• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.65-65
• /
• 2017

밭작물 중 양파와 마늘은 높은 노동투하시간, 노임의 상승, 복잡한 수거 과정 등으로 최근 재배면적이 감소하는 추세이다. 밭농업 활성화 방안으로 생산비 절감과 작업 속도 향상을 위한 수확기계 개발 연구로 줄기절단기가 개발되었다. 이 연구는 줄기절단기 예취날의 설치각이 절단부하에 미치는 영향을 분립체 해석 기법으로 분석하고자 하였다. 실험에 사용한 시뮬레이션은 EDEM으로 인장탄성계수, 전단탄성 계수, 중첩길이, 입자 반경 및 질량, 상대속도를 이용하여 충돌시 힘을 해석하고 인장 및 전단강도, 한계, 결합 길이를 통해 입자간 결합을 설정할 수 있다. 시제품으로 설계된 줄기절단기의 치수를 활용하여 프로그램 상에서 줄기 절단 시뮬레이션을 진행하여 절단부하 결과를 얻도록 하였고 칼날 설치각을 30도, 45도, 60도로 변경하여 각각의 부하를 분석하여 경향성을 파악하고자 하였다. 실험에서 사용한 프로그램은 EDEM 2.7.1 Academic Research 버전이며 시뮬레이션을 진행한 PC의 사양은 Intel(R) $Core^{TM}$ i7-4790 CPU @ 3.60GHz, Memory 16.0GB이다. 줄기 절단 시뮬레이션에 적용시킨 줄기 모델은 마늘의 조건을 적용시켜 직경 1mm의 입자로 이루어진 지름 12mm, 높이 214mm의 원통형 모델이며 60.32N의 최대절단력을 가지고 있다. 줄기절단기는 2개의 회전날을 가지고 있으나 좌우대칭을 적용하여 절반에 대한 해석으로 하나의 회전날로 절단을 하도록 줄기 모델은 4조로 하여 3열을 140mm 간격으로 위치시켰다. 줄기절단기의 칼날은 반경 350mm로 회전하며 진행속도는 1.65m/s, 회전속도는 1680rpm으로 작업하도록 하였다. 시뮬레이션은 0.5초의 시간에 대해 해석하도록 하였으며 0.003초 간격으로 칼날에 가해지는 힘을 구하여 저장하도록 하였다. 시뮬레이션 해석시간은 약 116시간이었으며 설치각별 시간에 따른 칼날에 가해지는 압축력 값과 그래프를 얻을 수 있었다. 대부분의 시간에서 절단이 이루어지지 않으므로 0의 값을 나타내었으며 절단이 이루어지는 시점에 절단부하가 나타났다. 결과 해석을 위해 그래프의 피크 값들을 이용하였으며 그 중 상위 6개의 값으로 분석하였다. 30도, 45도, 60도의 설치각에 따른 절단부하의 평균 값은 각각 105.4N, 160.5N, 215.9N으로 나타났다. 설치각에 따른 절단부하의 경향성은 유의수준은 3.93%로 각각의 차이가 유의미하게 나타났으며 상관계수는 0.489로 증가하는 경향이 보였다. 그러나 $R^2$는 0.2394로 낮은 값을 보여 데이터 처리 방법의 개선과 적절한 회귀 모델의 적용이 필요하다. 향후 포장시험을 진행하고 복합적으로 분석하여 경향성을 자세히 분석하고자 한다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.3
• /
• pp.31-38
• /
• 2019

This study quantified, through a direct harvesting method, storage and annual uptake of carbon from open-grown trees for three landscape tree species frequently planted in the southern region of Korea, and developed quantitative models to easily estimate the carbon reduction by tree growth for each species. The tree species for the study included Camellia japonica, Lagerstroemia indica, and Quercus myrsinaefolia, for which no information on carbon storage and uptake was available. Ten tree individuals for each species (a total of 30 individuals) were sampled considering various stem diameter sizes at given intervals. The study measured biomass for each part of the sample trees to quantify the total carbon storage per tree. Annual carbon uptake per tree was computed by analyzing the radial growth rates of the stem samples at breast height or ground level. Quantitative models were developed using stem diameter as an independent variable to easily calculate storage and annual uptake of carbon per tree for study species. All the quantitative models showed high fitness with $r^2$ values of 0.94-0.98. The storage and annual uptake of carbon from a Q. myrsinaefolia tree with dbh of 10 cm were 24.0 kg and 4.5 kg/yr, respectively. A C. japonica tree and L. indica tree with dg of 10 cm stored 11.2 kg and 8.1 kg of carbon and annually sequestered 2.6 kg and 1.2 kg, respectively. The above-mentioned carbon storage equaled the amount of carbon emitted from the gasoline consumption of about 42 L for Q. myrsinaefolia, 20 L for C. japonica, and 14 L for L. indica. A tree with the diameter size of 10 cm annually offset carbon emissions from gasoline use of approximately 8 L for Q. myrsinaefolia, 5 L for C. japonica, and 2 L for L. indica. The study pioneers in quantifying biomass and carbon reduction for the landscape tree species in the southern region despite difficulties in direct cutting and root digging of the planted trees.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.2
• /
• pp.318-324
• /
• 1996

