• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.6
• /
• pp.447-452
• /
• 2011

In this study, the polymeric membrane module is used as a diffuser and an image analysis technique based on visual information is applied to get bubble characteristics. The bubble size generated passed through polymeric membrane module was smaller from 30 to 64% than that of air stone, and bubble volume over 70% was ranged from 0.2 to 0.82 mm. But over 80% the bubbles from air stone diffuser ranged from 0.77 to 1.08 mm. The air stone and polymeric membrane module used as diffuser for a flotation system. The floc size inside the flotation reactor using air stone diffuser was bigger than that of the polymeric membrane module, which means that the micro-bubbles generated from polymeric membrane module could provide better opportunities for collisions between colloidal particles than those from air stone diffuser. Therefore, there is a possibility to apply the polymeric membrane module as a diffuser to increase the removal efficiency in the flotation process. Also, the image analysis technique used in this study could be applied as a useful analytical tool for acquisition of an information about the bubble characteristic.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.04a
• /
• pp.110-112
• /
• 1998

1. 서론 : 분석화학의 중요한 과제중 하나 고효율(high efficiency)과 고해상도(high resolution)를 가지고서 혼합물에서 분자나 입자의 분리능을 개선하는 것과 낮은 수준의 농도에서 이런 분획들(fractions)을 정량화 하는 것이다. 현재의 추세는 분리하고자 하는 분자의 상한선을 증가시키는 것이 순수과학과 산업에서 중요하게 되었다. 이런 분리 기술의 응용은 거대분자(macromolecules)와 입자들(particles)인 cell fragments, plasmides, chromosomes, liposomes, synthetic polymers 등에 적용되고 있는데, 고전적인 분석방법으로는 한외여과, 원심분리, 크기배제 크로마토그래피 등이 있지만 시간이 걸리고 해상도와 효율에 제한이 있다.

• Food Science and Preservation
• /
• v.10 no.4
• /
• pp.482-487
• /
• 2003

The filtration effects of glass membrane filters and hollow fiber membranes with different pore size to prevent the haze of a commercial foxtail millet Yakju were investigated. The most particles(haze precusors) present in the Yakju were removed by using 1.2 $\mu\textrm{m}$ glass membrane filter. In case of using 0.45$\mu\textrm{m}$ hollow fiber membrane system, the permeate flux on the Yakju filtration was calculated to 342.8 lmh. During the 3 month storage at 4$^{\circ}C$ and room temperature for each 48 hrs in turn, alittle fine haze was observed from the Yakju even if it was filtered by using 0.7 $\mu\textrm{m}$ glass membrane filter. Anything of haze was, however, observed from the Yakju filtered by using all of hollow fiber membranes. Therefore, the 0.45$\mu\textrm{m}$ hollow fiber membrane system was effective as a final filtration process of the Yakju.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.4
• /
• pp.74-80
• /
• 2003

Ionic wind is produced by a corona discharge when a DC high voltage is applied across the point-to-plane gap geometry. The corona discharge phenomena have been investigated in several beneficial application fields such as electrostatic cooling, ozone generation, electrostatic precipitation and electrostatic spraying. Recently ionic wind might be used in aerodynamic, for example, heat transfer, airflow modification, and etc. In this work, in order to analyze the control behavior of the velocity and amount of ionic wind produced by the positive DC corona discharges. The ionic wind velocity was measured as a function of the applied voltage, diameter of the punched hole on plate electrode and separation between the point-to-plate electrodes. As a results, the airflow is generated from the tip of needle to the plate electrode in the needle-to-punched-plate electrode systems. The ionic wind velocity is linearly increased with an increase in applied voltage and ranges from 1 to 3 m/sec at the locations of 100-200 mm from the punched-plate.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05b
• /
• pp.192-194
• /
• 2004

