• Journal of the Korean Magnetics Society
• /
• v.9 no.6
• /
• pp.296-300
• /
• 1999

Cross-shape structures of spin tunneling junctions were fabricated using DC magnetron sputtering and metal masks. The film structures were $substrate/Ta/NiFe/FeMn/NiFe/CoFe/Al_2O_3/CoFe/NiFe$ and $substrate/Ta/NiFe/CoFe/ Al_2O_3/CoFe/NiFe/FeMn/NiFe$. Fabrication conditions of insulating layer ($Al_2O_3$) and thickness and sputtering power of each film layer were varied, and maximum magnetoresistance ratio of 24.3 % was obtained. Magnetic characteristic variations in the above mentioned two structures and two types of substrates (Corning glass 7059 and Si(111)) were compared. Annealing of the junctions was performed to find out magnetic characteristic variations expected from the device fabrication. Magneoresistance Ratio were observed to maintain as-deposited value up to 150 $^{\circ}C$ annealing and then to drop rapidly after 180 $^{\circ}C$ annealing.

• Journal of the Korean Magnetics Society
• /
• v.14 no.4
• /
• pp.127-130
• /
• 2004

Magnetic properties and thermal stability by exchange biased perpendicular magnetic anisotropy in (Pd/Co)$_{N}$FeMn multilayer deposited by do magnetron sputtering system are investigated. We measured the perpendicular magnetization curves of (Pd(0.8nm)/Co(0.8nm)$_{5}$FeMn multilayer as function of FeMn thickness and annealing temperature. As FeMn thickness increases from 0 to 21nm, the perpendicular exchange bias(Hex) obtained 127 Oe at FeMn thickness 15nm. As the annealing temperature increases to 24$0^{\circ}C$, the E$_{ex}$ increased from 115 Oe to 190 Oe and disappeared exchange biased perpendicular magnetic anisotropy effect at 33$0^{\circ}C$.

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.287-292
• /
• 2010

We have investigated the effects of oxygen flow ratios on the structural, morphological, and optical properties of AlN thin films grown by using radio-frequency reactive magnetron sputtering. The AlN thin films were deposited at $300^{\circ}C$ of substrate temperature, and the reactive gas were supplied with both nitrogen and oxygen. The oxygen flow ratio was varied by controlling the amount of oxygen with respect to the total mixed gases, 0%, 10%, 15%, 20%, 25%, and 30%. The structural, morphological, and optical properties of the deposited AlN thin films were examined by using X-ray diffractometer, scanning electron microscopy, and ultraviolet-visible spectrophotometer. The AlN thin film grown at 10% of oxygen flow ratio indicated an average transmittance of 91.3% in the wavelength range of 350~1,100 nm and an optical band gap of 4.30 eV. The experimental results suggest that AlN thin films can be deposited optionally by varying the oxygen flow ratio.

• Korean Journal of Materials Research
• /
• v.5 no.6
• /
• pp.633-638
• /
• 1995

Two types of $Ta_2O_{5}$, films, prepared by thermal oxidation and PECVD, on P-type(100) Si wafers were studied to examine the relationship between electrical properties and stresses of the films. For the thermally oxidized films, Ta films were depositied on the Si wafers by dc magnetron sputtering followed by thermal oxidation as functions of oxidation temperature and time. The PECVD films were deposited on the Si wafers as a fuction of RF power density. The relationship between the electrical properties and film stresses were studied. In the case of thermally oxidized $Ta_2O_{5}$ film, the electrical properties and film stress were not found to be dependent on each other, while PECVD $Ta_2O_{5}$ films showed that the electrical properties were depended on the film stress.

