• Korean Journal of Psychosomatic Medicine
• /
• v.23 no.1
• /
• pp.57-65
• /
• 2015

Objectives:Within the normal reproductive cycles of women, dramatic fluctuations of sexual hormones occur in the premenstrual and menopausal periods. In both periods, women are vulnerable to mood disturbances and show several somatic complaints. Based on these common clinical profiles and physiological changes, a relationship between vasomotor symptoms and the premenstrual syndrome has been suggested. However, attempts to establish such a link have yielded inconclusive results. The purpose of this study was to investigate the association between histories of premenstrual syndrome and menopausal vasomotor symptoms within different menopausal stages. Methods:This cross-sectional study recruited Korean women aged 45-64 years who were perimenopausal and postmenopausal from 16 branch offices of the Korean Association of Health Promotion. All subjects completed self-report questionnaires that asked about a history of premenstrual syndromes, vasomotor symptoms, and several other variables. Results:A total of 1054 participants(361 perimenopausal women and 693 postmenopausal women) completed the study. Severity of premenstrual symptoms significantly correlated with postmenopausal vasomotor symptoms, only in late perimenopausal(r=0.213, p=0.010) and early postmenopausal women(r=0.246, p<0.001). After adjusting for several factors related to vasomotor symptoms, a history of premenstrual syndrome was a significant predictor of moderate to very severe vasomotor symptoms in late perimenopausal(OR=5.197, p=0.005) and early postmenopausal women(OR=3.017, p=0.010). Conclusions:This study suggests that a history of premenstrual syndrome/premenstrual dysphoric disorder is differentially associated with vasomotor symptoms in the menopausal stage. Prospective studies with larger population are needed to confirm these findings

• Korean Journal of Psychosomatic Medicine
• /
• v.23 no.1
• /
• pp.47-56
• /
• 2015

Objectives:The aim of this study is to investigate any differences between non-medical and medical college students for : 1) a level and the nature of perceived stress, 2) a level of life satisfaction, and 3) the related factors affecting to life satisfaction. Methods:We measured self-reported questionnaires of stress, satisfaction with life, health behavior including happiness, alcohol use, nicotine dependency and depressive symptoms in 1,714(863 non-medical and 851 medical) college students. Results:Non-medical college students had significantly higher total stress scores than medical college students(${\chi}^2$=7.66, p<.001). In non-medical college students, employment problem score was significantly higher than medical college students(t=4.07, p<.001). In medical college students, the scores of academic achievement (t=-3.81, p<.001), change of social life(t=-2.03, p<.05), death(t=-2.05, p<.05) or sickness(t=-2.60, p<.05) of friends were significantly higher than non-medical college students. And non-medical college students showed significantly lower life satisfaction scores than medical college students(${\chi}^2$=-19.05, p<.001). We also found that life satisfaction were significantly related to happiness in non-medical college students(${\beta}$=.410, $R^2$=.325, p<.001) and depressive symptoms in medical college students(${\beta}$=-.435, $R^2$=.326, p<.001) by stepwise multiple regression analysis. Conclusions:In this study, a level and the nature of perceived stress, a level of life satisfaction, and the related factors affecting to life satisfaction showed definitely differences between non-medical and medical college students. We suggest with our findings that specified mental health promotion program need for the college student's mental health management.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.891-897
• /
• 2021