FFF에서 외부장은 시료의 종류에 따라 선택적으로 사용되며, 그 외부장의 종류에 따라 세부기술로 구분되어진다. 원심력(gravitational or centrifugal field)을 외부장으로 사용하는 침강장-흐름분획법(sedimentation FFF)은 지름이 0,05∼1um정도인 콜로이드 입자의 분리에 좋은 방법이다. 온도구배(thermal fradient)를 이용하는 열장-흐름분획법(thermal FFF)은 유기 고분자의 분리 및 고분자의 물성연구에 이용된다.(중략)

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.685-689
• /
• 2008

The effect of filler type and dispersion time on thin film characterization is studied. Hollow silica powders which have the advantage of transmittance are selected. In this paper, the characterization of haze, transmittance, and gloss are analyzed in terms of filler concentration and coating thickness, respectively. As a result, the value of haze and gloss increased with increasing of filler concentration and coating thickness, respectively. In addition, the variation of transmittance by filler concentration and coating thickness is not occurred. In conclusion, it is assumed that hollow silica powders as a filler have an advantage of concentration increment and transmittance.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.648-652
• /
• 2006

Demand for $MnO_{2}$ has been increased with interest for its various applications in the fields of battery, catalyst, and capacitor. In this study, $MnO_{2}$ hollow microspheres were synthesized by sacrificial core method. $MnO_{2}$ nano particles were produced by the hydrolysis and condensation of manganese acetate. The stable $MnO_{2}$ hollow microspheres can very well be synthesized with mixing 0.2% of water, 0.65 mM of manganese acetate, and 0.02 mM catalyst at a room temperature.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.3
• /
• pp.184-190
• /
• 2011

$LiMn_2O_4$ with mesoporous hollow sphere shape was synthesized by precipitation method with silica template. The synthesized $LiMn_2O_4$ has nanosized first particle and mesoporous hollow sphere shape. Silica template was removed by chemical etching method using NaOH solution. When the concentration of NaOH solution was increased, first particle size of manganese oxide was decrease and confirmed mesoporous hollow shpere shape. X-ray diffraction(XRD) patterns revealed that the synthesized samples has spinel structure with Fd3m space group. In case the ratio of silica and maganese salt increased, the size of first particles was decreased. The tetragoanal $LiMn_2O_4$ with micron size was synthesized at ratio of silica and manganese salt over 1 : 9. The prepared samples were assembled as cathode materials of Li-ion battery with 2032 type coin cell and their electrochemical properties are examined by charge-discharge and cyclic performance. Electrochemical measurements show that the nano-size particles had lower capacity than micron-size particles. But, cyclic performance of nano-size particles had better than that of micron-size particles.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.690-694
• /
• 2021

Carbon spheres (CS) were fabricated using glucose as a precursor in the hydrothermal method. Hollow TiO₂ (H-TiO₂) spheres with 200 nm, 500 nm, and 1,200 nm were synthesized by CS/TiO₂ core-shell particles via a sol-gel and calcination method. H-TiO₂ spheres with nano and micron sizes were characterized using FE-SEM, HR-TEM, and X-ray diffraction. The CIE color coordinate, solar reflectance, and heat shield temperatures of H-TiO₂/polyacrylate (PA) composite film were investigated using a UV-Vis-NIR spectrometer and homemade heat insulation temperature measuring device. H-TiO₂/PA composites exhibit excellent thermal insulation since the hollow structure filled with dry air has low thermal conductivity and near infrared light reflecting performance. The thermal insulation increased with increasing the hollow sphere (HS) size on H-TiO₂/PA composites. The PA composite film mixed with H-TiO₂ filled with 1200 nm HS reduced the heat shield temperature by 26 ℃ compared to that of the transparent glass counterpart.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.160-166
• /
• 2014

In this research, as a measure of reducing energy lost through external wall, we used Glass Hollow Micro Sphere (HMS) to improve insulation performance to structural concrete. The following is a result of experimenting concrete using HMS. As usage of HMS, decrease in slump arose and it is judged as a need of using superplasticizer. Replacement ratio increasing more and more, amount of air showed tendency to decrease and compressive strength decreased for interfacial adhesion had not been formed. as replacement ratio and unit volume decreased. It appears that thermal conductivity decreased about 30.0~46.5 percent as compared with normal weight concrete.