• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.9
• /
• pp.989-996
• /
• 2007

In this study, abiotic transformation of 1-naphthol(1-NP) via oxidative-coupling reaction and its reaction products were investigated in the presence of Mn oxides. The reaction products were characterized for their relative polarity using solvent extraction experiment and reverse-phase HPLC, and for structure using CCMS and LC/MS, and for absorption characteristics using UV-Vis spectrometry. The reaction products present in aqueous phase were more polar than parent naphthol and comprised of 1,4-naphthoquinon(1,4-NPQ) and oligomers such as dimers and trimers. Hydrophilic component present in water phase after solvent$(CH_2Cl_2)$ extractions was identified as naphthol polymerized products having molecular weight(m/z) ranging from 400 to 2,000, and showed similar UV-Vis. absorption characteristics to that of foil fulvic acid. Transformation of 1,4-NPQ, which is non-reactive to Mn oxide, to the polymerized products via cross-coupling reaction in the presence of 1-NP was also verified. In this experimental conditions(20.5 mg/L, 1-NP, 2.5 g/L $MnO_2$, pH 5), the transformation of 1-NP into the oligomers and polymerized products were about 83% of initial 1-NP concentrations, and more than 30% of the reaction products was estimated to be water insoluble fractions, not extracted by $H_2O$ methanol. Results from this study suggest that Mn oxide-mediated treatment of naphthol contaminated soils can achieve risk reduction through the formation of oligomers md polymer precipitation.

• Journal of Yeungnam Medical Science
• /
• v.12 no.2
• /
• pp.269-281
• /
• 1995

The effect of persistant mild hyperglycemic hyperinsulinemia on the development of the insulin resistance in rats was studied in vivo. Also, the characteristics of the insulin resistance compared with the insulin resistance of STZ diabetic rats. Persistant mild hyperglycemic hyperinsulinemic rat model was produced by ingestion of glucose polymer for 8 days. The glucose disappearance and infusion rate was measured by hyperinsulinemic euglycemic clamp technique at steady state of blood glucose and insulin levels. The clamped level of blood glucose was 100 mg/dl, and the clamped levels of insulin were $70{\mu}U/ml$ (physiologic condition) and $3000{\mu}U/ml$ (supramaximal condition). Hepatic glucose producticon rate was calculated using measured data. And the glycogen synthetic capacity of skeletal muscle(soleus) and liver was measured after 2 hours of hyperinsulinemic euglycemic clamp study. The glucose disappearance and glucose infusion rate in glucose polymer group was decreased in the both physiological and supramaximal insulin level compared to the rate of the normal control group. The rate of STZ diabetic group wase lowest at supramaximal insulin level among two another experimental groups. The hepatic glucose production rate of glucose polymer group was decreased compared to normal control but increased in STZ diabetic group. The glycogen synthetic capacity of skeletal muscle and liver of glucose polymer group was not significantly different from normal control group, but it was markdly decreased in STZ diabetic group. These results suggest that persistant mild hyperglycemic hyperinsulinemia may induce insulin resistance, but glycogen synthetic capacity is intact.

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.437-444
• /
• 2000

Propylene polymerizations were carried out by using rac-Et(Ind)$_2$ZrCl$_2$ (Zirconocene catalyst) and a commercial third generation Ziegler-Natta catalyst in a semibatch reactor. From the polymerization reactions, the optimum reaction conditions and the physical properties of polymers produced from each catalyst system were investigated. The optimum reaction temperatures of rac-Et(Ind)$_2$ZrCl$_2$ and Ziegler-Natta catalyst were 5$0^{\circ}C$, 4$0^{\circ}C$, respectively. On the basis of the results for the produced polymer particle size distributions and the catalytic activities of polymerization reaction, the reaction temperature should be considered as an important factor for the successful polymerization reactions. Especially, the polymer was conglomerated in the higher reaction temperature. It was found that there was an upper limitation to co-catalyst concentration. Reaction rates and polymer yields rather decreased with increasing the concentration of to-catalyst, i.e., MAO and TEAl affected only polymerization activities, but the PEEB in Ziegler-Natta catalyst system affected isotactic indexes of produced polymer as well as activities. Based on these observations, the production yield seems to exhibit a first order lineal relationship to the partial pressure of monomer.

• Journal of Radiation Protection and Research
• /
• v.7 no.1
• /
• pp.49-55
• /
• 1982

Thermally stimulated currents of polymers have some properties as radiation dosimetry, especially polymer could be made as a good dosimeter in biological fields because of tissue equivalent material. We experimented the radiation response of polymers and attempted to apply it in clinical use. Polymers have the properties of thermoluminescence and thermally stimulated currents which are due to several kinds of charged particles such as dipoles, electronic trapped charges and mobile ions. Several peaks are datected in the thermally stimulated currents in polyethylene under vias field V, by heating from room temperature to $100^{\circ}C$ shortly after irradiation. As V increases, both the peak temperature $T_m$ and the activation energy H decreases, while the peak current $I_m$ increases. We plotted the $T_m-V\;and\;I_m-V$ curves and calculated the electron trap depth with the recombination operative TSC theory and compared the peak TSC with radiation doses.

