• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.140-145
• /
• 2017

A channel is very sever in an underwater acoustic communication. Therefore, a modulation method with high spectrum efficiency is needed in an underwater acoustic communication. PSK(phase shift keying) for transmitting 1 bit or 2 bits is robust to noise, but sensitive to noise about more than 3 bits. CPFSK error performance for transmitting 1 bit or 2 bits is similar to that of PSK and CPFSK decreases high frequency components in modulation signal. In the paper, I analyze the performance of trellis coded 4-CPFSK modulation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.98-103
• /
• 2008

There are the frequency shift keying(FSK), phase shift keying(PSK) and amplitude shift keying(ASK) in the conventional digital communications method. In this paper, We proposed a new robust wavelet shift keying system using scaling and wavelet function in the digital communication. Wavelet Transform consist of a low frequency and high frequency coefficient. When the input signal is one, if it finds the impulse response, the signal is separated from the scaling and wavelet function. The binary data is encoded by modulator which assigned the scaling function to 1(one), and wavelet to zero(0). It was demonstrated by experiment that the proposed algorithm can be a robust noise.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.3
• /
• pp.39-44
• /
• 2005

In this paper, we use the 5-ary frequency shift keying method for robust powerline communication. To transmit the data by the 3-ary carrires among 5-ary carrirers and three carriers are 115kHz, 120kHz and 125kHz. Each time of three carrires is 0.33ms and total transmitting time duration from zero crossing point has 1ms. We use the dummy carriers which are 50kHz and 350kHz for monitoring the powerline channel state, dummy signal duration is received during 1ms. Experimentation result is shown that the implemented PLC transceiver has better than chirp transceiver at the capacitive load testing in spite of low transmission power.

• Information and Communications Magazine
• /
• v.15 no.4
• /
• pp.77-88
• /
• 1998

주파수 경매 정책의 필요성은 이동통신 분야의 수요 급증 (98년 4월말 현재 CDMA 이동전화 가입자가 570만, 무선호출 1500만, PCS 가입자 300만)과 더불어 IMT-2000과 같은 무선 이동 멀티미디어 서비스 개발과 2000년부터 실시되는 디지털 방송 서비스 등을 위해 효율적 전파 자원인 주파수 관리가 필요하며, 전파사업의 국내 관련 기술의 조기 정착이 요구되고 있다. 따라서 전파 자원 관리도 이용자 편의 증진과 새로운 통신 서비스 측면에서도 적극적으로 검토되어야 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.1933-1938
• /
• 2008

There are the frequency shift keying(FSK), phase shift keying(PSK) and amplitude shift keying(ASK) in the conventional digital communications method. In this parer, We proposed the algorithm for wavelet shift keying system using a binary matching filter in the digital communication. Wavelet shift keying system are used to a scaling function(low frequency) and wavelet(high frequency) coefficients. The binary data is encoded by modulator which assigned the scaling function to 1(one), and wavelet to zero(0). Wavelet shift keying of the conventional method needs to a post-processing for the decoding. In this paper, wavelet shift keying signal is reconstructed by the decoder using a binary matching filter. So, it was able to the decoding without the post-processing. It was demonstrated by the experiment that the proposed algorithm is a validity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.2
• /
• pp.245-250
• /
• 2014

This paper introduces the inverse synthetic aperture radar(ISAR) imaging technique for rear view target of an automobile, which uses both linear frequency modulation-frequency shift keying(LFM-FSK) waveform and monopulse tracking. LFM-FSK waveform consists of two sequential stepped frequency waveforms with some frequency offset, and thus, can be used to generate ISAR images of rear view target of an automobile. However, ISAR images can often be blurred due to non-uniform change rate of relative aspect angle between radar and target. In order to address this problem, one-dimensional(1-D) Lagrange interpolation technique in conjunction with angle information obtained from the monopulse tracking is applied to generate uniform data across the radar's aspect angle. Simulation results show that the proposed method can provide focused ISAR images.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.7A
• /
• pp.1152-1161
• /
• 2001

