• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.41-47
• /
• 2007

The first geostationary satellite made by Korea, COMS, has the three different payload ; Meteorological sensor, Oceanographic sensor and Ka-band communication payload. There are Meteorological & Ocean Data Communication Subsystem(MODCS) and Telemetry, Command and Ranging Subsystem(TC&R) as other RF radiation sources. MODCS transmits and receives Meteo and Ocean measurement data from/to earth using L-band and TC&R using S-band. The Ka-band communication payload will provide high-speed multimedia services and communication services for natural disaster such as prediction, prevention, and recovery services in the government communications network.Ka-band beacon is for the earth antenna pointing and the experiment of rain fading. This paper gives the analysis results about the mutual radiation effect on Ka-band communication payload, Ka-band beacon, MODCS and TC&R. Up/Down link power and coupling factor including the geometrical position and distance of antenna, filter rejection and degradation factor due to the different polarization are considered. The results show MODCS and TC&R are compatible for Ka-band communication payload and Ka-band beacon does not interfere with MODCS and TC&R normal operation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.54-56
• /
• 2015

In this paper, we investigate a physical-layer network coding (PNC) in a two-way relay channel (TWRC) where two sources send and receive data with each other by help of a relay node with multiple antennas. We focus on the multiple-access phase of the TWRC in this paper. It is assumed that the source nodes do not know the wireless channel and the wireless channel independently varies in time, that is, fast fading environments. At the relay node, the channel is assumed to be perfectly known. The relay node utilizes the channel sate information and applies maximum likelihood ratio for detecting received signals. Through extensive simulations, it is shown that a bit error rate (BER) performance becomes improved as the number of antennas at the relay node increases.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.1
• /
• pp.51-63
• /
• 2008

Previous studies for routing In USN (Ubiquitous Sensor Networks) appear to be unreliable due to the dependence on non-spatial data and the lack of map overlay analysis. Multiple spatial parameters and radio propagation modeling techniques were integrated to derive RSSI (Received Signal Strength Indicator) value between route nodes and produce a highly reliable path map. It was possible to identify area-wide patterns of USN route subject to many different Influences (e.g. the specific effects of radio blocking factors such as the visible area, road area, cell duplicated area, and building density), which cannot be acquired by traditional non-spatial modeling. The quantitative evidence concerning the USN route for individual cell as well as entire study area would be utilized as major tools to visualize paths in real-time and to select alternative path when failure or audition of route node occurs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1165-1171
• /
• 2008

In this paper, a pilot emitting amplify-and-forward relay and its beamforming schemes, OBF (overall beamforming) and RBF (hop-by-hop beamforming), are proposed for two-hop relaying systems. The OBF performs beamforming with respect to a overall channel from a source node (SN) to a destination node (DN) through a relay node (RN), while the proposed RBF performs two independent beamformings: from the SN to the RN and from the RN to the DN. From our analytic and numerical results, it is shown that bit-error-rate (BER) performance of the proposed RBF is better than that of the OBF scheme since the RBF system can estimate channel more proper than the CBF system, which is verified by deriving and comparing the mean square errors of the channel estimation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.20-25
• /
• 2012

The COMS, which is a multi-purposed satellite that provide the oceanic measurement data and meterological image data, is operating since 2010. Ka-band satellite communication transponder in COMS gets the MSM function that can provide the required multi-beam and transmits the multi-mode signal with high data rate. The phase noise of COMS communication transponder can be increased because of several local oscillators for MSM function and the utilization of Ka-band frequency. The phase noise affects the performance for the multi-mode and high rate data based- transmission method, it is not possible to recover the transmission data in system with the high system phase noise. In this paper, the phase noise of COMS was measured and the effects of the measured phase noise are analysed and evaluated in the viewpoint of the noise bandwidth of transmission system, Also the transmission performances for multi-mode and high rate data are evaluated in the presence of COMS phase noise.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8C
• /
• pp.731-741
• /
• 2009

Optical repeater is often installed at the isolated area. Spatial separation makes it possible to reduce the inter-code interference when secondary scrambling codes are used for traffic connected through repeater. In this paper, we propose five secondary scrambling code usage scenarios with the aids of optical repeater to maximize the user capacity. In order to evaluate the performance, dynamic system level simulation is performed. We also propose a base station-repeater switching where each active users can change access points by comparing the channel condition from base station and repeater thorough secondary common pilot channel (S-CPICH) signal to noise-interference ratio (SINR). Moreover, primary-secondary scramble code replacing scheme is proposed which replaces secondary scramble code with primary scramble code when a call using primary scramble code is ended and its corresponding OVSF code is available to users using the secondary scramble code

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10B
• /
• pp.911-918
• /
• 2008

