• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1670-1679
• /
• 2011

In the area of wireless sensor networks, sensor coverage and network connectivity problems are caused by a limited detection range and the communication distance of the nodes. To solve the coverage and connectivity problems, many studies are suggested, but most research is restricted to apply into the real environment because they didn't consider various environmental factors on wireless sensor network deployment. So in this paper, we propose a node deployment strategy considering environmental factors and the number of nodes in surveillance and reconnaissance sensor networks(SRSN). The proposed node deployment method divides the installation of the surveillance and reconnaissance sensor networks system into four steps such as identification of influences factors for node placement through IPB process, sensor node deployment based on sensing range, selection of monitoring site, and relay node deployment based on RF communication range. And it deploys the sensor nodes and relay nodes considered the features of the surveillance and reconnaissance sensor network system and environmental factors. The result of simulation indicates that the proposed node deployment method improves sensor coverage and network connectivity.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.5
• /
• pp.25-32
• /
• 2010

This paper evaluates the outage probability of cognitive relay networks with cooperation between secondary users based on the underlay approach, when multiple primary receivers coexist with secondary users. Using an appropriate relay selection criterion in cognitive radio networks, we derive the outage probability of secondary user. It is shown that the outage probability increases as the number of primary receivers increases and we quantify the increase. Through the simulation results, we verify that the performance of relaying transmission is varied more sensitively compared to that of direct transmission as the number of primary receivers increases. In addition, the relaying transmission can be less efficient than the direct transmission when multiple primary receiver exist but it can be more efficient than the direct transmission by increasing the relay selection diversity.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.570-576
• /
• 2019

The configuration of dispersion-managed optical link with optical phase conjugator, which is placed at the non-midway of total transmission length, is proposed for implementing of the flexible optical network. The optical phase conjugator is located between the former half transmission section and the latter half transmission section, which are consisted of 6 fiber spans and 14 fiber spans respectively, and the averaged RDPS of each half transmission section are inconsistence. And, the artificial distribution of each fiber span's RDPS, which are gradually increased/decreased as the span numbers are increased, is adopted to compensate for the distorted wavelength division multiplexed channels. From the simulation results, it is confirmed that the compensation in dispersion-managed link configured by a special distribution pattern among 16 proposed patterns, in which the RDPS of each fiber spans are gradually decreased/increased in the former/latter half section with the small deviation, is suitable to compensate for the distorted wavelength division multiplexed channels.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.1
• /
• pp.51-63
• /
• 2008

Previous studies for routing In USN (Ubiquitous Sensor Networks) appear to be unreliable due to the dependence on non-spatial data and the lack of map overlay analysis. Multiple spatial parameters and radio propagation modeling techniques were integrated to derive RSSI (Received Signal Strength Indicator) value between route nodes and produce a highly reliable path map. It was possible to identify area-wide patterns of USN route subject to many different Influences (e.g. the specific effects of radio blocking factors such as the visible area, road area, cell duplicated area, and building density), which cannot be acquired by traditional non-spatial modeling. The quantitative evidence concerning the USN route for individual cell as well as entire study area would be utilized as major tools to visualize paths in real-time and to select alternative path when failure or audition of route node occurs.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.95-101
• /
• 2009

Wireless Sensor Network (WSN) has limited power and bandwidth. In order to high data rate and high speed communication systems are required. Cooperative communication system can help to decrease power consumption through spatial diversity. In cooperative transmission, one partner node assists one sensor node to transmit their data to destination. Instead of using M partners for M sensor nodes, we propose 1 partner for M sensor nodes. And we proposed relay selection scheme base on ARQ. Proposed protocol offers higher diversity order as conventional one with much less bandwidth and power. The destination will consider the one packets received from the best relay to reduce the complexity of the system. We verified BER performance for the proposed protocol through Monte-Carlo simulation over Rayleigh fading plus AWGN.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.67-72
• /
• 2014

In this paper, an energy harvesting scheme is applied in the cooperative communication. The proposed scheme uses an energy harvesting relay in which the relay harvests the energy from the source node and transfers to the power form in forwarding the received data to the destination node. The well-known maximal ratio combining (MRC) technique is applied to increase the diversity gain at the destination. Therefore, with applying the proposed energy harvesting scheme, the limited power at the relay is solved, and the operation efficiency of the network and the mobile devices is improved. Finally, performance of the proposed protocol is analyzed in terms of bit error rate, outage probability, power collection efficiency.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.113-119
• /
• 2008

