• Journal of the Korean earth science society
• /
• v.31 no.6
• /
• pp.600-607
• /
• 2010

In 2008, multiple episodes of large-scale transport of natural airborne particles and anthropogenically affected particles from different sources in the East Asian continent were identified in the National Oceanic and Atmospheric Administration (NOAA) satellite RGB-composite images and the mass concentrations of ground level particulate matters. To analyze the aerosol size distribution during the large-scale transport of atmospheric aerosols, both aerosol optical depth (AOD; proportional to the aerosol total loading in the vertical column) and fine aerosol weighting (FW; fractional contribution of fine aerosol to the total AOD) of Moderate resolution Imaging Spectroradiometer (MODIS) aerosol products were used over the East Asian region. The six episodes of massive natural airborne particles were observed at Cheongwon, originating from sandstorms in northern China, Mongolia and the loess plateau of China. The $PM_{10}$ and $PM_{2.5}$ stood at 70% and 16% of the total mass concentration of TSP, respectively. However, the mass concentration of $PM_{2.5}$ among TSP increased as high as 23% in the episode in which they were flowing in by way f the industrial area in east China. In the other five episodes of anthropogenically affected particles that flowed into the Korean Peninsula from east China, the mass concentrations of $PM_{10}$ and $PM_{2.5}$ among TSP reached 82% and 65%, respectively. The average AOD for the large-scale transport of anthropogenically affected particle episodes in the East Asian region was measured at $0.42{\pm}0.17$ compared with AOD ($0.36{\pm}0.13$) for the natural airborne particle episodes. Particularly, the regions covering east China, the Yellow Sea, the Korean Peninsula, and the east Korean sea were characterized by high levels of AOD. The average FW values observed during the event of anthropogenically affected aerosols ($0.63{\pm}0.16$) were moderately higher than those of natural airborne particles ($0.52{\pm}0.13$). This observation suggests that anthropogenically affected particles contribute greatly to the atmospheric aerosols in East Asia.

• Journal of the Korean earth science society
• /
• v.32 no.4
• /
• pp.388-401
• /
• 2011

Asian dust was observed a total of 66 times in the springtime during the period from 2002 to 2010, with 26 cases in March, 23 cases in April and 17 cases in May. This study investigates a Asian dust episode that occurred during the period from 22 to 25 May 2010, based on synoptic weather patterns, wind vector at 850 hPa, relative humidity at 1000 hPa, Jet streams and wind vector at 300 hPa, PM10 concentration in Korea and satellite imagery. In this case, Asian dust originated on 22 May along the rear of a developing low pressure system in Mongolia. The Asian dust was then transported southeastward and bypassed the Korea peninsula from 23 to 24 May, before reaching Japan on 25 May. Jet streams on 24 May bypassed the Korean peninsula and induced the development of a surface low pressure centered over the peninsula. The resulting air flow was critical to the trajectory of the Asian dust, which likewise bypassed the Korean peninsula. 72-hour backward trajectory data reveal that the Shandong Peninsula and the East China Sea were the points of origin for the air flows that swept through the Japanese sites where Asian dust was observable to the naked eay. The Asian dust pathway is ascertained by horizontal distribution of the Asian dust of RGB imagery from MODIS satellites which captured the Asian dust moving over the Shandong Peninsula, the East China Sea, and northwest of the Kyushu region in Japan. Since the synoptic pattern and the transport way of the Asian dust case are far from typical ones, which Asian dust forecasting technique has long been based on, this study can be good example of exceptional Asian dust pattern and it will be used for more accurate Asian dust forecasting.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5525-5533
• /
• 2012

Because of ultra-high buildings or deeper underground space, recent buildings have the potential that people who have lack of physical strength collapse before arriving at the emergency exits when catastrophes occur. In case of fire, the way to escape is that first, people take the stairs of the adjacent areas and then use the elevator to the remaining distance by road to escape notice or be safe. For this reason, the skyscrapers guidelines of Seoul for information on the elevator for evacuation has been established. Nevertheless, when designing buildings to install a elevator for evacuation separately is not effective, so passenger elevators installation according to the criteria are encouraged to use as evacuation elevators. However, this does not include detailed design guidelines so far. Therefore, this study was to investigate design method to use the passenger elevator for evacuation according to the domestic law and international installation criteria, and to calculated number of lifts and refuge to use the elevator using by the ELVAC+ and PathFinder evacuation program.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.215-220
• /
• 2013

In this paper, the signal reception environment of the satellite communications was analyzed on urban, suburban and rural environment. The correct analysis of received environment is very important in the satellite communications because the presence of various attenuation factors. Analyze attenuation factor through the simulation and that apply to each receiving environment. The urban and suburban various received sensitivity is determined according to building height and density. Moreover, attenuation occurs in rural areas due to the mountainous and vegetation. In this paper, we analysis of variety receiving environment according to movement of the ground station and the satellites can be utilized to provide stable multimedia services.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.25-28
• /
• 2015

