• Korean Journal of Poultry Science
• /
• v.38 no.2
• /
• pp.89-96
• /
• 2011

The outbreak of Newcastle disease occurred for the first time at a commercial chicken farm near Ulaanbaatar, Mongolia in August 2010. Newcastle disease virus (NDV) obtained from infected chickens in Mongolia was characterized by biological and molecular biological approches. Mongolian NDV isolate killed all of chicken embryos within 60 h in the mean death time assay, indicating virulent for chicken. A genomic region of 695 nts between nts 1055 of the M gene and 508 of the F gene was amplified by RT-PCR and sequenced. The deduced amino acid sequence of the F protein cleavage site was $^{112}RRQKRF^{117}$, which is a typical sequence of velogenic strains of NDV and is agreement with the result of the MDT assay. The sequence of the partial F gene (nts 47 to 435) was used for genotyping by phylogenetic analysis. The phylogenetic analysis showed that the Mongolian isolate was of genotype VII within class II of NDV. Further phylogenetic analysis on the genotype VII strains revealed that the isolates placed in a genetic sublineage of VIId and most closely related with velogenic strains of NDV circulating in Far-east Asian region especially China, suggesting the introduction of velogenic NDV into Mongolia from neighboring countries.

• Korean Journal of Agricultural Science
• /
• v.34 no.1
• /
• pp.37-46
• /
• 2007

This study was conducted to investigate the antler induction rate and production by artificial induction of antlerogenesis using $CaCl_2$ injection on both periosteum around area of horn development for the frontal bone of a female elk deer which do not have an antler. The results obtained from eleven deers for verifying effect of the female's antler induction on reproduction are as follows: The antler development induction by $CaCl_2$injection is higher on the treatments of 30 and 50% of $CaCl_2$ injection than those on the treatments of 15 %. The antler production is higher on the 30 % $CaCl_2$ injection than those of 15 and 50 % $CaCl_2$ injection. For 30 % $CaCl_2$ injection, the antler production is higher in 1.5 and 2.0 ml of % $CaCl_2$ injection than the other injection level. After the induction of antler development, the birth rate is not changed as of 75~100 %, while the regeneration rate of the antler which was not constant in approximately 45 % for five among eleven female deer. With these results, we assume that the injection concentration and amount of $CaCl_2$ injection are around 30 % and 1.5 and 2.0 ml level which can be not only most effective conditions for the antler induction rate and production, but also these conditions do not influence the reproduction during the period of the female elk's antler development induction.

• Korean journal of applied entomology
• /
• v.27 no.1
• /
• pp.28-34
• /
• 1988

Henosepilachna vigintioctomaculata (Motschulsky) (Coleoptera: Coccinellidae), important pests of agricultural crops in Korea, including eggplant and potato, were collected in the Kyonggido area each summer from 1983 to 1986. Data were recorded for rates of parasitism against each host stage and seasonal activity. The parasitoids NothoserPhus afissae (Watanabe), (Hymenoptera: Proctotrupidae), Uga menoni (Kerrich), (Hymenoptera: Cha1cididae), and Pediobius foveolatus (Crawford), (Hymenoptera: Eulophidae) were reared from the host insects. A solitary larval parasitoid, N. afissae, was reared from 2nd to 4th instar brval hosts, with parasitism being highest in the 3rd instar collection. U. menoni, a solitary larval-pupal parasitoid, was reared from 3rd instar larvae to pupae, and parasitism was highest in the pupal collection. N. afissae and U. menoni occurred during June to September. N. afissae showed relatively high parasitism during the entire study period as compared with other species, while parasitization by U. menoni was highest in July. P. foveolatus, a gregarious larval parasitoid, did not generally appear until September, although it appeared in early August in the southern part of Korea. The number of P. foveolatus emerging from a mummy varied, ranging from 7 to 26 (mean = 13. 8).

