• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.794-797
• /
• 2009

중소형 폐기물 소각설비의 폐열보일러에서 생산되는 10 $kg/cm^2$미만의 저압증기를 이용한 증기터빈발전에서 증기의 건도를 높이이 위한 증기 전처리가 필수적이며, 건도를 증가시킨 증기를 이용하여 발전실험을 하였다. 본 연구에 적용된 증기터빈발전기는 마이크로 축류식 증기터빈으로 배압식을 채택하였으며, 증기터빈에 공급되는 증기압력의 증가에 따라 증기공급량, 발전량이 증가하였으며, 이에 따른 발전 효율은 설비의 효율에 따라 변하였다. 또한, 배압식 증기터빈의 경우, 공급.배기측의 증기 압력의 차이가 증가함에 따라 발전을 위한 증기 소비율이 감소하고 발전 효율이 증가함을 볼 수 있었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.459-466
• /
• 2006

Numerical values of thermodynamic properties such as temperature, pressure, dryness, volume, enthalpy and entropy are required in numerical analysis on evaluating the thermal performance. But the steam table itself cannot be used without modelling. From this point of view the neural network with function approximation characteristics can be an alternative. the multi-layer neural networks were made for saturated vapor region and superheated vapor region separately. For saturated vapor region the neural network consists of one input layer with 1 node, two hidden layers with 10 and 20 nodes each and one output layer with 7 nodes. For superheated vapor region it consists of one input layer with 2 nodes, two hidden layers with 15 and 25 nodes each and one output layer with 3 nodes. The proposed model gives very successful results with ${\pm}0.005%$ of percentage error for temperature, enthalpy and entropy and ${\pm}0.025%$ for pressure and specific volume. From these successful results, it is confirmed that the neural networks could be powerful method in function approximation of the steam table.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.750-756
• /
• 2011

An experimental study was carried out to measure the heat transfer coefficient in flow boiling to deionized water in a microchannel having a hydraulic diameter of $500{\mu}m$. Tests were performed in the ranges of heat fluxes from 100 to 400 kW/$m^2$, vapor qualities from 0 to 0.2 and mass fluxes of 200, 400 and 600 kg/$m^2s$. From the experimental results, it is found that the measured heat transfer coefficients is independent of mass flux and quality, and is somewhat dependent of heat flux. Measured data of heat transfer are compared to a few available correlations proposed for macroscale. The previous correlations for macroscale overpredicted the flow boiling heat transfer coefficient for the test conditions considered in this work.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.702-708
• /
• 2015

Two-phase flow boiling experiments were conducted using FC-72 as the working fluid. The micro-channels consisted of 15 channels with a depth of 0.2 mm, width of 0.45 mm, and length of 60 mm. Tests were performed over a mass flux range of $200-400kg/m^2s$, heat flux range of $5.6-49.0kW/m^2$, and vapor quality range of 0.02-0.93. Based on the results of the experiment, the heat transfer mechanism by nucleate boiling was dominant at a lower vapor quality (x<0.2), whereas that in the region of a vapor quality greater than 0.2 was complexly influenced by nucleate boiling and forced convection boiling. The nucleate boiling and forced convection boiling could be expressed as functions of the boiling number and convection number, respectively. In addition, the heat transfer coefficient obtained by the experiment was compared with the heat transfer coefficient by the existing correlation.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.257-262
• /
• 2000

원전을 가동함에 따라 전열관에서는 SCC(stress corrosion cracking), 프레팅(fretting) 등과 같은 다양한 종류의 결함이 발생된다. 이러한 결함이 발생된 전열관에 대해서는 건정성 평가를 수행하여 계속 가동을 수행하던가, 전열관 막음(plugging) 또는 재생보수(sleeve) 등의 보수 작업을 수행하게 된다. 현행 전열관의 구조 건정성 확보를 위한 방안 중의 하나로 결함의 종류, 위치 등에 관계없이 모든 결함에 대하여 40% 관두께 기준을 적용하고 있다［1］. 그러나 현재 적용되고 있는 40% 관두께 보수기준은 전열관의 파열사고 가능성을 완벽하게 차단하지 못하면서도 과도하게 보수적인 측면이 있다.(중략)

• Journal of computational fluids engineering
• /
• v.20 no.3
• /
• pp.1-7
• /
• 2015