한국산 녹차의 효과적인 가공공정을 규명하기 위한 기초자료를 얻기 위하여, 컴퓨터를 이용한 실험실 규모의 열풍건조장치를 사용하여 채엽시기, 가열방법, 유념 및 건조온도 등에 따른 차엽의 건조상수와 수분 확산계수를 조사한 결과는 다음과 같다. 평균 건조상수는 1번 차엽은 0.356/hr, 2번 차엽은 0.425/hr, 3번차엽은 0.477/hr로서, 건조온도가 높고 채엽시기가 늦을수록 또 유념을 할수록 증가하였고, 건조 전에 열을 많이 받은 시료일수록 컸으며, 생차엽은 0.403/hr, 증자차엽은 0.418/hr, 덖음차엽은 0.438/hr였다. 수분확산계수는 온도가 높고 유념을 할수록 증가하였으며 시료의 두께 및 직경의 영향을 크게 받았는데, 생차엽, 증자차엽 및 덖음차엽의 경우 평균 $1.162$\times$$10^{-8}$\m^2/hr,$ $1.896$\times$$10^{-8}$\m^2/hr$ $1.958$\times$$10^{-8}$\m^2/hr로서$ 생차엽에서 상당히 작았다. 또한 잎과 줄기의 평균확산 계수는 평균 $7.00$\times$$10^{-9}$\m^2/hr와$ $1.130$\times$$10^{-7}$\m^2/hr로서$ 줄기 쪽이 훨씬 컸다. 한편 수분확산의 활성화 에너지는 생차엽, 증자차엽 및 덖음차엽의 경우 평균 9.50, 9.48 및 9.51kcal/mol였고, 잎과 줄기의 경우는 평균 10.33과 8.67kcal/mol였다.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.4
• /
• pp.271-274
• /
• 1999

This study was undertaken to develop an efficient propagation technique for mature Betula davurica. Using aseptic materials taken from in vitro culture, the effects of media and plant growth regulators on shoot proliferation and rooting were investigated. DKW medium turned out to be the best in shoot proliferation among the media tested. Whereas axillary buds were better culture material than apical buds in proliferation of shoots, apical buds were slightly better than axillary buds on shoot elongation. Neither 1 /2 MS nor WPM medium seemed to be suitable for shoot multiplication or elongation. When the explants were cultured on 1/2 MS medium, shoot elongation was retarded by forming big callus at the base. In the case of WPM, shoots could be formed normally, but they exhibited slow growing. NAA was so effective on in vitro rooting that more than 80% rooting could be achieved on half-strength DKW medium supplemented with 1.0 mg/L NAA after 4 weeks in cultures. Ex vitro rooting using elongated shoot was also applicable to rooting and acclimatization. Rooted plantlets were successfully acclimatized in an artificial soil mixture and grew normally. The results demonstrate that efficient mass propagation of mature B. davurica can be done through tissue culture.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.4
• /
• pp.511-520
• /
• 2014