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.30-38
• /
• 2017

In this paper, we propose an underwater acoustic sensor fault detection method for passive sonar systems. In general, a passive sonar system displays processed results of array signals obtained from tens of the acoustic sensors as a two-dimensional image such as displays for broadband or narrowband analysis. Since detection result display in the operation software is to display the accumulated result through the array signal processing, it is difficult to determine the possibility where signal may be contaminated by the fault or failure of a single channel sensor. In this paper, accordingly, we propose a detection method based on the analysis of RMSCR (Root Mean Square Crossing-Rate), and the processing techniques for the faulty sensors are analyzed. In order to evaluate the performance of the proposed method, the precision of detecting fault sensors is measured by using signals acquired from real array being operated in several coastal areas. Besides, we compare performance of fault processing techniques. From the experiments, it is shown that the proposed method works well in underwater environments with high average RMS, and mute (set to zero) shows the best performance with regard to fault processing techniques.

• The Korean Journal of Mycology
• /
• v.18 no.3
• /
• pp.149-157
• /
• 1990

Five strains of Armillaria mellea were collected from the forest of Chonbuk province and isolated from the tissue of fruit bodies. Nutritional and environmental characteristics of mycelial cultivation and rhizomorph production of Armillaria mellea isolated were determined in sawdust media, woody inocula and soils. The sawdust media of Styphnolobium japonicum, Culhamia simplex, Populus monilifera and Populua davidiana were proper for mycelial growth. The ranges of optimum pH, temperature and moisture content for mycelial growth were in the range of $4.5{\sim}5.0$, ${\sim}25^{\circ}C$ and $65{\sim}70%$, respectively. Among the various additives and inorganic salts added, 10% rice bran and 3% $CaCO_3$ were effective to mycelial growth. The woody inocula of Styphnolobium japonicum, Culhamia simplex, Quercus acutissima and Quercus veriabilis were proper for rhizomorph production. The ranges of optimum pH, moisture content and temperature for rhizomorph production were in the range of $4.5{\sim}4.9,$ $45{\sim}55%\;(w/w)$ and $20{\sim}24^{\circ}C$, respectively. Distribution of rhizomorphs in soil was varied with depth, but the main concentration occurred in the range of $7.5{\sim}12.5\;cm$. They were rarely found below 25.0 cm.

• Resources Recycling
• /
• v.25 no.3
• /
• pp.55-62
• /
• 2016

Steel structures exposed to extremely corrosive environment like marine environments and industrial area are generally manufactured by applying various protection treatment to increase their lifetime. Metal spraying is one of the protection methods to overcome some drawbacks of the widely employed technologies. Therefore, lots of research needs to be done to improve the corrosion resistance of steel structures. In this study, the corrosion resistance of steel structures was evaluated with the variation in the type and thickness of metal spray by measuring the corrosion potential and current density. As a raw material for spraying, Zn, Al and their mixture were employed to obtain coating thickness of $30{\sim}100{\mu}m$. Our data indicated that the pure zinc coating with $100{\mu}m$ showed the lowest corrosion potential. In the case of pure Al and Zn 85%-Al 15%, the corrosion potential and current density was decreased compared to pure zinc. It was found that the corrosion potential was decreased with the increase of coating thickness irrespective of the type of the coating.

• Korean Journal of Food Science and Technology
• /
• v.40 no.2
• /
• pp.160-165
• /
• 2008

This study was conducted to analyze sensory profiles of commercial sojues using a standardized sensory evaluation procedure, and to investigate the effects of sensory characteristics and brands on consumer liking for soju. Descriptive analysis and consumer taste testing were conducted for seven commercial sojues. For the descriptive analysis, eight panelists generated and evaluated 12 flavor and one pain-sensation attributes for the soju, and there were significant differences among the soju samples for all the 13 sensory attributes. For the descriptive data, principal component analysis was performed to summarize the sensory characteristics of the sojues. For the consumer testing, 224 soju drinkers (20-29 year-olds) were recruited and randomly divided into two groups; a blind group and a group with the knowledge of brand. While the hedonic ratings obtained from the blind group didn't indicate significant differences among the sojues, the ratings obtained from the brand-informed group showed significant differences. Finally, the individual preferences of the 112 consumers in each group were investigated by preference mapping techniques.

