• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.55-68
• /
• 2014

Some infrastructure these days is usually constructed under the ground for it to not interfere the foot-traffic of pedestrians, and thus, it is difficult to visually confirm the accurate location of the site where the establishments must be buried. These technical difficulties increase the magnitude of the problems that could arise from over-reliance on the experience of the worker or a mere blueprint. Such problems include exposure to flood and collapse. This paper proposes a constructor-oriented visualization system via mobile gadgets in general construction sites with occluded structures. This proposal is consisted with three stages. First, "Stage of detecting manhole and extracting features" detects and extracts the basis point of occluded structures which is unoccluded manhole. Next, "Stage of tracking features" tracks down the extracted features in the previous stage. Lastly, "Stage of visualizing occluded constructions" analyzes and synthesizes the GPS data and 3D objects obtained from mobile gadgets in the previous stages. This proposal implemented ideal method through parallel analysis of manhole detection, feature extraction, and tracking techniques in indoor environment, and confirmed the possibility through occluded water-pipe augmentation in real environment. Also, it offers a practical constructor-oriented environment derived from the augmented 3D results of occluded water-pipings.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.2
• /
• pp.49-62
• /
• 2008

This paper proposes an indoor location positioning system for the image recognition based LBS. The proposed system is a vision-based location positioning system that is implemented the augmented reality by overlaying the location results with the view of the user. For implementing, the proposed system uses the pattern matching and location model to recognize user location from images taken by a wearable mobile PC with camera. In the proposed system, the system uses the pattern matching and location model for recognizing a personal location in image sequences. The system is estimated user location by the image sequence matching and marker detection methods, and is recognized user location by using the pre-defined location model. To detect marker in image sequences, the proposed system apply to the adaptive thresholding method, and by using the location model to recognize a location, the system can be obtained more accurate and efficient results. Experimental results show that the proposed system has both quality and performance to be used as an indoor location-based services(LBS) for visitors in various environments.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.2 s.314
• /
• pp.37-46
• /
• 2007

In this paper, we propose technologies for enhancing the immersive realization of virtual objects in AR-based product design. Generally, multimodal senses such as visual/auditory/tactile feedback are well known as a method for enhancing the immersion in case of interaction with virtual objects. By adapting tangible objects we can provide touch sensation to users. A 3D model of the same scale overlays the whole area of the tangible object so the marker area is invisible. This contributes to enhancing immersion. Also, the hand occlusion problem when the virtual objects overlay the user's hands is partially solved, providing more immersive and natural images to users. Finally, multimodal feedback also creates better immersion. In our work, both vibrotactile feedback through page motors, pneumatic tactile feedback, and sound feedback are considered. In our scenario, a game-phone model is selected, by way of proposed augmented vibrotactile feedback, hands occlusion-reduced visual effects and sound feedback are provided to users. These proposed methodologies will contribute to a better immersive realization of the conventional AR system.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.2
• /
• pp.55-65
• /
• 2011

In this paper, a novel method of marker detection robust against marker occlusion in augmented reality is proposed. the proposed method consists of four steps. In the first step, in order to effectively detect an occluded marker, we first utilize the Affine-SIFT (ASIFT, Affine-Scale Invariant Features Transform) for detecting matching points between an enrolled marker and an input images with an occluded marker. In the second step, we apply the Principal Component Analysis (PCA) for eliminating outlier of the matching points in the enrolled marker. And then matching points are projected to the first and second axis for longest value and the shortest value of an ellipse are determined by average distance between the projected points and a center of the points. In the third step, Convex-hull vertices including matching points are considered as polygon vertices for estimating a geometric affine transformation. In the final step, by estimating the geometric affine transformation of the points, a marker robust against a marker occlusion is detected. Experimental results have shown that the proposed method effectively detects occlude markers.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.7
• /
• pp.49-55
• /
• 2022

In this paper, we propose an obstacle detection method that can operate robustly even in external environmental factors such as weather. In particular, we propose an obstacle detection system that can accurately inform dangerous situations in AR through DB-based feature matching and RANSAC-based multiplane method. Since the approach to detecting obstacles based on images obtained by RGB cameras relies on images, the feature detection according to lighting is inaccurate, and it becomes difficult to detect obstacles because they are affected by lighting, natural light, or weather. In addition, it causes a large error in detecting obstacles on a number of planes generated due to complex terrain. To alleviate this problem, this paper efficiently and accurately detects obstacles regardless of lighting through DB-based feature matching. In addition, a criterion for classifying feature points is newly calculated by normalizing multiple planes to a single plane through RANSAC. As a result, the proposed method can efficiently detect obstacles regardless of lighting, natural light, and weather, and it is expected that it can be used to secure user safety because it can reliably detect surfaces in high and low or other terrains. In the proposed method, most of the experimental results on mobile devices reliably recognized indoor/outdoor obstacles.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.249-256
• /
• 2022