With the development of Amyloid PET Tracer, the accuracy of Alzheimer's diagnosis can be improved through the identification of beta-amyloid neurites. However, the long image acquisition time of 20 minutes can be difficult for the patient. PET/CT scans are sensitive to patient movement and may partially affect test results. In this study, we studied the proper image acquisition time without affecting the quantitative evaluation of the image through the list mode acquisition method according to the time of the distribution of radioactive drugs in the body. The list mode includes information about time compared to the existing frame mode, and it is easy to analyze data because it can reconstruct images about the time that researchers want. The research method obtained a reconstructed image by time using a list mode of 5min frame/bed, 10min frame/bed, 15min frame/bed, and 20min frame/bed to compare the difference between signal-to-pons take ratio (SNR) and lesion-to-pons uptake ratio (LPR) and the difference in reading time to obtain an appropriate image. As a result of quantitative analysis, when measuring in list mode, SUVmean values decreased in 6 regions of interest as the image acquisition time increased, but showed the largest difference in 5 min/bed images, followed by 10 min/bed and 15 min/bed. As a result, the difference in SUVmean values decreased. Therefore, it was found that SUVmean values at 15 min/bed did not differ enough to not affect image evaluation. There was no difference in LPR values. As a result of the qualitative analysis, there was no change in the reading findings according to the PET image acquisition time and there was no significant difference in the qualitative analysis score of the image reconstruction according to time. As a result of the study, there is no significant difference between 15 min/bed and 20 min/bed images during the ¹⁸F-flutemetamol PET/CT test, so it can be said that it is clinically useful to reduce the image acquisition time selectively using 15 min/bed via list mode depending on the patient's condition.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.667-673
• /
• 2021

As we enter the era of the 4th industrial revolution, it is judged that the scope of work of radiologists will be further expanded according to the innovation and advancement of radiation medical technology development. In this study, the current status of medical equipment and radiology technicians was identified, and basic data were provided for the plan for nurturing talents in the field of radiation medical technology in the era of the 4th industrial revolution, as well as career and employment counseling. Data from the second quarter of 2020 and the second quarter of 2021 were analyzed using health and medical big data. As a result of comparing the status of medical equipment by type in 2021 compared to 2020, C-Arm X-ray examination equipment increased by 5.83% to 6,638 units, followed by MRI examination equipment 1,811 units 5.29%, and angiography equipment 725 units 5.22% , general X-ray examination equipment 21,557 units increased 3.99%, CT examination equipment 2,136 units 3.03%, and breast examination equipment 3,425 units increased 3.00%. As a result of a comparison of the total number of radiologists in 2021 compared to 2020, the number was 29,038, an increase of 2.73%. As a result of comparing the status of radiographers by region, the increase was highest in the Gyeonggi region with 5.96%, followed by the Gangwon region with a 5.66% increase and the Chungnam region with a 3.81% increase. In a situation where the number of medical equipment and radiologist manpower is increasing, universities are developing specialized knowledge and practical competency through subject development related to the understanding and utilization of customized artificial intelligence and big data that can be applied in the medical radiation technology field in the era of the 4th industrial revolution. It is necessary to nurture qualified radiographers, and at the level of the association, it is thought that active policies are needed to create new jobs and improve employment.

• Korean Journal of Food Science and Technology
• /
• v.53 no.5
• /
• pp.607-612
• /
• 2021

This study investigated the seed and water absorption characteristics of red bean cultivars in Korea. The length and width of all seeds were 7.74-8.99 mm and 5.33-5.54 mm, respectively. The hilum lengths and widths were 3.21-4.01 mm and 0.58-0.73 mm, respectively. The weight of 100 seeds was 12.14-20.21 g, and the seed coat thickness of red beans ranged from 39.18-50.01 mm. During soaking for 30 h, red beans exhibited a lag phase in the initial soaking time, followed by a rapid absorption phase, and finally contained more than 130% moisture. When water absorption was applied to the sigmoid equation, the curve fitting exhibited a high R², and the kinetics of water absorption were 0.202-0.715 h^-1, which differed among varieties. Pearson's correlation of hilum width (r=0.7858^*) and seed thickness (r= -0.9954^***) exhibited strong correlations with water absorption, suggesting that these are important factors in red bean processing.

