• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.5
• /
• pp.29-38
• /
• 1998

This paper proposes the neural network self-tuning PID controller for the load frequency control of 2- areas power system, namely, the prompt convergence of frequency and tie-line power flow deviation. The neural network applied to computer simulation consists of neurons of two inputs, ten hiddens and tliree outputs layer. Neurons of two inputs layer receive the error and its change rate of the system and cutputs layer consists of three neurons for the parameters of the PID controller. The simulation results shows that the proposed neural network self-tuning PID controller is superior to conventional control t~:chniques(Optimal, PID) in dynamic response and control performance.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.3
• /
• pp.156-163
• /
• 2003

Most watermarking techniques insert watermarks into transform coefficients in the frequency domain because we can consider robust or imperceptible frequency bands against malicious attacks to remove them. However, parameterization of 3-D data is not easy because of irregular attribution of connectivity information, while 1-I) or 2-D data is regular. In this paper we propose a new watermarking scheme for 3-D polygonal mesh models in the DCT domain. After we generate triangle strips by traversing the 3-D model and transform its vertex coordinates into the DCT domain, watermark signals are inserted into mid-frequency bands of AC coefficients for robustness and imperceptibility. We demonstrate that our scheme is robust against additive random noise, the affine transformation, and geometry compression by the MPEG-4 SNHC standard.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.137-146
• /
• 2011

The purpose of the present study was to investigate personality type with evoked potentials. Teenage students(121 males, 69 females) tested Myers Briggs Type Indicator and raven like discrimination task by evoked potential. Raven like discrimination tasks were made of low, medium and high levels. Conclusively extraversion and introversion while accomplishing the raven like discrimination tasks, showed the significant difference between two groups in the power of concentration. M-Beta(middle beta), Gamma and H-Beta(high beta) were also appeared significant differences between two groups. The sensing and intuition type partially appeared the different tendency of two groups while accomplishing easy and medium of difficulty tasks. Thinking and Feeling type while accomplishing raven like discrimination tasks, showed difference of the concentration power and H-Beta at Fp1. But judgment and perception type did not appear the difference between two groups while accomplishing raven like discrimination tasks of low, medium, and high. These results implied that the personality type can be affected brain wave by evoked potentials.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.5 s.311
• /
• pp.57-67
• /
• 2006

Intellectual property rights are gathering strength theses days. Because digital contents are easily reproduced and distributed by advanced computers and networks. Digital watermarking is one of the best solutions for this problem. Generally, frequency-domain watermarking algorithms are preferred since they are more robust than spatial-domain algorithms. However, coefficients in the frequency domain are floating-point numbers. Thus, it is not easy to manipulate those floating-point coefficients and frequency-domain watermarking algorithms have some limitations in their applications. In order to overcome this difficulty, we employ an integer transform in this paper. In addition, our proposed algerian can extract the watermark from both the spatial and frequency domains. We embed the watermark into a specific bit-plane of mid-frequency coefficients. This is equivalent to the differential energy watermarking (DEW) in the spatial domain. Our simulation results show that the proposed algorithm is imperceptible, good for the watermark payload, and robustness against various attacks. Moreover, it is more efficient than any other algorithm working in only one domain.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.893-898
• /
• 2019

Time-frequency representations are methods to display the magnitude or energy density of a signal on the two dimensional plane of both time and frequency. They are useful in analyzing the characteristics of time-varying signals. Music is a typical time-varying signal, and it can be analyzed by time-frequency representations. Recently, it is popular to change the sound quality by attaching a safety sounder to an instrument. It is performed to improve perception subjectively by spending little cost and modifying sound quality. In time domain, it is difficult to notify the difference between music signals with and without the sounder. But, it is easy to find the difference in frequency domain or in time-frequency domain. In this paper, the music signal from a flute with sounder is analyzed both in the frequency domain and in the time-frequency domain. It is confirmed that the frequency components in the mid-frequency range of 500~2500 are reinforced.