Various studies are being actively conducted to show that the real-time visualization technology that combines BIM (Building Information Modeling) and AR (Augmented Reality) helps to increase construction management decision-making and processing efficiency. However, when large-capacity BIM data is projected into AR, there are various limitations such as data transmission and connection problems and the image cut-off issue. To improve the high efficiency of visualizing, a mesh optimization algorithm based on the k-nearest neighbors (KNN) classification framework to reconstruct BIM data is proposed in place of existing mesh optimization methods that are complicated and cannot adequately handle meshes with numerous boundaries of the 3D models. In the proposed algorithm, our target BIM model is optimized with the Unity C# code based on triangle centroid concepts and classified using the KNN. As a result, the algorithm can check the number of mesh vertices and triangles before and after optimization of the entire model and each structure. In addition, it is able to optimize the mesh vertices of the original model by approximately 56 % and the triangles by about 42 %. Moreover, compared to the original model, the optimized model shows no visual differences in the model elements and information, meaning that high-performance visualization can be expected when using AR devices.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.3
• /
• pp.397-402
• /
• 2016

Recently, many ICT companies are trying to expand the ecosystem of VR (Virtual Reality) and AR (Augmented Reality). They are developing a variety of industries such as entertainment, education, e-commerce and so on. There is also contains the power, energy field. And application related with VR/AR will increase in power industry. Thus, Platform is necessary because there are problems such as re-use, interface with legacy system and security. We can expect the convenience and efficiency by developing VR/AR power platform. In this paper, we will discuss the trends of VR/AR technologies, possibilities of VR/AR in energy field, essential elements of VR/AR power platform. In the future, we expect to lead standards of VR/AR in energy and to develop a killer application such as Pokemon GO.

• Journal of the Korea Computer Graphics Society
• /
• v.25 no.3
• /
• pp.55-63
• /
• 2019

Recently, the GPU computing method has been utilized to improve the performance of the physics simulation field. In particular, in the case of a deformed object simulation requiring a large amount of computation, a GPU-based parallel processing algorithm is required to guarantee real-time performance. We have studied the parallel structure design method to improve the performance of the mass spring simulation method which is one of the methods of implementing the deformation object simulation. We used OpenGL's GLSL, a graphics library that allows direct access to the GPU, and implemented the GPGPU environment using an independent pipeline, the compute shader. In order to verify the effectiveness of the parallel structure design method, the mass - spring system was implemented based on CPU and GPU. Experimental results show that the proposed method improves computation speed by about 6,000% compared to the CPU Environment. It is expected that the lightweight simulation technology can be effectively applied to the augmented reality and the virtual reality field by using the design method proposed later in this research.

• Smart Media Journal
• /
• v.11 no.8
• /
• pp.55-64
• /
• 2022

In the recent education market, Edutech technology, in which various digital technologies are grafted into the education, is being actively applied due to the 4th industrial revolution and the development of ICT. In particular, realistic experiential learning contents that can provide realistic and immersive learning in a virtual space are in the spotlight and are being expanded to each field. However, in the field of Korean medicine education, the introduction of ICT is delayed due to the nature of Korean medicine, difficulties in apprenticeship education, quantitative education, and the absence of an objective evaluation system. Therefore, in this study, we propose a digital technology application for acupuncture and acupuncture points, where practice is particularly important in Korean medicine. Various methods of acupuncture and acupoints education using AR, MR, IoT and Touch-Display Table will provide an opportunity to change the paradigm of Korean medicine education and further contribute to the globalization of Korean medicine.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.1 no.1
• /
• pp.51-54
• /
• 2009

In or automotive engineering education is introduced. Main objective of the system is teaching disassemble/assemble procedure of automatic transmission of a vehicle to students, who study automotive engineering. System includes vehicle transmission, set of tools and mechanical facilities, two video cameras, computer with developed software, HMD glasses and two LCD screens. Developed software gives instructions on assembling and disassembling processes of real vehicle transmission with the help of augmenting virtual reality objects on the video stream. Overlaying of 3D instructions on the technological workspace can be used as an interactive educational material. In disassembling process, mechanical parts which should be disassembled are augmented on video stream from video cameras. Same is done for assembling process. Animation and other visual effects are applied for better indication of the current assembling/disassembling instruction. During learning and training, student can see what parts of vehicle transmission and in which order should be assembled or disassembled. Required tools and technological operations are displayed to a student with the help of augmented reality, as well. As a result, the system guides a student step-by-step through an assembly/disassembly sequence. During educational process a student has an opportunity to return back to any previous instruction if it is necessary. Developed augmented reality system makes educational process more interesting and intuitive. Using of augmented reality system for engineering education in automotive technology makes learning process easier and financially more effective.