• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1142-1148
• /
• 2006

Actually, a present traffic accident detection system is subsisting limitation of accurate distinction under the crowded condition at intersection because the system depend upon mainly the image information at intersection and digital image processing techniques nearly all. To complement this insufficiency, this article aims to estimate the level of present technology and a realistic possibility by analyzing the acoustic characteristic of crash sound that we have to investigate fur improvement of traffic accident detection rate at intersection. The skid sound of traffic accident was showed the special pattern at 1[KHz])$\sim$3[KHz] bandwidth when vehicles are almost never operated in and around intersection. Also, the frequency bandwidth of vehicle crash sound was showed sound pressure difference over 30[dB] higher than when there is no occurrence of traffic accident below 500[Hz].

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.10
• /
• pp.962-974
• /
• 2010

Recently, the convergence of information technology with bio-technology, nano-technology or other technologies has been creating a new paradigm. In a field of transportation, the intelligent transport systems which is a convergence of intelligent technologies and transportation systems have been studied. The Variable Speed Limit(VSL), is one of ITS technologies, is thought to improve safety and efficiency of transportation while controlling speed limit based on road conditions. Legacy studies have considered only one station for VSL algorithm. However, it is not appropriate for an urban freeway installed with many stations. In this paper, new algorithm is proposed to not only enhance effectiveness of VSL based on cooperation of stations but also reflect road conditions within 30 seconds. The proposed algorithm consists of 4 steps: the first is a "searching bottleneck station" step, the second is a "calculating a size of congestion" step, the third is a "calculating the number of controlled stations" step, the final is a "calculating VSL" step. This algorithm guarantees improved safety and minimum additional travel time. The travel time should be considered because drivers would against the VSL algorithm when the proposed algorithm occurs additional travel time. In our experiments, microscopic traffic simulator VISSIM is selected to perform a modeling work. The results show that proposed algorithm provides the improved safety and minimum increase of travel time.

• Spatial Information Research
• /
• v.14 no.1 s.36
• /
• pp.95-113
• /
• 2006

The standardization of Intelligent Transport Systems(ITS) technique should secure a interoperability among the different softwares or hardwares on ITS service. The domestic standard research takes the advantage of a preoccupation on the world ITS market through the international standard(IS) reflecting the domestic technique. The objective of this research focused on the database technology for ITS is to introduce the domestic standard activity for adopting ISs and the current interior corresponding situation against ISs. The first step, we analyze the international standardization action through gathering and investigating the up-to-date issues and documentations focused on ISO/TC204 WG3. And then, we look into the domestic situation about TTA ITS PG 310 and ITS Korea. consequently, a synthetic view, we have analyzied, how interior standard corresponds with the international standards, and how the standard establishing process is being done. The expectation of this research is to help understanding the up-to-date domestic/international standardization and the situation of the standard action related with the database technology for ITS. Also, we take advantage of this result to encourage the international competitiveness on ITS market.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.2
• /
• pp.29-36
• /
• 2004

The purpose of this study is to analyze DMB(digital multimedia broadcasting) technologies of transmitting GIS-based traffic information for developing DMB systems compared with FM DARC(FM data radio channel). R&D and standardizations for transmitting GIS-based traffic information have been rapidly changed, as radical developments in ITS(intelligent transportation systems), telemaics, and communication methods such as ubiquitous and convergences of broadcasting and communications. Each communication method employs different GIS format, protocol, and standardizations, i.e., GML(geography markup language) and TPEG(transport protocol experts group). This paper presents technical methods and trends of transmitting traffic information using broadcasting along with FM DARC, in general, and DMB, in particular.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.4
• /
• pp.1-13
• /
• 2023

This study develops an optimal mobile-communication-based National Highway traffic volume estimation model using an ensemble-based machine learning algorithm. Based on information such as mobile communication data and VDS data, the LightGBM model was selected as the optimal model for estimating traffic volume. As a result of evaluating traffic volume estimation performance from 96 points where VDS was installed, MAPE was 8.49 (accuracy 91.51%). On the roads where VDS was not installed, traffic estimation accuracy was 92.6%.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.1 s.5
• /
• pp.37-48
• /
• 2001