• Journal of the Korean Ceramic Society
• /
• v.49 no.6
• /
• pp.663-668
• /
• 2012

In order to reduce the indium contents in transparent conducting oxide(TCO) thin films of $In_{1.6{\sim}1.8}Zn_{0.2}Sn_{0.2{\sim}0.4}O_3$ (IZTO), $In_{1.6}Zn_{0.2}Sn_{0.2}O_{3-{\delta}}$(IZTO) was prepared by replacing indium with Zn and Sn. The TCO films were deposited via RF-magnetron sputtering of the IZTO target at various deposition temperatures and its film characteristics were investigated. When deposited in an Ar atmosphere at $400^{\circ}C$, the electrical resistivity of the film decreased to $6.34{\times}10^{-4}{\Omega}{\cdot}cm$ and the optical transmittance was 80%. As the deposition temperature increased, the crystallinity of the IZTO film was enhanced. As a result, the electrical conductivity and transmittance properties were improved. This demonstrates the possibility of replacing ITO TCO film with IZTO.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.2
• /
• pp.37-41
• /
• 2017

Cuprous oxide ($Cu_2O$) is one of the potential candidates as an absorber layer in ultra-low-cost solar cells. $Cu_2O$ is highly desirable semiconducting oxide material for use in solar energy conversion due to its direct band gap ($E_g={\sim}2.1eV$) and high absorption coefficient that absorbs visible light of wavelength up to 650 nm. In addition, $Cu_2O$ has other several advantages such as non-toxicity, low cost and also can be prepared with simple and cheap methods on large scale. In this work, we deposited the $Cu_2O$ thin films by electrodeposition on gold coated $SiO_2/Si$ wafers. We changed the process conditions such as pH of the solution, applied potential on working electrode, and solution temperature. Finally, we confirmed the structural properties of the thin films by XRD and SEM.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.664-669
• /
• 2018

To observe the relationship between the oxygen vacancy and electrical characteristics of $TiO_2$ due to the $CO_2$ gases, the $TiO_2$ were deposited by the mixing gases of $Ar:O_2=20$ sccm:20 sccm and annealed with various temperatures. The bonding structure was changed with the annealing temperature from amorphous to crystal structure, and the oxygen vacancy was also changed with these bonding structures. The $CO_2$ gas reaction of $TiO_2$ films showed the variation in accordance with the bonding structure. The capacitance increased at the amorphous structure $TiO_2$, and the current also increased. However the oxygen vacancy decreased at this amorphous structure $TiO_2$. Because of the formation of oxygen vacancies is in inverse proportion to the amorphous structure. Moreover, the diffusion current in the depletion layer such as the amorphous structure showed the difference in accordance with the $CO_2$ gas flow rates.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.111-115
• /
• 2003

200nm 정도의 두께를 가진 SBT 박막이 liquid delivery MOCVD 공정에 의해 (111) oriented Pt/Ti/$SiO_2$/Si 기판 위에 증착되었다 이 실험에서는 $Sr(TMHD)_2$tetraglyme, $Bi(ph)_3$ 그리고 $Ta(O^iPr)_4$(TMHD)를 출발 물질로 사용하였다. Sr 출발 물질의 열적 안정화를 위해서 adduct로 tetraglyme를 사용하여 실험하였고 유기 용매로는 n-butyl acetate를 사용하였다 Substrate temperature와 reactor pressure는 각각 $570^{\circ}C$와 5Torr로 유지시켰다. 또한 vaporizer의 용도는 $190-200^{\circ}C$, 그리고 delivery line 의 온도는 vaporizer 보다 높게 유지 $(220-230^{\circ}C)$하여 출발 용액을 분당 0.1ml로 50분간 주입하였다. 수송가스로 Ar, 산화제로 $O_2$ 가스를 사용하였다. 제조한 SBT 박막은 $750^{\circ}C$에서 열처리한 후 인가전압 3V와 5V에서 $2P_r$값이 각각 6.47, $8.98{\mu}C/cm^2$이었으며, $2E_c$값은 인가전압 3V와 5V에서 각각 2.05, 2.31V이었다 그리고 $800^{\circ}C$에서는$750^{\circ}C$에서 열처리한 SBT 박막보다 다소 우수한 이력특성을 나타내어 $2P_r$ 값은 인가전압 3V와 5V에서 각각 7.59, $10.18{\mu}C/cm^2$ 이었으며, $2E_c$값은 인가 전압 3V와 5V에서 각각 2.00, 2.21V 이었다.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.1
• /
• pp.81-86
• /
• 2016