In this paper, we propose new cell structures using multi-hop Relay Station(RS) based on IEEE802.16j in Narrow-Beam Trisector Cell (NBTC) and Wide-Beam Trisector Cell (WBTC), which are two methods for cell sectorization using 3-sector directional antennas. Then, we analyze our proposed structures compared with the existing system which does not use any RS about the numbers of optimized Base Station (BS) and multi-hop relay, the extended BS coverage, and the deployment cost according to the traffic density using optimization model. According to the results, we know the reduction of total deployment cost of the proposed systems and that WBTC is suitable when the traffic density is high and NBTC is suitable when the traffic density is low in our proposed multi-hop based NBTC and WBTC structures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.27 no.1
• /
• pp.62-68
• /
• 2023

An aerial relay system utilizing an unmanned aerial vehicle(UAV) or drone is addressed for event-driven operations such as temporary communication services for disaster affected area, military and first responder support. UAV relay system (URS) targets to provide a reliable communication service to a remote user equipment or an operator, therefore, a fast UAV placement to guarantee a minimum quality of service(QoS) is important when an operation is requested. Researches on UAV utilization in communication systems mostly target to derive the optimal position of UAV to maximize the performance, however, fast deployment of UAV is much more important than optimal placement under emergency situations. To this end, this paper derives the feasible area for UAV placement, investigates the effect of performance requirements on that area, and suggests UAV placement to certainly guarantee the performance requirements. Simulation results demonstrate that the feasible area derived in this paper matches that obtained by an exhaustive search.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.333-341
• /
• 2002

This article is written to make a foundation for effective radio network engineering by enabling the accurate traffic assumption between Base Station (BTS : Base Station Transceiver Subsystem) md Repeater through the scientific and systematic analysis of mobile traffic dealt within CDMA Base Station. Among these, Repeater, having direct physical connection with BTS, simply does the remote relay function but the volume of the traffic flowed into the repeater is not accountable. The total BTS traffic is the sum of traffic dealt by the BTS and multiple Repeaters. In this article, we tried traffic analysis of this kind by adopting RTD (Round Trip Delay) which is specially designed to measure distribution of the distance between the Base Station and the Mobile station by differentiating the traffic dealt by BTS from traffic dealt by Repeaters. The fact that the connection between mobile station and BTS via Repeater (which is located remotely) yields far more delay than the direct connection between mobile station and BTS is the clue of this article. Based on this fact, Time Delay equipment was put at the receiving side of the Repeater to add certain amount of delay to the traffic to BTS and the result showed that the 99.78% of the traffic can be identified.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.11a
• /
• pp.385-394
• /
• 2000

기업간 및 기업 대 정부간 문서교환의 요구를 충족시키기 위한 일원으로 기업들은 산업 표준에 따른 전자문서교환(EDI)에 많은 관심과 노력을 기울여왔으며, 국내에서는 한국 EDIFACT위원회를 중심으로 전자문서 표준화가 이루어졌다. 국내 수출업자들이 관세청에 수출신고를 위한 통관 EDI 교환은 주로 부가가치통신망(VAN) 사업자들을 통해 이루어지고 있으나 이러한 EDI 중계 서비스는 특정 VAN사업자들을 통해 EDI서비스가 독점됨에 따라 서비스 이용에 있어 값비싼 전송료 및 통신망 임차비, 잦은 통신 지연, 기업 내부 시스템과의 연계의 어려움 등으로 인하여 많은 문제점을 낳았다. 현재 이러한 전통적 방식의 EDI를 인터넷 기반으로 전환할 때 인터넷의 개방성과 저렴한 사용비용등의 장점으로 인해 비용절감과 사용자 편이성을 크게 증가시킬 것으로 기대된다. 본 연구에서는 인터넷과 웹을 이용하여 통관 EDI 중계 시스템을 개발하였다. 현재 수출을 하고자 하는 주체는 관세청에서 반드시 EDI로 수출에 관한 신고를 하여야 하는바, 본 시스템은 이러한 EDI신고를 인터넷상에서 가능하도록 한 것이다. 본 연구에서는 기존 HTML에서 진일보한 차세대 마크업 언어인 XML을 이용하였다. 본 연구에서 구축한 XML/EDI 통관시스템은 수출신고에 필요한 11개의 전자문서에 대한 XML Schema를 디자인하고, 사용자 관리, SchemaStyleTemplate 관리, XML/EDI 문서관리 XML/EDI변환, EDI 송수신 관리, 인증관리, 로그관리 등의 모듈을 지니고 있으며 개방형 EDI와 인터넷 EDI의 장점을 취합하여 설계되었다. 본 시스템은 기존의 UN/EDIFACT표준을 사용하고 있는 EDI환경과 기존 VAN 방식의 EDI 중계 시스템과 연동되며, 향후 관세청의 XML/EDI 표준 시행을 미리 대비하는 선도연구로서 자리매김이 된다. 본 연구에서는 개발된 XML/EDI 통관시스템은 향후, 서비스의 최대 걸림돌이 되어왔던 값비싼 EDI 사용료의 부담에서 벗어날 수 있게 할 것이며, 저렴한 EDI구축/운영 비용으로 전자문서교환의 활성화와 XML이 인터넷 기반의 문서유통 표준으로 자리매김할 수 있는 중요한 계기가 될 것이다.