Kenaf (Hibiscus cannabinus L.) was recognized as a potential source of forage. To reduce the production cost, we should insure large cultivation area. The one of the best candidate places to expand the useful kenaf production was 'Saemangeum' reclaimed land. To confirm the possibility of kenaf growth in reclaimed land, we seeding and cultivated the kenaf in 'Saemangeum'. The germination percentage of kenaf on 5.0 dS/m soil salinity was 18%. It is less 66% than that of 4.0 dS/m soil salinity and at 6.0 dS/m, the germination percentage of kenaf was under 10%. The growth and development of kenaf in reclaimed land grew worse with increasing soil salinity. The stem diameter which the most important factor that decide the value and yield of product was upper 2.6 cm when soil salinity maintained under 4.0 dS/m, but if soil salinity marked over 4.0 dS/m, the stem diameter of kenaf was drop under 2.0 cm and it deteriorate the number of leaves per plant by 20~46%. The necrosis on older tip and marginal leaves were noted approximately first month after seeding which was correlated directly with the salinity levels of reclaimed soil. Reduction of total yield was coincide with increasing levels of EC. If soil salinity over 5.0 dS/m, the amount of decreased by soil salinity was 51% than that of non-reclaimed region. The allowable soil salinity level of which could be maintained within 20% reduction rate was 4.2 dS/m. Consequently kenaf can be grown successfully with moderately saline soil condition. However, salt levels in excess of 4.2 dS/m severely have restricted plant growth and development and will result in significant yield reduction.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.1
• /
• pp.17-23
• /
• 2004

This study was carried out to obtain the basic information on mating parents and selection for high yielding safflower breeding. Thirty nine world safflower lines, which had collected from 13 countries of origjn, were evaluated for major agronomic characters, correlation and path-coefficients. The results obtained were summarized as follows. Days to flowers ranged from 83 days to 100 days. Days to flower of most foreign lines were later than that of domestic lines. Plant height ranged from 75 cm to 162 cm. The plant height and stem diameter of most foreign lines were higher than those of domestic lines. The leaf number and size of domestic lines were much more than those of foreign lines. The total branch numbers of foreign lines were more than domestic lines. Particularly, the number of third branch ranged from 0 to 25 and there were none in domestic lines. The number of corolla of foreign lines was much more than that of domestic lines. The yield of foreign lines collected from Central Asia and United States of America were more than any others. Significantly positive correlations were observed between yield and days to flower, stem diameter, the number of branch and the number of corolla. In the analysis of path-coefficient, the highest direct effects on yield was the number of corolla followed by the number of total branch, whereas those of the number of second branch and stem diameter were negative.

• Journal of Korean Society of Forest Science
• /
• v.89 no.2
• /
• pp.216-222
• /
• 2000

Eleutherococcus senticosus (Rupr. et Maxim.) Harms is a tree species that has been traditionally used as a source for oriental folk medicine. It is known to contain both Eeleutheroside E and chlorogenic acid. These two compounds are believed to be effective elements in the tree. In the present study, we analyzed the levels of the two compounds from the plants collected from various locations in Korea to find out whether environment affected the quantity of both compounds in the tissue. When the plants growing in their natural habitats and those growing in plantations were compared, the level of the two compounds showed different pattern. In the case of chlorogenic acid in roots, the plants growing in plantations are found to contain higher levels than did those from natural habitats. On the other hand, higher levels of eleutheroside E were found in the plants from natural habitats. However, when the compounds in the stems were compared, the plants growing in the natural habitats contained higher level in both compounds than did those from plantations. Although the level of both compounds in the leaf tissue varied with the places from which they were originated, it appeared to be less than that found in roots or stems. There exists a tendency that the level of eleutheroside E showed a positive correlation with the diameter of both roots and stems of the plants.