Lifts are used as an essential means of transportation within the building in an emergency situation, when used as a means of escape, so expect a lot of research has been conducted high effect. Number of stories in the Seoul-rise building guidelines underground 7th floor, 53 ground floor, floor area $6,800m^2$, floor area $127,050m^2$, use is cultural and convention facilities and sales facilities, business facilities and accommodation (hotel), the construction of public housing (apartments) hagieneun not efficient to install elevators for evacuation mothada was determined separately in designing the lift is designed according to the standards of passenger lifts installed under a judgment as to use for evacuation. However, this does not include detailed design guidelines so far.[1] We propose the Evacuee Guidance of Elevator System that can be used as entering air equipment, sprinkler and smart phone evacuation system.

• Journal of Korea Water Resources Association
• /
• v.50 no.1
• /
• pp.1-15
• /
• 2017

Information on radar rainfall with high spatio-temporal resolution over large areas has been used to mitigate climate-related disasters such as flash floods. On the other hand, a well-known problem associated with the radar rainfall using the Marshall-Palmer relationship is the underestimation. In this study, we develop a new bias correction scheme based on the quantile regression method. This study employed a bivariate copula function method for the joint simulation between radar and ground gauge rainfall data to better characterize the error distribution. The proposed quantile regression based bias corrected rainfall showed a good agreement with that of observed. Moreover, the results of our case studies suggest that the copula function approach was useful to functionalize the error distribution of radar rainfall in an effective way.

• Journal of Broadcast Engineering
• /
• v.11 no.3 s.32
• /
• pp.302-310
• /
• 2006

ITU-R B.O. 1130-4 Digital System E adopted for Korean satellite DMB service is a multimedia broadcasting system based on DS-CDM-QPSK technique which broadcasts audio and video contents via the satellite or terrestrial gap-filler. However, Digital System E can not provide full loading services because the multi-channel interference (MCI) is increased due to the loss of orthogonality between signature waveforms in multipath fading channels. In this paper a chip equalizer using tap selection algorithm that enhances the receiving performance is proposed and compared to the conventional rake receiver for the satellite DMB system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.8
• /
• pp.599-607
• /
• 2018

This paper presents a ground-to-air bistatic radar system and its implementation algorithm, which resembles an SAR(synthetic aperture radar) reconstruction algorithm. Via cooperative working between a standoff transmitting radar and an array of ground based receiving radars, it detects and images moving targets under clutter in the air. In the proposed system, the whole receiving antenna aperture is synthesized by physical ground based radars, and thus, unlike conventional SAR, it does not require long illumination time of the target area. The reconstruction algorithm uses planewave approximation based polar format processing, which alleviates the requirement of positioning the receiving radars, which can cause grating lobes if not chosen properly. We derive a reconstruction algorithm including clutter suppression and discuss implementation issues, such as the resolution of a reconstructed image and the method of compensation for the irregularity of the receiving radars' positions. A simulation that validates the proposed algorithm is also shown.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2011

The objective of this paper is to improve the accuracy of the 3D geopositioning extracted from Rational Polynomial Coefficient(RPC) provide in the KOMPSAT-2 metadata files. In this paper, we developed the algorithm to adjust a RFM(Rational Functional Model), and could improve the accuracy of a RFM with this algorithm. Furthermore, when a RFM was adjusted with this algorithm, the effects of the number of GCPs on the accuracy of the adjusted RFM was tested. For accuracy assessment using adjusted RFM, 9 ground control points(GCPs) and 24 check points could be used. Results indicated that the root mean squared errors(RMSEs) of horizontal residual errors calculated 24 check points were 2.20(m). The achieved accuracy of three dimensional object-point determination was 1.72(m) in the X-dimension and 1.37(m) in the Y-dimension and 2.20(m) in the Z-dimension.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.313-323
• /
• 2016

Recently, "Cadastral Confirmation Surveying" has been established to promote efficiently and systematically its work. To do so, it is necessary that cadastral control point should be set up and transverse grid coordinates should be determined for high accuracy and boundary restoration based on the cadastral control point. This study expects the potentially institutional problem of detail surveying and the limitation of Network-Real Time Kinematic, introduced to measure the cadastral control point first in the issued regulation, and thus presents the improvement and the management of the block boundary of larger parcel as solutions. This can be applied promptly, when the location difference of ground and border, registered in cadastral record for quake and others, occurs. Thus, the public confidence of cadastral record may become higher and relevant social costs get reduced by the advanced prevention effect of boundary dispute, which represents much to the management of cadastral institution. Provided cadastral confirmation surveying is implemented with the management of the block boundary of larger parcel, proposed in this study.