$Eu^{3+}$-doped $MgMoO_4$ phosphor thin films were deposited on quartz substrates by radio frequency magnetron sputtering with changing various growth temperatures. The effects of growth temperature on the structure, transmittance, optical band gap, and luminescence of the phosphor thin films were characterized. All the phosphor thin films, irrespective of growth temperature, showed a monoclinic structure with a main (220) diffraction peak. The thin film deposited at a growth temperature of $400^{\circ}C$ indicated an average transmittance of 90% in the wavelength range of 500 ~ 1100 nm and band gap energy of 4.81 eV. The excitation spectra of the phosphor thin films consisted of a broad charge transfer band peaked at 284 nm in the range of 230 ~ 330 nm and two weak peaks located at 368 and 461 nm, respectively. The emission spectra under ultraviolet excitation at 284 nm exhibited a sharp emission peak at 614 nm and several weak bands. All the phosphor thin films showed high asymmetry ratio values, indicating that $Eu^{3+}$ ions incorporated into the host lattice occupied at the non-inversion symmetry sites. The results suggest that the growth temperature plays an important role in growing high-quality phosphor thin films.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.198-198
• /
• 2010

산화물 반도체는 넓은 밴드갭을 가지고 있어 가시광에서 투명하며 높은 이동도로 디스플레이 구동 회로 집적에 유리하다. 또한 가격 및 공정 측면에서도 기존의 Si 기판 소자에 비해 여러 장점을 가지고 있어 차세대 디스플레이의 핵심 기술로 산화물반도체에 대한 관심이 높아지고 있다. 본 연구는 RF 동시 스퍼터링법을 이용하여 Zn-Sn-O 박막을 제조하고, 그 전기적, 광학적, 구조적 특성에 대해 조사하였다. 일정한 증착 온도($100^{\circ}C$)에서 ZnO와 $SnO_2$ 타켓의 인가 파워를 조절하여 Sn/(Zn+Sn) 성분비가 약 40~85%인 Zn-Sn-O 박막을 제조하였다. Sn 함량이 증가할수록 박막의 비저항은 약 $2{\times}10^{-1}$ (Sn 45%)에서 약 $2\;{\times}\;10^{-2}\;{\Omega}{\cdot}cm$ (Sn 67%)까지 감소하다가 다시 증가하는 경향을 보였다. 이 때 캐리어 농도는 $3\;{\times}\;10^{18}$에서 $4\;{\times}\;10^{19}\;cm^{-3}$으로 증가하였으며, 이동도는 11에서 $8\;cm^2/V{\cdot}s$로 약간 감소하였다. XRD분석결과, 제조된 모든 Zn-Sn-O 박막은 비정질 구조를 가짐을 확인하였다. 투과율은 박막 내 Sn함량 증가에 따라 감소하나 모든 시편이 약 70%이상의 투과도를 나타내었다. Zn-Sn-O 박막의 Ga 도핑 영향을 확인하기 위해 ZnO 타켓 대신 갈륨이 5.7 wt.% 도핑된 GZO 타켓을 사용하여 동일한 공정조건에서 박막을 제조하였다. Ga이 첨가된 Zn-Sn-O 박막은 구조적 특성과 광학적 특성에서는 큰 차이를 보이지 않았으나, 전기적 특성의 뚜렷한 변화가 관찰되었다. Sn 함량이 45%인 Zn-Sn-O 박막의 경우, 캐리어 농도가 $3.1\;{\times}\;10^{18}$에서 Ga 도핑 효과로 인해 $1.7\;{\times}\;10^{17}\;cm^{-3}$으로 크게 감소하고 이동도는 11에서 $20\;cm^2/V{\cdot}s$로 증가하였다. 따라서 본 연구는 Zn-Sn-O 비정질 박막에 Ga을 도핑함으로써 산화물 반도체재료로서 요구되는 물성을 만족시킬 수 있다는 가능성을 제시하였다.