• Journal of the Korean Chemical Society
• /
• v.21 no.2
• /
• pp.132-138
• /
• 1977

Anionic polymerization of ${\varepsilon}$-caprolactam via $SO_2$/KOH catalysis was attempted in order to find an optimal reaction condition and physical properties of the polymers. The yield of conversion was relatively low at low temperature and high at high temperature between $150^{\circ}C\;to\;180^{\circ}C$ regardless of $SO_2$/KOH mole ratio in polymerization of ${\varepsilon}$-caprolactam.The inherent viscosity of nylon 6 obtained via $SO_2$/KOH catalysis was 1.2∼2.7. The kinetic equation for the $SO_2$/KOH catalyzed polymerization has been derived and experimentally verified.

• Membrane Journal
• /
• v.29 no.4
• /
• pp.191-201
• /
• 2019

Before the commercialization of polymeric membranes applicable for industrial application, the homework remains for the high-performance polymers to overcome the practical challenge: long-term stability for prolonged service time. Polymers of intrinsic microporosity (PIMs), exhibiting exceptionally high fractional free volume and high permeability, are susceptible to physical aging where the extra volume created by the inefficient ladder-type packing will lead them from the volumetric equilibrium and reduce the free volume/permeability over time. Here, we will re-examine the physical aging of polymers of intrinsic microporosity, and discuss some of the most prominent attempts to mitigate physical aging in PIMs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.575-580
• /
• 2014

The liquid crystalline copolymers were synthesized through direct polycondensation using 4-[4-(4-hydroxyphenoxy)butoxy]benzoic acid (HBBA) and p-hydroxy benzoic acid (HBA) as monomers. The structure and properties for synthesized copolymers were investigated by $^1H$-NMR, FT-IR, differential scanning calorimetry (DSC), thermogravimetry analysis (TGA) and polarizing optical microscope (POM). As result of investigations, inherent viscosities (${\eta}_{inh}$) of polymers were measured as 0.77~1.60 dL/g in phenol/p-chlorophenol/1,1,2,2-tetrachloroethane (25/40/35=w/w/w). Except for P-80, the ranges of the transition and mesophase temperature of copolymers were increased with increasing the amount of HBA. These properties of polymers were presumably due to increasing of the irregularity and rigidity of polymer chains.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.111-116
• /
• 2010

The treatment of heavy metal, in the waste ash from incinerator and mine solid waste, by using alkali-soluble acrylic copolymer emulsion, that is effective in the absorption of heavy metal has been studied. It seemed that alkali soluble acrylic copolymer emulsion was very effective in the absorption of Hg, Pb, Cd and Cu in this test. Also, eco-friendly thixotropic grout, using alkali soluble acrylic copolymer emulsion, that is effective in the absorption of heavy metal, for the recycling of waste ash from incinerator and mine solid waste has been tested. It was observed that waste ash could be used as a raw material of eco-friendly thixotropic grout mortar due to the effectiveness of alkali soluble acrylic copolymer emulsion in the fixation of heavy metals including $Cr^{6+}$ from waste ash in this test.

• Asian Journal of Turfgrass Science
• /
• v.23 no.2
• /
• pp.317-330
• /
• 2009

Research was initiated to investigate germination vigor, number of leaves, plant height and turfgrass density. A total of 18 treatment combinations were used in the study. Treatments were made of soil organic amendment(SOA), sand, and water-absorbing polymer. Germination vigor, leaf number, plant height and turfgrass density were evaluated in Kentucky bluegrass(KB) grown under greenhouse conditions. Significant differences were observed in germination vigor, leaf number, plant height and turfgrass density among 18 mixtures of SOA and polymer. Highest germination rate was associated with mixture of SOA 20% + sand 80% + polymer 0%, resulting in 56.3% for KB. Number of leaves at 60 DAS(days after seeding) were greater with KB over PR, while plant height higher with PR over KB. Leaf number increased with SOA, being SOA 20% > SOA 100% > SOA 10% and with polymer from 0 to 12%. Plant height was greatest with SOA 20% and lowest with SOA 100%. Greater density was observed with PR rather than KB due to longer plant height. Turf density was best under SOA 10% and poorest under SOA 100% in KB. A further research would be required for investigating the individual effect of K-SAM, Ca, perlite on the turf growth characteristics.

• Journal of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.73-79
• /
• 1980

N-Vinylurea(VU) was radically copolymerized with vinyl acetate (VAc). VU-vinyl alcohol (VA) copolymer, which is a water-soluble polymer with pendent urea and hydroxyl groups, was synthesized by the methanolysis of the VU-VAc copolymer.VU shows vinyl polymerization, and this result is in agreement with that of Nozakura, et al. Huggins constant for the aqueous solution of the VU-VA copolymer containing more than about 30 mole percent of VU was observed to be a high value.