• Journal of Broadcast Engineering
• /
• v.21 no.5
• /
• pp.803-815
• /
• 2016

In this paper, we design a direct radio frequency (RF) sampling receiver for multiband GNSS signals and demonstrate its performance. The direct RF sampling is a technique that does not use an analog mixer, but samples the passband signal directly, and all receiver processes are done in digital domain, whereas the conventional intermediate frequency (IF) receiver samples the IF band signals. In contrast to the IF sampling receiver, the RF sampling receiver is less complex in hardware, reconfigurable, and simultaneously converts multiband signals to digital signals with an analog-to-digital (AD) converter. The reconfigurability and simultaneous reception are very important in military applications where rapid change to other system is needed when a system is jammed by an enemy. For simultaneous reception of multiband signals, the sampling frequency should be selected with caution by considering the carrier frequencies, bandwidths, desired intermediate frequencies, and guard bands. In this paper, we select a sampling frequency and design a direct RF sampling receiver to receive multiband global navigation satellite system (GNSS) signals such as GPS L1, GLONASS G1 and G2 signals. The receiver is implemented with a commercial AD converter and software. The receiver performance is demonstrated by receiving the real signals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.235-243
• /
• 2012

In this paper, we propose a method to improve performance of pilot symbol assisted modulation(PSAM) channel estimation method for OFDM systems over frequency selective channel. When channel values are estimated, the low pilot density used for channel estimation increases not only the effective data rate but also power efficiency. Thus, the lower pilot density which is used for channel estimation is better for OFDM system. At first, we estimate the channel values which are located at the middle of adjacent pilots, and then all of the possible channel values are estiamted by using original pilot values and previously estimated pilot values. Furthermore, the error of estimated channel values is reduced by introducing guard interval which is designed acccording to maximum channel delay. Performance achieved with the proposed method is illustrated by simulation experiments in comparison with the existing methods in terms of mean squared error(MSE).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.1002-1008
• /
• 2001

The absorbing structure composed of multi-layered fiber reinforced composite materials was designed and microwave absorbing properties are investigated. On the basis of transmission line theory, the theoretical equations to predict the reflection loss and the appropriate composite material for each functional layer are suggested. The most significant result of this study is the successful design and fabrication of triple-layered composite laminates which has the superior microwave absorbing porperties (more than 10 dB in 4∼12 GHz range), without using the ferrite filler in the impedance transforming layer. In the two-layered composite laminate (absorber/substrate), however, the use of ferrite filler (about 40 wt %) in the absorbing layer is necessary to obtain the certain level of microwave absorbance. By combining the glass-fiber composite with ferrite filler and carbon-fiber composite substrate, the microwave absorbing properties more than 10 dB in 4∼12 GHz frequencies than be obtained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.256-268
• /
• 2007

In this paper, we present a watermarking method for 3-D mesh sequences. The main idea is to transform vertex norm with the identical connectivity index along temporal axis using wavelet transform and modify the distribution of wavelet coefficients in temporally high (or middle) frequency frames according to watermark bit to be embedded. All vertices are divided into groups, namely bin, using the distribution of coefficients in low frequency frames. As the vertices with the identical connectivity index over whole frames belong to one bin, their wavelet coefficients are also assigned into the same bin. Then, the watermark is embedded into the wavelet coefficients of vertex norm. Due to the use of the distribution, our method can retrieve the hidden watermark without any information about original mesh sequences in the process of watermark detection. Through simulations, we show that the proposed is flirty robust against various attacks that are probably concerned in copyright protection of 3-D mesh sequences.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.665-670
• /
• 2015

In this paper, We proposed a broadband RF amplifier for Microwave band receiver. We also proposed a broadband RF amplifier, designed by using EM simulation for reliable amplification of the received signal. Connected to a source terminal to via, it minimizes those which are the active elements of source-side oscillation as the operating element in an ideal GND, and a constant gain characteristic in a broadband. The goal of this was to obtain stable amplification characteristics. For implementing this architecture, we designed the broadband(500 MHz ~ 7 GHz) RF amplifier by using commercial GaAs FET, which operate on 720 MHz, 4,595 MHz, and 6,035 MHz by impedance matching. The voltage gain is 10.635 dB ~ 14.407 dB(737.5 MHz ~ 6.0575 GHz), P1dB is 20 dBc of band(1st harmonic/2nd harmonic).