When the steam is used as working fluid in fluid machinery, different from other gases as air, phase transition (steam condensation) can occur and it affects not only the flow fields, but also machine performance & efficiency. Therefore, considering phase transition phenomena in CFD calculation is required to achieve accurate prediction of steam flow and non-equilibrium wet-steam model is needed to simulate realistic steam condensing flow. In this research, non-equilibrium wet-steam model is implemented on in-house code(T-Flow), the flow fields including phase transition phenomena in convergent-divergent nozzle are studied and compared to results of advance researches.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.461-467
• /
• 2012

An experimental study was carried out to measure frictional pressure drop in flow boiling to deionized water in a microchannel having a hydraulic diameter of $500{\mu}m$. Tests were performed in the ranges of heat fluxes from 100 to $400kW/m^2$, vapor qualities from 0 to 0.2 and mass fluxes of 200, 400 and $600kg/m^2s$. The frictional pressure drop during flow boiling is predicted by using two models; the homogeneous model that assumes equal phase velocity and the separate flow model that allows a slip velocity between two phases. From the experimental results, it is found that the two phase multiplier decreases with an increase in mass flux. Measured data of pressure drop are compared to a few available correlations proposed for macroscale and mini/microscale. The homogeneous model well predicted frictional pressure drop within MAE of 29.4 % for the test conditions considered in this work.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.297-302
• /
• 1997

A hemiconfocal resonator equipped with an intra-cavity adjustable aperture and a beam splitter has been studied experimentally to achieve a controlled low beam divergence operation in a vapor laser system. The dependences of output characteristics both on the aperture diameter and on the angle of beam splitter have been investigated. By adjusting the aperture diameter from 14mm to 2mm to 2mm, we were able to reduce the beam divergence from 3.1 mrad to 0.25 mrad and achieved the 8-times increase in the far-field power density.

• Tribology and Lubricants
• /
• v.7 no.2
• /
• pp.13-21
• /
• 1991

선박은 사람이나 화물을 수상(水上) 운송수단의 목적으로 오랜 옛날부터 사용하여 왔으며, 금세기에 이르러서는 오랜 옛날부터 사용하여 왔으며, 금세기에 이르러서는 인류문화의 급속한 발전에 따라 주변생활이 가속화(Speed화), 합리화되어 문명의 혜택을 보다 많이 누리게 된 반면에, 국제간에 파생되는 여러가지 교환현상을 바탕으로 지구는 하나의 촌(村)으로 되어 유통경제를 지배하고 이용하는 운송수단으로 발전되어 왔다. 물질문명이 급속히 발전하는 작금, 선용추진 주 기관의 동향을 살펴보면, 1981년 세계에서 건조한 2000톤급 이상의 선박은 940여척으로 이중 13척이 증기 Turbine. 추진(推進), 나머지는 미끄럼 저속 디이젤 또는 중고속 디이젤 추진으로 되어있다. 이와 병행하여 선박에 쓰여지고 있는 각종 윤활제는 주기관으로서 디이젤 engine, Trubine engine, 가솔린 engine, 석유, engine, 선외기, 왕복동 증기기관, Journal계열로서 역전기, 추력베어링, 중간 베어링, 프로펠러베어링, 일반상선으 보조기계로서 발전기, 공기압축기, Boiler, 각종 Pump, 각종 Motor, 냉동기, 조타장치, Side Thrust, 갑판기계, 환기용 송풍기 및 통풍통, Oil 청정기, 수밀로(水蜜爐), 소화설비, 주기 개방용 천정 크레인, elevator, 어선으로서의 주 기관, 보조기기 등에 쓰여지고 있으며 이밖에 수중날개선 등에도 적용되는 등 실로 다양다종한 윤활제가 요구되고 있음에, 본 논고에서는 제목 건을 중심으로 한 선박과 윤활의 중요 Point만을 간추려 기술하고져 한다.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.221-225
• /
• 1999

The positive branch confocal unstable resonator equipped with an intra-cavity beam splitter has been studied experimentally to achieve low beam divergence in the copper vapor laser. Output laser beams of 0.15 mrad divergence was achieved from the laser system with a 10 cm curvature convex mirror (M=30), and laser beams of 0.1 mrad was achieved for a 5 cm curvature convex mirror (M=60). The power density of the far-field beam from the M=60 resonator laser was 130 times higher than the case of the 2 mrad-operation with the plane-parallel resonator. We also observed the self-mode-locking from the unstable resonator laser pulses.