• Journal of the Economic Geographical Society of Korea
• /
• v.24 no.3
• /
• pp.283-299
• /
• 2021

As the intelligent revolution triggered by digital technology, unmanned vehicles such as self-driving cars, robots, and drones appeared, which brought about innovative changes in the industry. Gyeonggi Local government has established both an ordinance and a basic plan regarding unmanned vehicles. It is time to prepare a data-based policy by understanding the current state of the unmanned vehicle industry in the province. As a result of the survey, the unmanned vehicle industry in Gyeonggi Province is 25% of the nationwide, and more than 88% is concentrated in the southern part of Gyeonggi Province. The land sector such as the robot and autonomous vehicles are focused on 71.4% and the aviation sector such as drones are 26.7%. However, unmanned vehicle companies in Gyeonggi-do are mostly small-sized businesses with less than 10 years of experience and are in the stage of introduction and growth level. They have a plan to improve technology through continuous R&D by hiring human resources. Therefore, Gyeonggi-do needs to consider policy support for sustainable growth of start-up and small enterprises and for fostering professional manpower and technical skills as well as for establishing an unmanned vehicle industry network to create, share, and spread knowledge.

• Journal of Plant Biotechnology
• /
• v.47 no.4
• /
• pp.261-272
• /
• 2020

Approvals for cultivation and import of genetically modified (GM) crops have dramatically increased around the world. Comparative compositional studies are an important aspect of safety assessments of products from GM crops and are based on substantial equivalence. Compositional analyses focus on determining similarities and differences between the compositions of the GM crops and their conventional counterparts, and thereby assessing the compositional equivalence of GM crops and their conventional comparators. The analytes, such as major constituents, key nutrients, and antinutrients, are generally determined on a crop-specific basis according to the OECD consensus document. The use of standard methods throughout the processes, such as selection of comparators, field trials, analytical methods, and statistical data analysis, is crucial. In this study, we showed the general framework of compositional studies. Literature for compositional studies of GM crops conducted abroad and in Korea was reviewed to obtain information about analytes, conventional counterparts, cultivation year, location, and statistical methods. The studies conducted abroad assessed for commercial release of GM crops such as soybean, maize, and cotton, while domestic studies were mainly performed for research in rice. In addition, we suggested a guidance for conventional comparators and field trials applicable to the domestic situation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.6
• /
• pp.308-320
• /
• 2021

An integrated sediment management approach that includes the recovery of the amount of declined sediment supply is effective as a fundamental solution to coastal erosion. During planning, it is essential to analyze the transfer mechanism of the sediments generated from estuaries (the junction between a river and sea) to assess the amount and rate of sediment discharge (from the river to sea) supplied back to the coast. Although numerical models that interpret the tidal sand bar flushing process during flooding have been studied, thus far, there has been no study focusing on the formation and development processes of tidal sand bars. Therefore, this study aims to construct wave deformation, flow regime calculation, and topographic change analysis models to assess the amount of recovered sediment discharge and reproduce the tidal sand bar formation process through numerical analysis for integrated littoral drift management. The tidal sand bar formation process was simulated, and the wave energy and duration of action concepts were implemented to predict the long-term littoral movement. The river flux and wave conditions during winter when tidal sand bars dominantly develop were considered as the external force conditions required for calculation. The initial condition of the topographic data directly after the Maeupcheon tidal sand bar flushing during flooding was set as the initial topography. Consequently, the tidal sand bar formation and development due to nearshore currents dependent on the incident wave direction were reproduced. Approximately 66 h after the initial topography, a sand bar formation was observed at the Maengbang estuary.