본 논문에서는 이동국 수신 신호의 SINR을 최대화하는 빔 성형 알고리듬을 이용하여, 폐쇄 루프 송신 빔 성형기술을 적용한 순방향 링크 CDMA 시스템에서의 안테나 수, 귀환 채널의 구조, 귀환 지연 등과 시스템 성능과의 상관관계를 연구하였다. 폐쇄 루프 전송 빔 성형에서는 이동국이 각 안테나가 겪는 채널을 추정하여 수신 SINR을 최대화시키는 가중치 벡터를 계산하고, 귀환채널을 통해 가중치 벡터의 양자화된 진폭과 위상정보를 전송한다. 컴퓨터 모의 실험 결과는 송신 안테나가 2개, 3개, 4개로 늘어남에 따라 빔 성형 이득은 단일 송신 안테나와 비교해 $10^{-5}$ BER 근방에서 4.2dB, 5.8dB, 7dB로 증가하지만 양자화 오류에 의한 성능 저하 또한 0.1dB, 0.6dB, 1.3dB로 커지는 것을 보여준다. 또한 순방향 채널의 최대 도플러 주파수가 100Hz일 때에는 귀환 채널을 통한 소신 가중치 벡터를 보다 빠르게 갱신하는 것이 가중치 벡터의 양자화 레벨의 수를 늘여주는 것보다 $10^{-5}$ BER 근방에서 0.6dB 더 좋은 성능을 보이며, 최대 도플러 주파수가 10Hz일 때에는 가중치 벡터의 갱신 속도를 늘이기 보다 양자화 레벨의 수를 늘여주어 정확한 가중치 벡터를 전송하는 편이 0.9dB의 성능 향상을 보인다. 두 전력제어 그룹 길이의 귀환지연으로 인한 성능저하는 채널의 최대 도플러 주파수가 50Hz인 경우가 채널의 최대 도플러 주파수가 100Hz인 경우보다 $10^{-5}$ BER 근방에서 0.3dB 정도 더 작다. 또한 AOS가 3$^{\circ}$인 경우가 AOS가 $10^{\circ}$인 경우보다 $10^{-5}$ BER 근방에서 1.9dB 정도, 주파수 선택적 페이딩 채널이 주파수 비선택적 페이딩 채널보다 $10^{-5}$ BER 근방에서 1dB 정도 귀환 지연으로 인한 성능의 저하가 작다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.4
• /
• pp.1-6
• /
• 1984

An algorithm for the implementation of R2 MFC digital receiver is evaluated using simulated data. The algorithms satisfy the CCITT recommendations. In this paper, our aim is to provide more efficient way of decoding an input in PCM format and detecting the frequency components. The digital signal processor chip (S2811) is suggested to meet these aims Through the software simulation using an Altair 8800b microcomputer, the proposed receiver is shown to have tolerable performance in spite of a given noise, frequency drift, and twist.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.2
• /
• pp.91-97
• /
• 2015

In this paper, wireless communication from a smart phone to a hearing aid using audible frequency band sound was considered. 1kHz single channel carrier frequency was applied for amplitude shift keying (ASK) binary data modulation, and the result of the transmission and reception was tested. The overall system process was precisely explained and experimentally evaluated. The result will be applied for realizing a digital hearing aid with remote control feature by a smart phone.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.5
• /
• pp.89-96
• /
• 2012

The rubber side could be contaminated using the existing pulse echo method because the ultrasonic wave was incident on the rubber side from the interior of the steel motor case, which could lead to the critical disbond defect. To develop the test method which can be replaced the existing method, the ultrasonic wave was incident on steel face of the steel/rubber adhesive test block. Rubber resonance frequencies measured from the steel/rubber adhesive test block were in good agreement with theoretically predicted rubber resonance frequencies. This paper was described about the ultrasonic resonance method to convert the rubber resonance frequency into the rubber thickness.