800 MHz bandwidth, we have reduced the beam squint error of ${\pm}1^{\circ}$ with ${\pm}0.1^{\circ}$. So this TDL module is able to be applied to active phase array antenna system.

• Journal of Korea Multimedia Society
• /
• v.13 no.2
• /
• pp.279-286
• /
• 2010

Unbalanced traffic load offered to the nodes making up a path in the network guaranteeing quality-of-service has been known as a main cause deteriorating the capability of the path in admitting traffic flows. Several path load balancing methods have been developed to resolve this problem which used a feedback control scheme that adjusts the delay budget of a flow allocated to each node according to the conditions of available resource in the path. Because of no consideration about the probabilistic characteristics of the service quality, it is impossible for them to prevent in advance a bottleneck on the path which leads to a native restriction in the improvement of the capability being deteriorated. This paper proposes a preventive intra-path load balancing method applicable to the RSVP system which is based on the probabilistic characteristics of the quality-of-service of the offered load. The results of the simulation of the proposed method on a simple evaluation network showed that it provides the gain of 4~22% compared to the legacy one in terms of the number of admitted flows.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.12-19
• /
• 2016

The monitoring system in railway is under study to forecast any derailment and accident by defect of train. Because the monitoring system is composed of wireless sensor network based on ZigBee-communication between inside and outside of train, the study for wireless channel analysis is required. Especially, if multipath delay profile exist in the channel, the equalizer and channel estimator can be required for preventing receiver performance degradation. Therefore, we analyzed the wireless channel in train environment using measured data and, proposed the channel estimation method through the characterisitic of chip code, under the consideration of the channel characteristics in train. To show the performance of proposed method, we demonstrate the performance by mean square error(MSE), computational complexity and bit error rate(BER).

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.102-110
• /
• 2023

The MATS(Missile Assembly Test Set) is manufactured and used to check the function of the missile during the period of development for the guided missile system, and the requirements for power and communication are managed for equipment production. The MATS developer implements software according to the proposed communication standard to guarantee the reliability of the data that communicates with the guided missile. The test bed is built and self-performance evaluation is performed after implementation. And the verification process is performed using the standard equipment. The characteristics of periodic delay for data transmission must be reflected when building a test bed. This paper describes a test bed construction method for data processing with periodic delay. Also This paper compares and evaluates the performance by changing the previously designed algorithm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.3
• /
• pp.8-15
• /
• 2010

Due to the increasing demand of network convergence, in future, hybrid/integrated satellite and terrestrial systems will play an important role. In that case, compatibilities between the satellite and terrestrial systems are very important for efficiency of the systems. 3GPP Long Term Evolution (LTE) is one of the most powerful candidates of the 4G system Therefore, in this paper, we introduce the design of interleaver for mobile satellite system based 3GPP LTE specification. The 4G system including the LTE specification adopted adaptive modulation and coding (AMC) schemes for efficient usage of resources, and the updating interval of resource allocation is an order of msec. However, because of the long round trip delay of satellite systems, we cannot employ the same AMC scheme specified for the terrestrial system, and thus it cannot effectively counteract to short term fadings. Therefore, in order to overcome these problems, we propose an interleaver scheme combined with AMC. We present the interleaγer design results considering mobile satellite system based on the LTE and analyze the simulation results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.372-378
• /
• 2002

In this paper, a narrow-band waveguide channel fitter has been designed and realized for Ku band satellite transponder. Group-delay and amplitude variations of the channel filter have been minimized using a 2-pole reflection type equalizer. The channel filter has been designed to have the 8-pole elliptic response for high frequency selectivity. Dual-mode technique has been adopted for reducing mass and volume of the channel filter and equalizer. The channel filter and equalizer have shown good performance for satellite transponder.

• Journal of Korea Multimedia Society
• /
• v.7 no.2
• /
• pp.194-203
• /
• 2004

In this paper we propose a Mobile Petri-net Model (MPM) as a new specification model including the QoS parameter that minimizes the transmission delay time. In MPM, we propose a playing time algorithm for supporting the seamless presentation and the smooth playing. The proposed model has a higher guarantee of QoS such as playing time than the previous work.

• Geophysics and Geophysical Exploration
• /
• v.13 no.3
• /
• pp.277-285
• /
• 2010

For regional earthquakes in the Korean Peninsula, the seismic Lg waves have the largest amplitude. Our researches in South Korea found that more reasonable low ${Q_{Lg}}^{-1}$ was obtained as the inter-station distances increase. The other methods such as coda normalization method and multiple lapse time window method also produced that the low ${Q_{Lg}}^{-1}$ is related to the values of seismically inactive region.