• Journal of the Korean earth science society
• /
• v.42 no.5
• /
• pp.536-555
• /
• 2021

Sea-surface wind is an important variable in ocean-atmosphere interactions, leading to the changes in ocean surface currents and circulation, mixed layers, and heat flux. With the development of satellite technology, sea-surface winds data retrieved from scatterometer observation data have been used for various purposes. In a complex marine environment such as the Korean Peninsula coast, scatterometer-observed sea-surface wind is an important factor for analyzing ocean and atmospheric phenomena. Therefore, the validation results of wind accuracy can be used for diverse applications. In this study, the sea-surface winds derived from ASCAT (Advanced SCATterometer) mounted on MetOp-A/B (METeorological Operational Satellite-A/B) were validated compared to in-situ wind measurements at 16 marine buoy stations around the Korean Peninsula from January to December 2020. The buoy winds measured at a height of 4-5 m from the sea surface were converted to 10-m neutral winds using the LKB (Liu-Katsaros-Businger) model. The matchup procedure produced 5,544 and 10,051 collocation points for MetOp-A and MetOp-B, respectively. The root mean square errors (RMSE) were 1.36 and 1.28 m s^-1, and bias errors amounted to 0.44 and 0.65 m s^-1 for MetOp-A and MetOp-B, respectively. The wind directions of both scatterometers exhibited negative biases of -8.03° and -6.97° and RMSE values of 32.46° and 36.06° for MetOp-A and MetOp-B, respectively. These errors were likely associated with the stratification and dynamics of the marine-atmospheric boundary layer. In the seas around the Korean Peninsula, the sea-surface winds of the ASCAT tended to be more overestimated than the in-situ wind speeds, particularly at weak wind speeds. In addition, the closer the distance from the coast, the more the amplification of error. The present results could contribute to the development of a prediction model as improved input data and the understanding of air-sea interaction and impact of typhoons in the coastal regions around the Korean Peninsula.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.675-681
• /
• 2021

Recently, the Ministry of Education stipulates in the distance class operation regulations that student lecture evaluations for distance learning subjects should be conducted at least twice per semester and the results should be disclosed to students. Therefore, the lecture evaluation of D college was compared with the first semester of 2020 and the first semester of 2021. As for the multiple-choice evaluation result of the distance learning mid-course evaluation, the overall average of the mid-course evaluation of the distance class in the first semester of 2020 increased from 4.1819 to 4.4000 in the mid-course evaluation in the first semester of 2021.In the case of the first semester of 2020, due to Corona 19, all non-face-to-face classes were held, but in the first semester of 2021, face-to-face classes increased. The overall satisfaction level rose from 4.18 points in the first semester of 2020 to 4.39 points in the first semester of 2021. The screen composition, sound and picture quality, playback time, face appearance, lecture material provision, and frequency of use of the top 3% and bottom 3% also increased. Despite the changes caused by the LMS replacement, which was a concern, student attendance, assignments, and test submission rates also increased compared to the previous year. The null hypothesis that 'the difference between the two scores is the same' is the null hypothesis because the probability of significance is 0.000 and less than 0.05 in the case of the best 3% of the test result of the test result of the mid-course evaluation of distance classes in the first semester of 2020 and the evaluation of the intermediate lectures in the first semester of 2021. As this was rejected, it can be seen that the best score for the 2021 school year has significantly increased compared to the first semester of 2020. Also, in the case of Worst 3% or less, the significance probability is 0.000, which is less than 0.05, so the null hypothesis that 'the difference between the two scores is the same' was rejected, indicating that the Worst score for the 2021 school year was significantly higher than that for the first semester of 2020.