Conventional 1-1-1 cooperative protocol offers path-loss gain as advantage of multi-hop and spatial diversity which is equivalent to MIMO system. This protocol is enable to get higher reliability and reduction of power consumption than those of the single-hop or multi-hop. But the 1-1-1 cooperative protocol get only the diversity order 2 and limited path-loss reduction gain because this protocol has a single cooperative relay. We propose 1-2-1 cooperative protocol using two cooperative relays R1, R2. The 1-2-1 cooperative protocol can improve path-loss reduction and increase diversity order 3. Moreover, the cooperative relay R2 attains diversity order 2. The signaling method in transmission uses DF (Decode and Forward) or DR (Decode and Reencode) and 1-2-1 DF/DR cooperative protocol are applied to clustering based wireless sensor networks (WSNs). Simulations are performed to evaluate the performance of the protocols under Rayleigh fading channel plus AWGN (Additive White Gaussian Noise).

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2007.05a
• /
• pp.75-83
• /
• 2007

본 논문에서는 .NET 기반의 Remoting 시스템과 Socket 통신을 이용하여 이 기종 DB Server 간의 Data 동기화를 구현하였다. 이 시스템은 Client 의 웹 브라우저를 이용 Socket 통신으로 Data를 전송하여 데이터베이스에 저장하는 방식으로 구현하였고, Data 읽기는 Remoting 기술인 중계 어플리케이션 서버의 클래스를 원격으로 실행시켜 Data를 가져오는 방식으로 구현하였다. DB 동기화는 Data를 저장할 때 중계 어플리케이션 서버와 DB 서버의 Data 관리 어플리케이션 간 비동기 통신으로 DB 서버의 Data 처리 수준을 실시간으로 감시하여 중계 어플리케이션 서버에서 선택적으로 Data를 전송하고, 이후 Data 처리 수준이 정상화기 되면 다시 Data를 전송케 함으로써 이 기종 DB 서버간의 동기화를 구현하였다. 본 논문은 1 장에 서론, 2 장에 .NET Remoting 기술과 네트워크 프로그래밍, 3 장에 이 기종 DB 서버 간 동기화 시스템 설계 및 구현, 4 장에 결론을 기술하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.96-97
• /
• 2010

다중 홉 중계기술은 차세대 무선통신을 위한 핵심 기술로 최근 전 세계적으로 활발히 연구되고 있으며, 셀 용량 증대, 셀영역 확장, 음영지역 축소 등의 장점으로 인하여, IEEE 802.11s, 802.15.4, 802.16j 등의 표준화에의 반영을 위한 논의가 활발히 진행되고 있다. 본 논문에서는 간섭신호가 존재하지 않는 이상적 네트워크 환경을 고려한 기존 연구의 한계를 극복하기 위해, 다중 간섭신호가 존재하는 레일레이(Rayleigh) 페이딩 채널에서 이중 홉(dual-hop) 복호후재전송(DF : decode-and-forward) 중계시스템의 시스템 모델을 제안하고, 모의실험을 통하여 불능확률 및 4진 직교 진폭 변조(4-QAM)를 위한 평균비트오율 (average bit error rate) 성능을 살펴본다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.1319-1322
• /
• 2005

복호 후 전달 협력 통신 프로토콜(DFP: Decode-and-Forward Cooperative Communication Protocol)은 물리적인 안테나의 증가 없이 다중 안테나 시스템의 장점을 가지는 통신 방법이다. 지금까지는 신호 대 잡음 비율(SNR: Signal to Noise Ratio)이나 경로이득 크기의 루트를 취한 값들을 이용하여 중계 노드에서 복호한 데이터를 전달 여부를 결정하여 중계 노드에서 부정확한 검파가 되지 않도록 방지하였다. 본 논문에서는 기존의 DFP 에서 사용되던 SNR 을 대체할 수 있는 LLR(Log-Likelihood Ratio)를 이용하는 방법을 제안하였다. 레일리 페이딩 환경과 AWGN 환경에서 기준값이나 중계 노드의 위치에 상관없이 LLR 기반의 DFP 가 SNR 기반의 DFP 보다 높은 성능을 보이는 것을 확인하였다.