• Horticultural Science & Technology
• /
• v.34 no.2
• /
• pp.269-281
• /
• 2016

The statistical analyses of coefficient of variation, heritability, and genetic advance were carried out to identify differences in morphological characteristics, such as the stem and inflorescence length, of 10 major commercial cultivars of spray chrysanthemum (Chrysanthemum morifolium). For morphological characteristics, stem lengths ranged from 46.4 cm to 54.9 cm, the maximum diameter of stem was 5.6 to 8.5 mm, the hardness of the stem was 0.17 to $0.70kg{\cdot}m^{-2}$, the fresh weight of stem was 7.5 to 17.5 g, the dry weight of the stem was 1.6 to 3.3 g, the ratio of dry weight/fresh weight of stem was 15.9% to 23.1%. Also, the number of leaves on the stem was 8.4 to 12.2, the stem leaf area was 17.8 to $37.8m^2$, the fresh weight stem leaves was 5.3 to 18.6 g, the dry weight was 0.5 to 1.4 g and the ratio of dry weight /fresh weight of stem leaves was 7.6% to 11.5%. The inflorescence length ranged from 10.1 to 18.6 cm, the fresh weight of inflorescence was 7.3 to 26.7 g, the dry weight of inflorescence was 1.2 to 2.8 g, the ratio of dry weight /fresh weight of inflorescence was 10.4% to 17.1%. For flower, the diameter of the flower center was 8.2 to 13.3 mm, the petal width was 5.7 to 14.0 mm, the petal length was 12.9 to 33.1 mm, and the petal thickness was 157.8 to $354.4{\mu}m$. The mean values of each character in each cultivar were very different, and DMRT and LSD values based on morphological characteristics among 10 cultivars were highly significant. For variability and genetic parameters, the lowest CV (coefficient of variation), PCV (phenotypic coefficient of variation), and GCV (genotypic coefficient of variation) were 4.79% to 5.15% in stem length, and the highest variations were 62.97% to 65.21% in leaf area. ECV (error or environmental coefficient of variation) was the lowest for leaf area (1.71%) and it was the highest for leaf dry weight (19.30%). Heritability also significantly differed among the characteristics, ranging from 68.69% to 99.67%, the lowest value was shown in ratio of dry weight /fresh weight of stem and the highest value was for leaf area of stem. The value for genetic advance was the lowest in hardness of stem at 0.30 and the highest in leaf thickness at 156.65. The lowest genetic advance as percentage of mean of stem hardness was 9.17%, while the highest percentage of stem length was 134.27%. Thus the characters which had the highest values indicated above show the influence of additive gene action and may provide useful resources for selection programs for agronomic improvement.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11b
• /
• pp.238-240
• /
• 2003

분포가 확대되어 가고 있는 미국자리공의 서식지 환경요인과 실생의 정착과정을 추적하였다. 그 결과 광 구배에 따라 기온의 차는 크지 않았으나 지온의 일교차는 4월을 제외하고 상대조도에 따라 크게 나타났다. 실생 출현은 100%에서는 61개체, 33%에서는 58개체였지만 8%에서는 5개제로 적었을 뿐만 아니라 출현한 실생도 모두 생존하지 못하였다. 생장은 상대조도 100%에서 가장 높았으며, 8%에서 출현한 개체들은 거의 생장하지 못하였고 줄기직경의 경우는 오히려 감소를 하였다. 따라서 미국자리공의 발아는 8%지역에서도 가능하였지만 광량의 부족으로 인하여 지속적인 물질생산을 할 수없어 생존할 수 없는 것으로 판단된다.

• Journal of Korean Society of Forest Science
• /
• v.87 no.1
• /
• pp.90-97
• /
• 1998

This study was carried out to compare the characteristics of relative conductivity(RC) in the twenty-one deciduous broad-leaved species. The results obtained were summarized as follows : 1. The RC ranged from $3.18{\times}10^{-15}$ to $1.23{\times}10^{-10}m^2$ in deciduous broad-leaved species, and appeared different values in various portions of a tree and species. 2. In eight diffuse-porous species, the ranges of average RC were $3.49{\times}10^{-13}$ to $6.35{\times}10^{-11}m^2$ in stems. $4.89{\times}10^{-13}$ to $2.99{\times}10^{-11}m^2$ in branches, and $1.33{\times}10^{-13}$ to $9.42{\times}10^{-12}m^2$ in junction part between stem and branch. In thirteen ring-porous species, the RCs were $7.14{\times}10^{-13}$ to $4.76{\times}10^{-11}m^2$ in stems, $2.93{\times}10^{-13}$ to $3.91{\times}10^{-11}m^2$ in branches, and $1.14{\times}10^{-13}$ to $9.20{\times}10^{-12}m^2$ in junction part. 3. The RC and diameter of stem have no interrelation in eight diffuse-porous species. The RC of stem increased with decreasing diameter of stem in eleven ring-porous species except Fraxinus mandshurica and Maackia amurensis. 4. In five deciduous broad-leaved species, the RC of 1-year-old shoots(the leader and adjacent laterals ) ranged from $4.87{\times}10^{-13}$ to $8.41{\times}10^{-11}m^2$ in the leaders, and $7.93{\times}10^{-14}$ to $2.01{\times}10^{-11}m^2$ in the adjacent laterals. The RCs were much greater in the leaders than in the adjacent laterals because of the hydraulic dominance of the leader shoot.