• Journal of Internet Computing and Services
• /
• v.22 no.4
• /
• pp.83-98
• /
• 2021

The purpose of this study to find the factors influencing the fire alarms using IoT firefighting facility management system data of Seoul Fire & Disaster Headquarters, and to present academic implications for establishing an effective prevention system of fire situation. As the number of high and complex buildings increases and former bulidings are advanced, the fire detection facilities that can quickly respond to emergency situations are also increasing. However, if the accuracy of the fire situation is incorrectly detected and the accuracy is lowered, the inconvenience of the residents increases and the reliability decreases. Therefore, it is necessary to improve accuracy of the system through efficient inspection and the internal environment investigation of buildings. The purpose of this study is to find out that false detection may occur due to building characteristics such as usage or time, and to aim of emphasizing the need for efficient system inspection and controlling the internal environment. As a result, it is found that the size(total area) of the building had the greatest effect on the fire alarms, and the fire alarms increased as private buildings, R-type receivers, and a large number of failure or shutoff days. In addition, factors that influencing fire alarms were different depending on the main usage of the building. In terms of time, it was found to follow people's daily patterns during weekdays(9 am to 6 pm), and each peaked around 10 am and 2 pm. This study was claimed that it is necessary to investigate the building environment that caused the fire alarms, along with the system internal inspection. Also, it propose additional recording of building environment data in real-time for follow-up research and system enhancement.

• Journal of Internet Computing and Services
• /
• v.22 no.1
• /
• pp.41-50
• /
• 2021

Cyber Kill Chain is derived from Kill chain of traditional military terms. Kill chain means "a continuous and cyclical process from detection to destruction of military targets requiring destruction, or dividing it into several distinct actions." The kill chain has evolved the existing operational procedures to effectively deal with time-limited emergency targets that require immediate response due to changes in location and increased risk, such as nuclear weapons and missiles. It began with the military concept of incapacitating the attacker's intended purpose by preventing it from functioning at any one stage of the process of reaching it. Thus the basic concept of the cyber kill chain is that the attack performed by a cyber attacker consists of each stage, and the cyber attacker can achieve the attack goal only when each stage is successfully performed, and from a defense point of view, each stage is detailed. It is believed that if a response procedure is prepared and responded, the chain of attacks is broken, and the attack of the attacker can be neutralized or delayed. Also, from the point of view of an attack, if a specific response procedure is prepared at each stage, the chain of attacks can be successful and the target of the attack can be neutralized. The cyber command and control system is a system that is applied to both defense and attack, and should present defensive countermeasures and offensive countermeasures to neutralize the enemy's kill chain during defense, and each step-by-step procedure to neutralize the enemy when attacking. Therefore, thist paper proposed a cyber kill chain model from the perspective of defense and attack of the cyber command and control system, and also researched and presented the threat classification/analysis/prediction framework of the cyber command and control system from the defense aspect

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.275-290
• /
• 2021

Sulfur dioxide (SO2) in the atmosphere is mainly generated from anthropogenic emission sources. It forms ultra-fine particulate matter through chemical reaction and has harmful effect on both the environment and human health. In particular, ground-level SO2 concentrations are closely related to human activities. Satellite observations such as TROPOMI (TROPOspheric Monitoring Instrument)-derived column density data can provide spatially continuous monitoring of ground-level SO2 concentrations. This study aims to propose a 2-step residual corrected model to estimate ground-level SO2 concentrations through the synergistic use of satellite data and numerical model output. Random forest machine learning was adopted in the 2-step residual corrected model. The proposed model was evaluated through three cross-validations (i.e., random, spatial and temporal). The results showed that the model produced slopes of 1.14-1.25, R values of 0.55-0.65, and relative root-mean-square-error of 58-63%, which were improved by 10% for slopes and 3% for R and rRMSE when compared to the model without residual correction. The model performance by country was slightly reduced in Japan, often resulting in overestimation, where the sample size was small, and the concentration level was relatively low. The spatial and temporal distributions of SO2 produced by the model agreed with those of the in-situ measurements, especially over Yangtze River Delta in China and Seoul Metropolitan Area in South Korea, which are highly dependent on the characteristics of anthropogenic emission sources. The model proposed in this study can be used for long-term monitoring of ground-level SO2 concentrations on both the spatial and temporal domains.