ITS includes an Advanced Traveler Information System(ATIS) that provides travelers with service and facility data for the purpose of assisting prior to embarking on a trip or after the traveler is underway. ATIS consists of three major subsystems, which are a Pre-trip Traffic Information subsystem(PTIS), an En-route Traffic Information Subsystem(ETIS), and a Dynamic Route Guide Subsystem(DGIS). ATIS needs to be designed and implemented in accordance with the National ITS Architecture, a reference framework that spans all of standards activities. Recently, as software technology is rapidly improved and stabilized, there are some needs to reuse pre-developed and powerful ITS technology. ITS standardization based on components and open interfaces becomes a way to solve these reusability of current ITS technology. This paper focuses on how could we design and implement ATIS based on the component with the aid of UML(Unified Modeling Language). The UML methodology is expected to provide a standardized model for newly developed ITS components.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.469-472
• /
• 2022

With the recent development of intelligent transportation systems, various technologies applying deep learning technology are being used. To crackdown on illegal vehicles and criminal vehicles driving on the road, a vehicle type classification system capable of accurately determining the type of vehicle is required. This study proposes a vehicle type classification system optimized for mobile traffic control systems using YOLO(You Only Look Once). The system uses a one-stage object detection algorithm YOLOv5 to detect vehicles into six classes: passenger cars, subcompact, compact, and midsize vans, full-size vans, trucks, motorcycles, special vehicles, and construction machinery. About 5,000 pieces of domestic vehicle image data built by the Korea Institute of Science and Technology for the development of artificial intelligence technology were used as learning data. It proposes a lane designation control system that applies a vehicle type classification algorithm capable of recognizing both front and side angles with one camera.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.62-65
• /
• 2010

ITS(Intelligent Transportation System) is in order to better operate the public transportation. The thesis purpose to introduce how does city buses and underground vehicles input in server-side controls to connecting these two parts, that achieve share information between them. Ready provision of reliable, up-to-date and accurate transport information contributes towards efficient road use, better traffic flow, greater road safety and improved accessibility and promote efficiency in the city.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4D
• /
• pp.499-507
• /
• 2009

A median barrier in the road is to separate driver and passenger the traffic flow in the 4-line over highway. In order to keep thee safety of and minimize the traffic jam in the traffic accidents, the ubiquitous intelligent median barrier system is proposed in this paper. This system is required to develop the sensor node fields in the median barrier, which detects the traffic accident using vibration sensors and wireless communication network. Free space test to sensing & receiving radio frequency, verification of middleware to report and countermeasure the accident intelligently to police and hospital are carried out.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.261-264
• /
• 2006

지능형 차량정보 시스템은 21세기 교통체계로 기대를 모으고 있는 ITS(Intellligent Transport System)의 구축에 핵심이 되는 시스템이다. 이러한 시스템을 구현하기 위해서 종래의 네비게이션, 차량용 무선통신, 차량진단 등의 단일화된 시스템을 통합적으로 수행하며, 계측 또는 수집된 데이터를 분석하여 지능적으로 차량의 주행 상태를 분석 / 진단함으로써 차량에서의 안전한 운행과 운전자 및 승객들이 요구하는 정보 또는 다양한 서비스를 제공하기 위한 새로운 모듈의 개발이 절실히 필요한 실정이다. 따라서, 본 논문에서는 CAN(Controller Area Network) BUS을 이용한 차량의 상태수집 모듈과 능동 데이터베이스에 관해 기술하고 이를 통합하기 위한 임베디드 보드를 이용한 CAN BUS연계형 차량용 복합통신모듈의 프로토타입 H/W을 구성하여 실용화 가능성 및 유용성을 제시하고자 하였다.